Jump to content

Thomas Gottschalk

Sustaining Members
  • Content Count

    24
  • Joined

  • Last visited

Everything posted by Thomas Gottschalk

  1. Thomas Gottschalk

    Steadicam M1 Volt

    Hi all, I just updated a Betz Rig with a Volt System. I ordered only the Steadicam M1 docking fork with it, because it connects with the my beloved Jerry Hill Docking Bracket. But after the first couple of days with my this new docking system I am not entirely happy yet. The Volt-fork fits the body of the Hill bracket well. But since the collar of the plastic inlay of the Volt-fork is rather high, I can´t pull the balancing rod over the fork anymore. I would like to mill out the plastic collar/insert of the bracket, so the balancing rod of the Hill bracket can slide over the fork again. Not sure if the plastic inlay would survive the surgery... Is anyone using the same fork/bracket combination? Anyone done anything similar yet?
  2. Thomas Gottschalk

    Batt powered push-button (timed off) LED to backlight spirit level

    Hey Alan, did you find anything yet? I am dreaming of the same thing...Light up the bubble on the back of the Betz... ;-)
  3. Thomas Gottschalk

    Wave-1 and Gyro combination?

    Thank You, Alec ! That sounds very interesting. I will definitely try your system out. Best wishes Thomas
  4. Thomas Gottschalk

    Wave-1 and Gyro combination?

    Hi everyone, I wonder if anyone tried out a combination of the Wave-1 and Gyros? What´s your experience? Fly safe everyone! Thomas
  5. Thomas Gottschalk

    Looking for an Omega AR

    Looking for an Omega AR. Last version.
  6. Thomas Gottschalk

    Looking for an Omega AR

    Bump.Bump. :-)
  7. Thomas Gottschalk

    Share your production myths!

    Hi there, tuning in from Europe, this is some very interesting read, but excuse me, what exactly does "pro rated" and "non pro rated" mean?
  8. Looking for a Betz Tools stick zoom control.
  9. Thomas Gottschalk

    Hill Mag Dock 2 wanted

    Hi there, looking for a used Hill Mag Dock 2.
  10. Thomas Gottschalk

    Wave-1 and Gyro combination?

    Which axis did you stabilize witzh the gyro?
  11. I am selling my modified Hyperdeck Shuttle 2. This version records uncompressed, DNxHD, and ProRes. The modifications are: - Standard size BNC-connectors for HDSDI In and Out, rewired to the board at ARRI in Munich. - "Power in" modified to Lemo 2-pin connector - AB Gold Mount plates on top and bottom of the Hyperdeck. - Power input selector switch This Hyperdeck can be powered in two ways, selectable via the power selector switch next to the BNC-connectors: 1. from your sled/ camera via its 2-pin Lemo socket. 2. by an AB battery attached to the female AB Gold Mount Adapter. At the same time an AB battery attached to the female AB Gold Mount Adapter will feed power directly through to the male AB Gold Mount Adapter. This means you can "sandwich" the Hyperdeck in between a battery and your sled/camera. Can also be used to convert from HDSDI to HDMI and vice versa ! Comes with the 256 GB Samsung SSD and SSD to 2x USB adapter cable. Works great. Asking USD $ 850 OBO Buyer pays shipping. Item located in Europe. Fly safe! T.
  12. Thomas Gottschalk

    Set of Antlers V3

    Selling a nice set of Antlers V3. Like new condition. Asking USD $ 950 Buyer pays for shipping. Item located in Europe. Fly safe! T.
  13. Thomas Gottschalk

    Set of Antlers V3

    Bump!
  14. Selling a used Teradek Cube 150 Tx On Board HDSDI to H.264 Video Streaming Encoder: Great for on-set video streaming to IPhones / IPads. -HD-SDI Input -External USB Port -Dual Band WiFi (2.4/5.8 GHz) -WiFi Range - 300' (91m) -4G Support / Setup Wizard -H.264 (Level 4.1) Video Compression -Built-in Scaler -End-to-End Latency - 1/8-1/2 sec -Low Power Consumption 6-28V (2.5W) - 110/220V Power supply included Asking price $600,00 OBO. Will ship worldwide. Buyer pays shipping
  15. Thomas Gottschalk

    J-Bracket with Knob

    Selling a nice J-Bracket with a very comfortable knob on the top. Made by Baerbel Cam-Tec in Germany. Asking price $ 250,00 OBO Happy to ship worldwide. Buyer pays shipping. Fly safe!
  16. Thomas Gottschalk

    J-Bracket with Knob

    Bump
  17. Thomas Gottschalk

    Set of Antlers V3

    Bump!
  18. Selling a used J7-zoom controller for the steadicam gimbal-handle. comes with 12 pin Fuji and 8 pin Canon adapter cables. Asking price USD $250. Buyer pays for shipping. Item located in Europe. Will ship worldwide. Fly safe!
  19. Thomas Gottschalk

    J7 Gimbal Zoom Controller

    SOLD Thank You!
  20. Thomas Gottschalk

    J7 Gimbal Zoom Controller

    Sale pending!
  21. Thomas Gottschalk

    XARM

    I heard something around € 10.000 thats just south of $ 12.000.
×