Dale Vance Jr.

I just realized that I failed to mention that the ergo handle on this sled is for a goofy operator.

I was able to fix the issue using some pieces I had for the cam-jam smallHD 703 bracket adaptor. Jerry, does your solution work with the mounting brackets from smallHD? my solution does not allow me to use the smallHD sunshade that attach via the smallHD bracket. I used the cam-jam bracket. I'd much rather use the original brackets if possible. Thank you .

adding a second Hill docking bracket to this package. it is the shorter one used for your cart, or a moses pole. not pictured. ALSO, price drop!!! 25K

Hi there, I was wondering if anybody was using this combination, OR if your using the Tiffen Monitor Bracket with another monitor....... I just started this setup, and I am having issues with the tightness/friction of adjusting the monitor. If I tighten the 1/4 20 to make it "firm" it either tightens on itself and binds, or becomes totally loose causing the monitor to not hold its tilt angle. I've contacted tiffen about this, and they are looking into it. Was wondering if anyone else has had this issue..... if so, did you find a solution? I currently have the nylon washer supplied by tiffen between the monitor and the bracket, and only the metal bolt attaching it from the outside of the bracket. Thanks in advance for any advice.

Hi there, I was wondering if anybody was using this combination, OR if your using the Tiffen Monitor Bracket with another monitor....... I just started this setup, and I am having issues with the tightness/friction of adjusting the monitor. If I tighten the 1/4 20 to make it "firm" it either tightens on itself and binds, or becomes totally loose causing the monitor to not hold its tilt angle. I've contacted tiffen about this, and they are looking into it. Was wondering if anyone else has had this issue..... if so, did you find a solution? I currently have the nylon washer supplied by tiffen between the monitor and the bracket, and only the metal bolt attaching it from the outside of the bracket. Thanks in advance for any advice.

This item is being removed. Thank you for any previous inquiries. Dale

XCS Ultimate2 HD w/ Basic HD PDL U2HD lower electronics and U2HD upper camera platform. 2" carbon fiber post 18"-30" telescoping. Ultimate Gimbal gimbal tool Boland BVB07 monitor sunshade Cam-Jam Monitor Bracket XCS Camera Plate XCS MDR 1/2 Bracket Tiffen docking bracket w/ Hill yoke 2 rings for mounting on Hill yoke (2) monitor power cables (8) assorted power cables (epic, alexa, amira, panavision dxl, maybe 12v tilta cage?) Hard case for shipping $27,000 buyer pays shipping bank transfer accepted Dale Vance Jr Los Angeles, CA 323-251-8284 purchased new in 2017

Wave1 with two plates and three power cables for sale. Excellent condition. $6000 usd buyer pays shipping. Cash, bank wire transfer, zelle accepted Located in Los Angeles, CA 323-251-8284

SOLD.

New prices $400

New price $1900

SOLD

This wall bracket is the perfect landing spot on the camera truck for your sled. It fits 1.5 inch post. $500 Buyer pays shipping. No international. 323-251-8284 Dale Vance Jr. Item is located in Los Angeles

SOLD.

$2200 44 lb capacity. excellant condition. This rig currently sells for $3500 on B&H located in los angeles. buyer pays shipping. no international. Dale Vance Jr. 323-251-8284

In excellent condition. Used as an onboard recorder for one movie, otherwise been sitting in a case. Comes with 512GB solid state drive. This is the model prior to the Blade. $300 buyer pays shipping. No international.

Rickshaw for sale. Three sets of wheels including beach wheels. Can be attached to vehicle via Reese Hitch. Uses and standard speedrail. 2 six feet speedrail included. Los Angeles area only. Will not ship. Buyer must pick up. $1000 Dale Vance Jr. 323-251-8284 Los Angeles, CA

This item has sold. Thank you.

Monitor comes with yoke. No rods or post mounting bracket included. There is a plate on the monitor that allows for a gold mount battery to be attached. Screen is in good condition with only minor blemishes. I believe it is an Evolution I version monitor. http://www.transvideo.eu/CineMonitorHD-Classic/Overview its pretty much the same as this as far as i can tell. $2400 Cashier bank check only buyer pays shipping located in los angeles, CA 323-251-8282 eyewonder@mindspring.com

Is this item still for sale? Where are you based out of?

Sold.

GPI PRO Sled for Sale Betz Topstage ($3902 new inc. VAT) Upper HD Electronics Gen II ($2780 new, gen III) PRO Telescoping Post ($3150 new) Lower HD Electronics Gen II ($2920 new, gen III) PRO Gen III Battery Rack AB ($5000 new) PRO VZ Gimbal & Grip w/ XCS Extended Handle ($3800 + $2455 new) Center Post Cable ($665 new) PRO Telescoping Monitor Arm W/ Yoke Mount & Arm Post Clamp ($1200 + $420 new) Jumper Blocks x 3 ($160 each new) PRO Recorder Mount ($350 new) Cinematic Precision Camera Plate ($475 new) Transvideo CineMonitor HD Evolution Superbright W/ Virtual Horizon ($3900 new) Hill Docking Bracket W/ two DR2-2.00” rings ($900 + $85x2 new) Over 20 assorted power cables Alexa, Red, Sony, Panavision, Arri etc. (Easily $2000+ in value) Wall Mount for your truck, shop, garage (estimated value new $800) Fiberglass Hard Case (estimated value new $500) Docking Bracket for 1.5” Post (estimated value new $500) Low Mode J-Bracket ($200 new) $36,567 NEW PRE-TAX Asking $22,000 Cash or Bank Transfer ONLY Based in Los Angeles Buyer Pays shipping and all fees 323-251-8284 eyewonder@mindspring.com

GPI PRO Sled for Sale Betz Topstage ($3902 new inc. VAT) Upper HD Electronics Gen II ($2780 new, gen III) PRO Telescoping Post ($3150 new) Lower HD Electronics Gen II ($2920 new, gen III) PRO Gen III Battery Rack AB ($5000 new) PRO VZ Gimbal & Grip w/ XCS Extended Handle ($3800 + $2455 new) Center Post Cable ($665 new) PRO Telescoping Monitor Arm W/ Yoke Mount & Arm Post Clamp ($1200 + $420 new) Jumper Blocks x 3 ($160 each new) PRO Recorder Mount ($350 new) Cinematic Precision Camera Plate ($475 new) Transvideo CineMonitor HD Evolution Superbright W/ Virtual Horizon ($3900 new) Hill Docking Bracket W/ two DR2-2.00” rings ($900 + $85x2 new) Over 20 assorted power cables Alexa, Red, Sony, Panavision, Arri etc. (Easily $2000+ in value) Wall Mount for your truck, shop, garage (estimated value new $800) Fiberglass Hard Case (estimated value new $500) Docking Bracket for 1.5” Post (estimated value new $500) Low Mode J-Bracket ($200 new) $36,567 NEW PRE-TAX $22,000 buyer pays shipping bank check, cash, or money transfer only please email me directly, and not thru the forum eyewonder@mindspring.com 323-251-8284 dale vance jr

sold.

this item has sold.