Jump to content

Osman 'Ozzy' Oksuz

Premium Members
  • Posts

    51
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Osman 'Ozzy' Oksuz

  1. Thanks :) This one you see on the picture I had made by a guy in Istanbul. It looked nice, but was made of too many layers and the adhesive he used wasn’t very good. I just had it remade like a month ago by 2eyetec in Munich. But it’s pretty much the same setup. Cheers
  2. Hi everyone I am selling here my GPI Pro Cine Live Rig with a Tiffen Volt in a bundle and quite a few extras. Couple of notes upfront, the rig has been checked and serviced in September of this year at Optical Support in London, it has some minor cosmetic wear but is fully functional and in very good condition (see pictures). List of items that will be coming with the package. * 1 x GPI Pro Cine Live Rig (battery rack Gen III (AB), OS DBIIIs Topstage with 15 mm bars, Volt padded dock) * 1 x Tiffen Volt Kit (on a Pro gimbal!) * 1 x OS Products monitor bracket * 1 x Smartsystem 7” Monitor SM7-3K-Z with integrated Zenmuse level indicator (there is a screenprotector on the screen on the photo) * 1 x Volt lowmode dock ring * 1 x lowmode monitor bracket for Transvideo Starlite (no Starlite monitor incl.!) * 2 x 1.5” Docking rings (no Jerry Hill docking bracket incl.!) * following cables incl.: Pro rig > Smartsystem Mon power cable, Pro rig > Alexa Mini, Mini LF, Amira 12V Power cable, Pro rig > 24V Alexa 35 Power cable, Pro rig > 12V XLR Power cable, Pro rig > 24V Alexa Plus Fischer Power cable * 3 different Jumper Blocks (12V parallel, 24V parallel, 12V only two rear batteries) * 1 x Peli Case iM3220 with custom fit foam inlay to transport the Rig (custom design) Further notes: Requests from within the EU will be preferred!! Buyer pays transaction fees and shipping fees. Price: 36000 € EUR (plus taxes, only if you're based in Germany) For further questions and details shoot me a message. Cheers Ozzy
  3. Hi Toby Yes I managed to sell it beginning of last year. Must have forgotten to mark it as sold here. Cheers
  4. Hi everyone I'm selling here my ARRI Wheels along with the ERM-2400 LCS kit and some cables, all packed in a Peli 1560 case. I have purchased them all in August 2022 in order to use them with my TRINITY 2 to have the option to control the roll and the tilt axis externally by a second operator or the DP. I haven't used them so far on any production, only set them up twice for testing at a camera rental, hence they're in pristine condition. The wheels will also work with the SRH-360 head when linked with the corresponding ERM kit. Setup contains: • 1 Set of ARRI Wheels (2 axis control) • 1 ERM-2400 LCS kit (TX, RX, 2 antennas and various cables) • 1 CSS Mitchell Mount • 1 Peli 1560 hardcase with inlay The ERM have a connectivity range of approx. 1000 m (3000 ft.) I'm asking 13000 € (if you're based in Germany that's +VAT), buyer pays for shipping and any occuring money transfer fees. EU sales will be preferred!! Shoot me a message if you have any questions or want more detailed pictures. Cheers Ozzy
  5. This item is now for sale through another post, please ignore this earlier post and refer to my new post from Jan 16, 2023. Thx
  6. Hello everyone I‘m selling my backup monitor with its artemis monitor bracket. The monitor is a Transvideo 6“ Cinemonitor x-sbl (red knob). The bracket is an ARRI Artemis monitor bracket with a postclamp. Both items are used and show corresponding signs of usage, as shown in the pictures. Both items are in perfect working condition. This monitor package is adaptable to most rigs and I prefer to sell the items together, if possible. Please note, the clamp adaptor ring to use the postclamp with a 1.5" posts will not be included (small plastic ring adapters). The monitor comes along with a small Peli case from Transvideo. Buyer pays any occuring shipping and money transfer fees. PRICE: 3000 € (plus VAT/MWSt. if you're based in Germany) Shoot me a message for further questions Cheers
