-
Posts
18 -
Joined
-
Last visited
-
Days Won
1
Everything posted by Nick Muller
-
Selling pro gimbal + long handle and telescoping Center post. Both are latest gen and recently serviced (last month). Price New is $9792 + tax/shipping Price is firm. Will split up: Gimbal 5500 Centerpost 2500 DM me or email me at nickmullercine@gmail.com Unfortunately only have rig photos to show as Im on the go but contact me and Ill have pictures of the parts separated shortly.
-
Asking $2100 In good condition, has an upgraded dbiii MDR diving board. Dm me or email me at NickMullerCine@Gmail.com.
-
- Pro
- donkey box
-
(and 2 more)
Tagged with:
-
-
Putting the feelers out there. This arm has treated me very well and is in very good condition. The arm used to belong to Scott Sakamoto, his name is engraved in the arm and I will include custom Magnesium parts that were given to me that are lightweight and will ensure a long life in case you want to switch out hinges and rotate annually etc. Robert Luna serviced it about two years ago, the pin has been shaved so that it fits Pro and Tiffen Socket blocks. Comes with an arm bag, cover sleeves and a 6in arm post. Asking $5000 USD obo
-
Anton/Bauer DIONIC HC's (BStock) - $200 each
Nick Muller replied to pauldudeck's topic in Steadicam Marketplace - For Sale
Killer deal. -
Loaded Analog Bartech (M-One motor)
Nick Muller replied to Nick Muller's topic in Steadicam Marketplace - For Sale
Bump. Price reduced to 2750 -
Loaded Analog Bartech (M-One motor)
Nick Muller replied to Nick Muller's topic in Steadicam Marketplace - For Sale
Bump. Still available. -
Loaded Analog Bartech (M-One motor)
Nick Muller replied to Nick Muller's topic in Steadicam Marketplace - For Sale
. -
M-one motor (recently serviced) Lots of cables including: -Pro power -Aaton power -dtap> power -2pin>2pin -Back up antennas for motor driver and hand unit -Marking rings & 15mm>19mm step up rings -Motor gear pitch wheels and backup motor 5pin>5pin cables Motor Driver has a Pro DB bracket receiver so you can slide it onto your diving board if you're sporting a DB. Comes in a peli with a backup 9v and a really useful motor bracket that sticks motor out further and gives more mounting options. *things to note*: (HU battery wire/spring was stretched recently on a show when switching batteries it stuck to the battery upon removal, works fine you just have to push the battery more than usual to slide the door closed on the HU because the spring isn't fully compressed.) $2,900 Located in LA.
-
Checking here before going new.. If anyone has a spare they're willing to part away with please PM me.
-
Ken-Lab KS-4 Gyro Kit
Nick Muller replied to Nathan J Conant's topic in Steadicam Marketplace - For Sale
I've personally used this gyro, and can confirm It is in pristine condition, and surprisingly quiet. -
Gorelock 1.5" Docking Ring
Nick Muller replied to Nick Muller's topic in Steadicam Marketplace - For Sale
SOLD -
Free 3d Printable wrap grip designs
Nick Muller replied to Tim Sutherland's topic in Brackets/Widgets
Printing the 2in today in black.. Thanks Tim! -
-
Transvideo HD6 Classic (Blue-knob)
Nick Muller replied to Nick Muller's topic in Steadicam Marketplace - For Sale
SOLD -
Transvideo HD6 Classic (Blue-knob)
Nick Muller replied to Nick Muller's topic in Steadicam Marketplace - For Sale
*Sale Pending* -
Got it back from Transvideo 3 weeks ago, got a new board installed, horizon sensor (avenger leveler) and latest firmware/software etc for this series. Glass is clean no knicks or scratches. Asking $2600 + shipping from PA. I'll also be in LA 9/3-9/11 if anyone wants to take a look at it or do local pickup. Comes with: - Fitted Peli & Transport bag - 18" HDSDI - 4pin XLR to D-tap - Noga Arm (not pictured) - Sun Shades
-
Anyone have one they are willing to part with? No need for a cable just the centerpost.
-
- pro
- centerpost
-
(and 1 more)
Tagged with:
-
LA Machinist recommendation - Arm post modifications.
Nick Muller replied to Damian Church's topic in General Discussion
I'd hit up Rob Luna -
You can put a strip of gaff around the rod where the motor should be and try clamping over that. Kinda ghetto but it's worked in a pinch.
-
Hill docking bracket 1.5" and PRO stuff
Nick Muller posted a topic in Steadicam Marketplace - Wanted
Was going to buy new, but if anyone has extras and wants to sell, I'll gladly take off your hands.. Looking for: -Hill Docking Bracket and rings for 1.5" post -PRO gimbal w/ long handle -jumper blocks! (any/all) Shoot me a PM if you're interested in selling -Nick-
- Hill
- docking bracket
-
(and 2 more)
Tagged with:
-
Did you try Robert Luna?
-
Seriously dude... You must be trolling us.
-
Hey all, Looking for a used pdl. Pm me prices/info Best, -Nick
-
You can purchase it in the upgrade tab, or here: http://www.steadicamforum.com/index.php?app=subscriptions