Osvaldo Silvera SOC

Hi folks. here is an XCS Monitor Bracket. Comes with the Mounting spigot XCS no tools post clamp for XCS 2" post Great lightweight monitor bracket. ready to mount several monitors with the right bracket underneath. Shipping included anywhere in the Continental US $550. Marshall 7" Monitor HD/SDI with Anton Bauer back I installed a Transvideo mounting bracket underneath so you can use it with the many monitor brackets out there that have spigots. Great shape, works great!. I only use this monitor indoors on studio live shows, so that's most of the life it's seen. It's not a Daylight bright model, but with a makeshift lens hood I've done well outside with it. Model #V-R70P-HDSDI with the Anton Bauer back and the Transvideo mounting bracket. $1000 shipped

Back to the top. Comes with the SD cable that you could easily sell to off set the cost of the HD cable if your upgrading.

BTTT

That's way cool!

Hi folks. If you had the pro/gpi made mounting bracket for the Transvideo cinemonitor HD6 and then changed to a yoke mount, and want to sell the mounting bracket plate that screws underneath the monitor and accepts the pro spigot. Please let me know. Just trying to save over buying new when some ops may have them laying around. Please email me. Thanks Ozzie@silverafilm.com

Thanks guys ask taken care of.

What Alfeo mentioned at the end there is exactly why the reality show I'm on now is Union. Some shows have a lot of different producing companies, if even one of them has a standing agreement with the IA, then everything they are attached to may have to be IA, now...if the production gets finished and no one called it in or connected the dots, then.....it's water under the bridge.

The system is no longer available for the time being. Partial sale pending payment.

Sold

Ron, Andy, What size is your NF duffle? they have several sizes.

I thought of that at one point. I hope you got a great deal on that backpack, cause $275 is a bit ( very) steep, when the Modular51 one cost 190

Hi folks looking for the name of the folks who make the vest bag that is sometimes seen here. I seem to remember reading a post where the actual manufacturer wrote in here. I'd like to qet it quick so rather deal with someone who can get it to me at a reasonable pace. Are there several retailers? Ozzie

Looking for great condition vest case. Who has em? Or one to sell? Semi rigid is a good thing. One where I can put an arm in it's sleeve/bag in there as wel Email me, Thanks, Ozzie Ozzie@silverafilm.com

Hi folks here is an Arm bag I've used with my 3A arm for many years. For sale, Available for immediate shipping via USPS Priority. It's in good shape. The zipper had a small tear in it. The ziper works fine but the tear is just off the edge of where the zipper meets the fabric. May be something easy for a seamstress at a shoe shop or dry cleaners to repair, still works, I used it in exactly this condition for nearly 6 years since the tear happened. Price includes shipping anywhere in te continental US via USPS Priority. Thanks for looking

WOW, I had no idea those were that expensive! Technocranes are that much!

200 thousand for a dolly? which MODEL?

Hi folks. I used this set up on a season of Mira Quien Baila ( Spanish Dancing with the stars) and a couple of Music videos, so it all works great. Here is what it's made up of. Hill top stage box, with all the PRO connectors, Plus Tally and two BNC's, One HD, one SD Composite Has the quick disconnect underneath. I used it with my 2" XCS/PRO post Lower stage is like a Steadyrig lower stage, only HD Has the quick disconnect on top. A Pro 1.5 base with the two BNC's, one HD, on SD Composite, I added the Tally connector underneath or the LED light. Added an AUX power port like the one above on the top stage. Then there is a Steadyrig hanger on it and all 3 of the plates have the diodes on them so there is no feedback between the plates. I've kept them as back ups, but I have 2 sleds now, a lite HD and a ProGen3HD, so these can go to a new home. All you need is a DB, a post, gimbal and HD cable from PRO or XCS and your set. Email for more pics if interested. Price $5200. includes shipping.

Back to the top

Hi folks. Dropping the price just to get it out the door. No shipping is included at this price. You pick your shipping method and I will price it out and let you know. I Accept Checks or Money Orders, Paypal is accepted with a 3% premium added. $1100. It's currently on Ebay, but here it's at a lower price for the steadicam community.

BTTT

Cinetronic ( Film-Stuff.com) sells refurbished 6.5 models with a yoke for $2265. Add a power cable and a small case and your around 2450.

This 2" Super Post will go great with that PRO/XCS sled thats for sale on here. $2300.

I have a Steadyrig batt hanger and the adapter plate to attach it to a PRO 2/3 lower Electronics stage available. Email off forum if you'd like pics, etc..

$1200. Takes it

Done Ill take it.