Stuart Penny

Sled is SOLD Price Drop KS-8 to $850.00. Bartech to $1000.00

BUMP OK, time to make this gear move. I'm breaking it out and lowering prices. GPI Pro I HD sled with XCS gimbal, all cables, mount brackets, monitor and case. = $8,000.00 Bartech Follow focus with extra M1 motor = 1,500.00 KS-8 Gyro = 1,500.00 Buyers pay shipping/insurance.

BUMP - Price Drop to $15,000.00

Selling my GPI Pro 1 HD sled with XCS gimbal and GenIV battery rack. Included are many cables, brackets, Bartech follow focus and KS-8 gyro. Sorry but I am keeping my arm and vest. I’m selling because I upgraded to an M2. I would like to sell this as a complete package and have priced it accordingly. For 2-3 weeks I will not break anything out. Buyer pays shipping and insurance or local pickup. I am in Santa Fe, New Mexico. PayPal only. $17,500.00 US GPI Pro 1 - HD Conversion with Gen IV battery rack a) 2X - 12"- 15mm rods blk. b) 2x - Mounting brackets. 1X - SmallHD 702 monitor 1X - Custom configured monitor mount 2X - 7" dovetail plates 1X - 9" dovetail plate 1X - XCS Gimbal Tool Spare Fuses for Pro Sled Spare O rings for XCS gimbal Signal Pads - 2X 6DB and 1X 3DB 1X - Pelican case Disclosures: a) The fore/aft knob has been bent slightly. It works just fine but is stiff. b) HD conversion and bottom stage done by David at Cramped Attic c) I've always used the SmallHD monitor with LP6 batteries(not included) for the weight but I will include 2X LPS to Dtap cables in case that is prefered power source. Cables 1 16" HDSDI monitor cable 1 Pro > monitor(long for superpost) 1 Pro > AB Dtap Breakout box 1 Pro > BOXX transmitter 1 PFD reciever to Arri 435/535/Arricam/Moviecam Run/Stop 1 Pro > Marchall Monitor 1 REDEpic Dragon power 1 Arriflex/Amira/Alexa mini power 2 Panaflex Power 2 XLR Power right angle (check before using) 1 Panavision alteranative power (all) 2 4PIN XLR power rght angle (check before using) 1 BFD reciever to EFP/IIIA/Pro power cable 1 Arri/Alexa power right angle 2 Arri 535/Alexa power straight 2 3PIN XLR straght (check before using) 1 Preston MDR power 1 Modulus 3000 Bartech 1 M-One motor w/ 5 gears 1 Heden M26VE motor w/ 4 gears 1 Transmitter/motor control 1 Hand held focus devise 2 attenas 4 extra attenas 2 Motor control lemo cables 1 BDF Dtap power cable 2 Motor mounts 1 pelican case Gyro Stabilizer 1 KS-8 stabilizer 1 12V Inverter on/off switch 1 12V car socket charger 1 12V AC battery charger 1 12V FAS1075 battery w/ case (practically new) 1 Battery to XLR cable 1 extra fuses and mounting screw 1 Pelican case 941715356_GPIPRO.MOV

Selling three CP2 Zeiss lenses. These lenses are in mint condition with no scratches, barrel marks, or blemishes of any kind. 100mm - T/2.1. - 2,000.00 28mm - T/2.1 - 1,800.00 15mm - T/2.9 - 2,000.00 5,000.00 for all three.

Super Post is SOLD.

Selling a few things. 10 Chocolate bar batteries, rack, case, 2chargers = 300.00 plus shipping 12 Anton Bauer Proformer 3 NiCad 30WH and charger = 300.00 plus shipping 1 GPI Super Post(SD) with gimbal and Donkey Box(no plates) Case included = 600.00 plus shipping 2 Anton Bauer Chargers - 2 quads = 600.00 plus shipping I am located in Santa Fe, New Mexico. All batteries are in decent shape. Have been used but still hold good charge and had no issues last time out.

I would take it if the other direction doesn't happen....thanks, s

PM's

Did you sell this or do you still have it?

UPDATE: The TB-6 and Decimater have been SOLD. Someone make me an offer on the battery rack and batteries.

Update: I am no longer selling the sled. I decided to have it upgraded with new HD wiring and battery rack. I'm much happier as I really liked this rig.... Since this is the case, I will now be selling the following items: 1X - XCS TB-6 green screen monitor and cable (does not include mount) - $1000.00 1X - PRO 1 battery rack, 10 batteries, and two chargers - $800.00 1X - Decimator - $200.00 Open to offers and I am in need of an 8" yoke monitor mount and Anton Bauer batteries if anyone would like to make a trade.

