Nikolay Kerezov

Have a look at this: http://cgi.ebay.com/Portable-Mini-DVR-Secu...p3286.m20.l1116 I have two of those by the time the price was 500+ usd.It worth every cent! Best!

Crossing my Fingers!!!

Asking $3300 now! Going down again!!$3000 us this sled is in super great condition...re-machined and all new electronic.... It a great deal for starter kit!! The Sled included: 1x Donkey Stage Newly machine condition(Brand New). 1x Brand new 1,5'' post two stage. 1x Original A3 Gimbal service 6 mouth ago,condition(normal wear) 1x A3 D-box(normal wear) 1x J-box with battery mount 12/24 volt(normal wear) 4x Brand new recell Pag battery. 2x Battery that needs re.... 1x PAG Charger four chanel.(normal wear) 1x Monitor Braquet(normal wear) A few power cable Arri,12volt,BNC...ect 1x Pelican case for Sled. 1xPelican case for Batt and charger. If you need more Pic let me know or you could call me for more info!! Mathieu (514)995-7254 Montreal Canada. Shipping is not included!!! Last call!!$2500 us + Shipping ....wish I have cash.....

Hope they have it in stock,last time they didn't. I'll need one soon :(

I say you hand carry it to Magnus and have a great vacation! The best advice EVER! I will look in my equipment for something made around Galapagos islands or the big barrier reef :P

Marianne, No doubt your monitor is great (never seeing it ,but heard lot of good thinks),but everyone can make his own choice witch monitor to use. Almost non of us need any of the options like : WAVEFORM YRGB, VECTORSCOPE, HISTOGRAM, EXPOSURE CONTROL. My point is that in a world financial crisis difference between 4k+ and 6k+ can be killer for each one of us . So please don't be so passionate and let the people choose! Best Regards from Sofia! Nikolay Kerezov Steadicam Operator/Owner Little Co. HD monitor designer

If it still under warranty just send it. It is not only the noise,it will start shaking and some big "black holes " in some positions. The two I have repaired are not mine,but one of mine is going there(I have 32's) Best!

Jess, I have service this kind of motor twice ,both times the problem was the potentiometer (I've done on "p" model ,but vp is with pot.too). It's a tricky business,but not so hard to do .You will need very small Allan key I believe was .9 0r .75 mm ,than a 9mm long key(latherman will work too) Unfortunately the pot. is a bit expensive(will be more than 250usd in US) and hard to find.Here is the model: Vishay Spectrol ; mod. 162-11103 ;res 10k +/-5% ;lin +/- .3% I'll try to post a pic. Regards!

Mister Eric Fletcher will have ser# 1 for tests when is ready. Best to all!

I can only give two important reasons,why do I prefer My monitor: 1: HD-SDI 2:LED backlit (more than 30% less power) If you want I can give you more ,such as the monitor will be costume made for each costumer,the menu is HUGE with thons of options...and so on Nikolay, I think I speak for a large portion of us ops when I say, If you have a: • 6.5"- 7" , 16x9 LCD Daybright monitor, 900nit or higher • HD/SDI/Analog/Component inputs • Frame Line Generator • and digital Level then you have the ultimate monitor and all of us would love to see it, test it and buy it, especially if it's under 4-5k So, PLEASE, send photo's specs and hook some of us up for field testing and we'll all give you are honest opinion. Thanks for giving us an option for something different You can see the first prototype here: http://www.steadicamforum.com/index.php?showtopic=9448 Difference will be that the new electronics will have framelines,but no level and will be anodized not painted. I'll hook up some of you guys when the first one is ready.I'm planning to send it over there to some of you "active" members of the forum ,so you can spared the news ;-) If anyone of you guys want to be this person ,please let me know Regards!

I can only give two important reasons,why do I prefer My monitor: 1: HD-SDI 2:LED backlit (more than 30% less power) If you want I can give you more ,such as the monitor will be costume made for each costumer,the menu is HUGE with thons of options...and so on

Hello Guys, I'm waiting for new electronics (with framelines and HDMI) and I'll announce what we all need : 6.5" daylightreadable steadicam monitor for less than 5k. This will hopefully takes no more than 40 days. Regards!

