Leaderboard

I spoke with David Bredbury from SmallHD this morning and he answered a few questions I had about the monitor. The 703 will draw about 12W-13W of power. Currently there are two 1/4 20 mounting holes on the back (one near the top and one near the bottom) and one on top of the monitor and one on the bottom. There are no holes on the side. They are working on a modular "cage" system that adds more mounting points. With the cage system mentioned, there will also be a shade available that can be mounted onto the monitor. The 703 uses a different molex connector on the back compared to the DP7-series. See the attached PDF file to see the wiring. David says the screw mounting configuration for the V-Mount and Anton Bauer plates should be compatible but for the Sony L-series battery plate, you may have to modify it a bit. Despite what videos on Youtube shows, the functions buttons can be assigned to specific functions and not just pages. Apparently heat dissipation shouldn't be an issue. They are aware of the heat issues with the 502 and David says this monitor runs cooler and it shouldn't be a problem. DRW_CBL-MOLEX8P-LEADS_A.PDF