Selling my sled system. Great unit complete and ready to work. Complete System Purchase - $13,500.00 U.S. 1. 1X PRO camera stabilizer (s/n 22.) Upgraded interchangeable center post. Comes with original custom Calzone case. 2. 1X Pro D-Box (s/n 149) 3. 1X XCS Ergo gimbal. 4. 10X original PRO batteries with 4 PAG Micrometer chargers and original custom Calzone Case. 5. 1 XCS TB-6 high intensity daylight viewable monitor, with PRO bracket. 6. 1X PRO Superpose with IIIA gimbal and original Pro donkey Box. Comes with custom Clydesdale case. 7. 1X Jerry Hill Gorelock docking bracket. 8. 1X PRO monitor bracket. 9. 2X Preston brackets for attaching MDR to sled. 10. 1X Recordermount for sled. 11. 2X 7" Camera plates with 2 6" rods. 12. 1X 9" Camera plate. 13. 14 Cables: 2X Pro power to Preston MDR. 1X PRO power to BOXX HD transmitter, 2X PRO power to straight Arri 535/435/Allexa, 1X PRO power to right angle Arri 535/435/Allexa, 2X lightweight BNC, 2X PRO power to Panaflex, 3X straight XLR to PRO power, 4X right angle XLR to Pro power, 1X PRO power to Panavision ALT, 2X PRO monitor cables 44" for super post and 31" for regular use. 14. 1X Decimator Box for HD to SD conversion. 15. 1X Marshall Monitor (back up unit to XCS monitor with exposure tools).

SOLD

BUMP

Price is $7,500.00

Selling my rig. A little sad to see it go, but recently upgraded and don’t really need two right now. It’s been very good to me. The gimbal was serviced and calibrated by Tiffen last fall. Kit includes the following. Case Sled and low mode f-bracket 3x V-mount batteries and charger AC7 Monitor, hood, and AC power cable Arm and Vest Weights, docking bracket, Custom grip (mounts over existing grip) Lemo – RED Epic power Lemo – Teradek Bolt power Lemo – Bartech FF power Lemo – Redrock Breakout box power Lemo – Odyssey 7Q power (at lower stage) Lemo – XLR power (at lower stage) **all lemo cables made by Terry West I am located in Santa Fe, New Mexico....buyer covers shipping.

Looking for a socket block if anyone has one they can part with. Thanks.

SOLD

Still available

Bump

I purchased this kit here on the forum from another member a few weeks ago. Everything arrived fine and in perfect condition but due to a personal life issue, I now need to re-sell it in order to pay for said life issue. I've had it about a month and only set it up a couple of times to practice. Everything works fine and I have experienced no issues. Included in the sale (everything in the pictures except monitor, battery and c-stand). - Proline Raven Sled - capable of flying up to an Alexa. - Proline Vest (modified with M2 buckles http://www.ratchetingbuckles.com/for more precise fitting) - Proline Arm with 2 sets of springs for flying everything from DSLR up to fully loaded Alexa. - Custom cut hard case from http://www.mycasebuilder.com/ - Original fasteners from the vest that I took off to change the buckles Cables: - Red Epic Lemo to Sled Lemo power cable - Monitor XLR to sled Lemo power cable - Redrock Microremote base station to sled Lemo power cable Supports 12v and 24v Lemo power with up to 3 batteries Dual SDI cables in center column Extra: I will also include a second dovetail plate and 9" post. 5,000.00 (will not sell items separately at this time)

My approach is a little more limiting in how low I go but it keeps me operating in good posture and solid control over the rig. I only move the gimbal enough to make sure I can get my hand under it. This keeps the cg closer to where I'm operating, thus more control. I do use a f-bracket to get lower and as long as I know the shot and have the yoke handle in the right position, there is never an issue with strong tilts or switching across the body. Additionally, if I know I'm going to low mode for any part of the shoot that day, I'll add my 2nd monitor under the camera. This allows me to switch to low mode in 5 to 10 seconds with little or no re-balancing. I use a lightweight AC7 for the second monitor. This also allows me to operate in the same eye line and I can see where Im walking much easier than having to look up at a monitor... If and when I need to get really low for a shot, I'll break some of those rules but I'm short, so I rarely have to....lol

That was Awesome! Thanks for sharing....

I think there is always a benefit from warming up your muscles regularly and staying stretched out. Even if you don't operate a steadicam. The guys that don't do anything won't know the benefits they could be getting out of some very simple and less than 15 minute warm ups every day in life. No matter what you do, keep it simple but do something. I only stretch on operating days, but on all other practice days, I warm up exercise and stretch for 15 minutes before putting on the vest. Make a huge difference!