Jump to content

David Stevens

Site Sponsor
  • Posts

    23
  • Joined

  • Last visited

Everything posted by David Stevens

  1. Professional Vehicle mount with standard Mitchell base, Bridge plate detaches and can be mounted on standard speed rail via U-bolts. You can attach small or standard socket blocks. The vehicle mount is compatible with Steadicam, Glidecam or other industry standard professional stabilizer arms that connect to vest socket blocks. $349.00
  2. Demo price $6,900.00, MSRP on new was originally $16,990.00 The Glidecam Gold Series Sled has a 2" central post and incorporates sophisticated engineering and precision machining to make it lightweight and strong for cameras to 45 pounds. The Base of the Glidecam Gold Sled can handle 3+ Anton Bauer or V-Mount style batteries that delivers 12 volts to the base (for the monitor) and delivers either 12 or 24 volts (switchable) to the head for use with video or film cameras. The Base incorporates one BNC Video out connector, one 12/24 volt power switch, three circuit breakers and two 4-pin “Lemo” style OB304 video/12 volt power out connectors. The Glidecam Gold Sled monitor mounting bracket can be rotated 180 degrees, with no-tools adjustment so the monitor is viewable during low mode operation. The precision, x-y adjustable Head assembly utilizes low friction “Teflon” which is incorporated into its hard coat finish. The Head assembly’s back panel has a 3-pin “Lemo” 1B303 style with switchable 12/24 volt power, BNC video in, and a 2 pin “Lemo” 1B302 style with 12 volt out. The front panel has a 2-pin “Lemo” 1B302 style with 12 volt out, two 4-pin “Lemo”OB304 style with video/power out and one 4-pin “Lemo” OB304 video/power in connectors. The head also has a custom designed video distribution amp installed for clear video signals. The Head also incorporates a drop in style dovetail camera plate for quick front to back balance. Very, fine tuning, ergonomic knobs control front to back and side to side balance adjustments. The Sled’s “no-tools” precision Gimbal is made to top of the line quality. The Gimbal incorporates 4 bearings inside the handle to yoke connection (the tilt axis). There are 2 bearings on each side of the yoke, providing 4 bearings for the roll axis. There are 2 central main bearings for the pan axis. This doubles the Gimbal’s thrust capacity and creates less than a .0002” deflection off true center. All Gimbal parts are machined within .0005” accuracy and are hard coat black. A very tight knurling has been machined onto the Gimbal Tube to improve handling. An easy to replace soft foam covers the handle grip. The Sled has a “no-tools” Telescoping Center Post. The top and bottom of the Post both have “no-tools”, 90-degree rotation, quick release connectors (bayonet style). This allows the Head and the Base of the Sled to be removed quickly. The custom, shielded, wire coil assembly inside the post has 8-pin “Lemo” style connectors on both ends for quick disconnect. The Center Post also incorporates an alignment pin as part of the “no-tools” clamp that controls the extension of the Telescoping Post. This pin keeps the upper and lower posts in alignment so the Head and Base of the Gold Sled are always parallel to each other.
  3. Like new demo unit for $950.00, list price $1495.00 The Glidecam X-20 sled holds cameras weighing up to 20 pounds. The X-20 Sled incorporates sophisticated engineering and precision machining to make it lightweight and strong. The gimbal handle fits and arm with the standard 5/8" arm post. The precision, x-y adjustable Head assembly incorporates a drop in style dovetail camera plate for quick front to back balance. Very, fine tuning, ergonomic knobs control front to back and side to side balance adjustments. The Sled’s “no-tools” precision Gimbal is made to top of the line quality. The Gimbal incorporates 4 bearings inside the handle to yoke connection (the tilt axis). There are 2 bearings on each side of the yoke, providing 4 bearings for the roll axis. A very tight knurling has been machined onto the Gimbal Tube to improve handling. The Glidecam X-20 Sled has a strong and rigid 1.25” central post, and a “no-tools” Telescoping Post. This allows you to easily adjust the sleds central post length .You can install your own monitor and a Anton Bauer or IDX V-Mount battery plate if desired to the Glidecam X-20 base platform. Another options is to add counter weights and use your camera monitor. .
  4. Great condition just used at a trade show for 20 hours a few years ago and was in storage, you will need new battery $1,700.00 or best
  5. Glidecam X45 sled sale at only $4495.00, two at this price, one Anton Bauer and one V-Mount email sales@glidecam.com
  6. We just added one like new X20 trade show demo to stock for only $3200.00, email sales@glidecam.com for more info
  7. 30 Year Anniversary Sale. Glidecam Gold Sled sale, save $6,900.00, not only $9,995.00 https://glidecam.com/product/glidecam-gold-sled/
  8. Dear Matt, I wish Glidecam Industries could get one of the new Glidecam V-25 systems to you by Monday. The fact is that while we continue to ship units everyday the demand is so high on the new Glidecam V-25 that the current lead time for new orders is now about 60+ days. Best regards, David Stevens davids@glidecam.com
  9. The Glidecam V-25 system will handle cameras up to 25 lbs and is HD ready when you are. David
  10. The Glidecam Gold rig at Alan Gordon Enterprises has been there for a few years now as a demo/rental unit. It was one of the first ten arm socket pin blocks made to fit the Glidecam Gold Vest. The newer version out for the past two + years has an updated pin and has not been a problem fitting all other vests on the market past and present. Best regards, David P. Stevens davids@glidecam.com
×
×
  • Create New...