-
Posts
42 -
Joined
-
Last visited
-
Days Won
3
Posts posted by Quaid Cde Baca
-
-
M1 tilting top stage WITHOUT the volt brain. I'm keeping that :)
I upgraded to the M2 with built in volt brain immediately when it came out and haven't needed the M1 since. It is vastly more robust and stronger, but all my jobs lately have been within the weight range.
It's been neatly wrapped and stored in my closet since January 8th, 2020
$5,000 USD
PLEASE EMAIL: QuaidCdeBaca@Gmail.com
LA located and sale preferred, but will ship domestically - buyer pays shipping.
-
Hey Sandy, did this sell?
-
Hey guys!
It's out! The slimmest, and lightest, fixed 3rd battery mount for the M1 sled base, WITH power passthrough to the sled.
This is a solution to the existing heavier and larger, 3rd battery mounts. So here ya' go!Specs:
• Gold Mount & V-Mount available.
• Genuine Anton Bauer gold mount and V-Mount plates.
• Mounts fixed to the M1 base bottom cheese plate.
• Independent power supply to the sled (24v supply boost too).
• The thinnest and lightest M1, 3rd battery mount available.
• Genuine 0b size right angle lemo connector, Canare cable, and strain relief.
• All mounting hardware included.Price:
$550Email me for sales and inquiries at:
QuaidCdeBaca@Gmail.com*LA located.
**Will ship at buyer's expense (international too). -
Hey guys!
It's out! The slimmest, and lightest, fixed 3rd battery mount for the M1 sled base, WITH power passthrough to the sled.
This is a solution to existing heavier and larger, 3rd battery mounts for the M1. So here ya' go!
Specs:
• Gold Mount & V-Mount available.
• Genuine Anton Bauer gold mount and V-Mount plates.
• Mounts fixed to the M1 base bottom cheese plate.
• Independent power supply to the sled (24v supply boost too).
• The thinnest and lightest M1, 3rd battery mount available.
• Genuine 0b size right angle lemo connector, Canare cable, and strain relief.
• All mounting hardware included.
Price:
$550
Email me for sales and inquiries at (I do NOT check my inbox on this site):
QuaidCdeBaca@Gmail.com
*LA located.
**Will ship at buyer's expense (international too).
-
Selling my Preston kit with 3 motors and a BRAND-NEW MRD-4 (never rented out, never seen a job, straight out of the box, and tested only). Gear has been recently serviced and updated by Preston. Just want to get out what I put into it.
$15,500.00
Email me for inquiries: Quaid Cde Baca @ Gmail .com
Located in Los Angeles: Atwater Village, CA.
Will ship at buyers expense/ LA pick-up preferred.
More photos on the Facebook ad here:
- Hand Unit 3
- Hand Unit 3 Rubber Hand Grip
- Hand Unit 3 Batteries
- Hand Unit 3 Battery Charger
- Hand Unit 3 Battery Charger Power Cables
- Hand Unit 3 Focus Rings
- Hand Unit 3 lemo to VGA software cable
- Jerry Hill HU Rain Cover Pouch
- MDR-2 G4 Blue Dot Controller
- MDR-2 to MDR-1 Control Cable Adapter
- MDR-1 to Alexa 3-pin Run/ Stop Cable
- MDR-2 to Panavision Run/ Stop Cable
- MDR-2 to Hand Unit 3 25' Command Cable
- MDR-2 to XLR-3 pin Power Cable
- MDR-2 to P-tap Power Cable
- MDR-2 Power/ Run/ Stop to Alexa Y-cable
- MDR Mounting Paddle
- MDR-4 Controller
- MDR-4 Wooden Camera X mounting bracket
- MDR-4 to P-Tap power cable
- MDR-4 to Arri 3-pin Run/ Stop
- MDR-4 to Sony HIROSE Run/ Stop
- (2) DM-1 Motors
- (1) DM-2 Motor
- Uni-Clamp PAM Kit
- 15mm PAM kit
- PAM Motor Mounting Bracket
- Right Angel to Right Angel Motor Cable
- Right Angel to Straight Angel
- Motor Cable Pitch Gears
- Custom Foam Cut-out Case
-
Selling on behalf of a friend. Please contact him below for info.
LA located.
Asking USD $1,900 OBO
Contact:
zacharymprice4@gmail.com
- 1
-
Thats one mighty fine beauty right there. Killer package! <3
If you're selling because you're doin' what I think you're doin', then keep doin' what you're doin'.
;)
-
-
Garfield hard mount:
Speed rail mount
Mitchel mount base
Mitchel tie down
Tiffen socket block (for both arms)
LA located (Atwater Village) for pick up or buyer pays shipping.
Email for inquires: QuaidCdeBaca@Gmail.com
-
JUST GIVE HIM THE CAMJAM SHAWN!
Kidding, it's a sweet level. I wonder if you can just make one to snap onto new yokes and other yokes?
- 1
-
-
*Posting for a friend*
Selling my well cared for G-50 arm. Recently serviced and is up to tiffen standards and ready for a new home. Has some cosmetic scratches on the outside but nothing major. Would like to sell in LA but am open to selling worldwide, buyer pays shipping.
$6250
Arm is in LA
**Email for inquires: jamesmarin8888@gmail.com
-
$6750
And single sided V mount sandwich plate is included now. -
V mount sandwich plate now included
-
2000 kit for sale
Upgrading my personal wireless and posting up my trusty Teradek Bolt 2000 1:2 kit. Just returned from Teradek for a service check up. A clean system.
- (1) TX
- (2) RX
- (3) P-Tap power cables
- (2) AC power cables
- Case
- (2) coiled BNC
- (1) thin line BNC
- (3) mounting screws
- (1) 1/4”-20 to baby pin mount
- 1:2 Teradek Bolt case*AB 'sandwich' plate NOT included.
$7,000 USD
Email: QuaidCdeBaca@Gmail.com
-
Selling an LX vest. Selling worldwide as long as buyer pays shipping. Vest is in good condition and if you are in Los Angeles you can come check it out for your self
**Contact:
Email for shipping/ international injuries.
Located in LA.
$2,000 USD
-
$4000 USD
Email for shipping/ international injuries.
Located in LA.
-
*Posting for a friend
Up for sale is my very well cared for, and extremely reliable RT Motion wireless follow focus (now called Teradek RT since teradek acquired them). I love this unit as it is very reliable, very easy to use with a great menu system. Tiny MDR that is great for smaller builds and gimbals. The motor is very strong and can pull on stiff glass. Absolutely great unit. For sale worldwide as long as buyer pays shipping!
Comes with everything you need plus a pelican case
- Hand Unit (and 2 lens rings)
- MDR
- (1) Motor
- Power cables and a DSMC2 Run Stop cable
- Thumbwheel, perfect for gimbals on smaller shoots, or handheld doc work.
- (2) Batteries
- (1) ChargerContact:
-
Try Robert Luna. He can make you one, lighter, stronger, and cheaper than what you would get from Pro or Tiffen. Mine was ~$400 and couldn't be happier
-
-
-
SOLD
Sent from my iPhone using Tapatalk
-
-
$24,000
I have extra gear (batts, cables, docks, if you need to add on $$)
Sent from my iPhone using Tapatalk
Preston FIZ 3 + MDR-4
in Steadicam Marketplace - For Sale
Posted
Oh shoot ha sorry I do not.
But I do hav another FIX package for sale.
$25,500
HU3
MDR3
(3) DM2s
MF Digital 2 (+MF panhandle and cables)
Cabled Iris unit
IMG_0864.HEIC