  7. Hi everyone As I have moved on to the Trinity 2, I am selling here my Trinity (1) with quite a few extras. A couple of notes upfront, the head has been checked and serviced last week at FOMA and all calibrations and values are factory reset. The Rig has obviously cosmetic wear but is fully functional. It also has all the available upgrades done (24V upgrade, quicklock upgrade (head), pendulum upgrade). List of items that will come with the package. 1 x ARRI Trinity Head 1 x ARRI Trinity Joystick 1 x Transvideo ARRI Starlite 5" monitor (with extra power cable for external use) 1 x ARRI Trinity joystick 1 x ARRI Starlite monitor mounting bracket 1 x ARRI Trinity joystick main cable 1 x ARRI Trinity joystick > Starlite monitor powercable (5pin Lemo angled > 5pin Lemo straight) 1 x ARRI Trinity/Artemis 1.8" post with fine adjustment 1 x ARRI Trinity/Artemis 1.8" gimbal 1 x ARRI Trinity/Artemis gimbal handle extension 1 x ARRI Trinity/Artemis knurled gimbal extension for low mode 1 x ARRI Trinity/Artemis post tool 1 x ARRI Trinity/Artemis docking bracket 1 x ARRI CSS stabilizer plate 2 x ARRI Trinity 18mm battery plate connection rods (to obtain the triangle formation) 1 x ARRI Trinity/Artemis post extension (gives you another 21 cm of extra post length) 1 x set of Trinity power cables (lower sled) 4 x Goldmount battery plates (the basic ARRI package includes only three, I'm throwing in one extra plate) 1 x cam power cable, Trinity > ARRI Alexa Mini, Mini LF, Amira 12V 1 x cam power cable, Trinity > ARRI Alexa, Alexa LF, etc. 12V/24V (2pin Fischer) 1 x cam power cable, Trinity > RED DSMC2 cameras (6pin Lemo) 12V 1 x cam power cable, Trinity > 4pin XLR 12V 1 x external power cable to power the Trinity head (d-tap > 4pin Lemo) 2 x Belden 60 cm BNC cables in bundle (they are set up to be used in a most efficient in combination with most camera packages in the head) 1 x Optical Support 3D printed Headlock (to lock the head in the tilt axis, this item is damaged but still usable and functional) 4 x Optical Support 3D printed bumpers (to protect the sides of the head base) 1 x Optical Support 3D printed wishbone (to lock or limit the roll axis) 1 x Lenovo tablet with Windows10 and USB cable to connect to the head through the FOMA software 1 x Peli Air Case 1615 with custom fit foam inlay for the Artemis post 1 x Peli Case 1780 with custom fit foam inlay to transport the Trinity Rig with minimum disassembling (custom design) Few other notes: The head itself will come in a custom fit foam inlay in a box, but without a case! You will need to buy that case (SKB 3i-2317-14BE). If the buyer wishes, I can put the whole rig into the Peli Case 1780, but shipping might become very costly like this and I wouldn't recommend shipping the Trinity as assembled as it would be. The stand visible in the pictures is not included in the package. Sale within the EU will be preferred!! Buyer pays money transaction fees and shipping fees. Price: 38000 € EUR (plus taxes if you're based in Germany) For further questions and details shoot me a message. Cheers
  8. Sorry, I realized there is a mistake in the posted text. The 1.5" post clamp is, as pictured, of course included. I meant the clamp adaptor ring will not be included, when you would want to use it on a smaller than 1.5" post. Apologies for the confusion. Cheers Ozzy
  9. Hi I'm selling my Artemis monitor bracket, which I was using on my Artemis Cine Broadcast Rig before. I've sold the sled two years ago and kept the monitor bracket as a backup, but figured now there is no point in keeping it. I was using the bracket with a Transvideo 6 inch x-sbl monitor, so you will be able to use it only with that monitor or monitors built identical. Please note, that the 1.5 inch post clamp is NOT included! The bracket has some scratches and signs of usage (see pics attached), but is functioning without flawlessly. The bracket is located in Berlin/Germany, so a sale within the EU would be preferred. Buyer pays shipping and money transfer fees. Price I'm asking is 1000 € EUR Cheers
  10. I also own an ArmX1. It‘s been many years that I have tested the G50x and I remember that I liked it, it‘s a good arm for sure. But, for many reasons I would go with the ArmX1, it‘s an amazingly smooth arm, very easy to handle and weighs nothing. On top, I love the mindset of Smartsystem as a company in terms of customer relations. You can always get a hold of them, they‘re very responsive and try to help as quick as possible. So yeah definitely worth its money. Cheers
×
×
  • Create New...