I'm not sure who of you guys is right and who is not ,but here are the facts for my cables: HQ BNC connector Amphenol RG 179 - 6,50 EUR for a pcs. HQ RG179 Lightweight 75 ohm BNC Cable-7,20 EUR per mt. HQ Crimp tool (I have 4-AMP)- 250 + EUR + 20% VAT Good quality its expensive! So you can choose to make or not to make! Best from me!

Diversity is the best choice I believe,but first you must know that "Avalon Dx604" and the Coherent will not work with modulus 3000!!! Avalon Dx604 will only work in the 2.4 Ghz band and the Coherent it the 1.5 Ghz band.So may be Quad Mod must be your choice. Best!

As a costume design solution I can add a heather,but I don't think it's necessary.I have test the monitor at -10 degree Celsius and it worked without a problem at all. Also after few minutes the electronics heating itself. Regards!

Yes I can make support for Ultra if you can give me:rods diameter and the distance betwin them. Regards!

I'll move closer to you guys...............

I bet they going to find someone within two days!

Good point!!!!Realy Forgot. 60/80/80/80-up/down/right/left or if you prefer 160/150 Best!

Here is the Back of the monitor. Tanks to : Brant S. Fagan!!!!! Cheers!

you have web? If you meen web page i don't! I've send you my skype name on a message if you prefer this way. Regards!

I hope this answers the question! Regards!

Panel resolution: 1024x768 @ 6.5" LED Backlit (low power consumption) Luminance: 650 cd/m2 Contrast Ratio : 600:1 Daylight viewable (close to transflective technology) AR coated Power....................................10-18 volt (10-36volt is option) Power consumption is ONLY 900mA@12 volt at FULL power Working temperature - -10 C to 70 C (I have test it at -7) Video Inputs.......................... 2xComposite Video(BNC),1xHD/SD-SDI(2nd is option),others as HD component,VGA and so on are option 1x 8 pin Lemo -Power/Video (Pro,Mk-V,Rig standard-other on request) HD Mode Resolution : 480p/60 720x483 576p/50 720x576 720p/60 1280x720 720p/23.89 1280x720 720p/24 1280x720 720p/25 1280x720 720p/29.97 1280x720 720p/30 1280x720 1035i/30 1920x1035 1080i/50 1920x1080 1080i/50 1920x1080 1080i/29 1920x1080 1080i/30 1920x1080 1080p/25 1920x10801080p/30 1920x1080 COMPOSITE System Resolution: NTSC 720x480 NTSC 4.43 720x480 PAL 720x576,PAL M 720x576SECAM 720x576 Picture in Picture (this function can only work HD over SD or SD over HD) Flip Horizontal, Flip Vertical, Rotate Picture: Brightness, Contrast, Saturation, Hue, Sharpness (can be used as peaking for focus supervising ) Aspect Ratio Sizes: 4:3, 16:9, 16:10, 2.35:1, 2:1, 1:1 Custom sizing: Under-scan, Normal, Custom Zoom Blue Only Gamma: 1.0/1.6/2.2 OSD: position and time to remain on screen, transparency Color temperatures: 5000k, 6500k, 8000k, 9300k, User Monochrome Mode: red only, green only, blue only. Hot Keys No FAN Dimensions: 190mmx170mmx50mm Weight (aluminum body):1900gr. Options:Tally,5 volt out,12 volt out,better ask for any other No frame line generator and level at this time ,but I'm working on it. Price will be around 3300 EUR for the solid Alumin. body and around 2700 EUR for the metal body ACTIVE members of STEADICAMFORUM will use 10% discount Estimate lead time- 40 days

Attachment space used 1.63MB of 1.54MB-??????????

If you want some relaxation Scuba Diving is great. YES, YES, YES... but can get about as pricey as our profession... If you can't stop yourself from buying stuff(like me),it is expensive. I'm about to order UW housing for RED now.......