Leaderboard

This is a 1st Gen Steadicam Flyer package that I picked up last summer and modified as a project. Now for sale! The Flyer was the first of Tiffen’s really serious lightweight rigs that could be used for professional jobs. It supports cameras in the 15 pound range, which while limiting for big jobs, would allow you to fly a lot of the smaller cinema cameras that are now out. This rig has been re-wired for an HD-SDI line down the post, as well as a more modern Tiffen-standard 3 pin power plug. The rig has a baseplate with standard 15mm rods on it, allowing for monitor and battery mounting, and a lot of flexibility in terms of which monitor you can use. Includes arm and vest, both in working order, though all of the pieces show signs of use. Asking $2000 for this rig (arm, vest, and sled together) plus shipping, or pickup in the New York/NJ area. Contact me at willsvideo@gmail.com or 215-796-8938 if you’re interested (please be patient, as I’m working!)

Marty here, Loosen the two button head socket screws located on the stage top. I believe it is a 1/8 hex, loosen these screws and re-torque them gradually while checking the cross shaft to see if it gets tight. If this does'nt do it there is two set screws located in the dovetail which these button head are screwed in to. Carefully back these of 1/16 of a turn and tighten button heads making sure there is no play in the dovetail plate. If you need more help just call us. Marty Joseph Tiffen Co 818 843-4600 Ex 20