Jump to content

Jared Deer

Premium Members
  • Posts

    45
  • Joined

  • Last visited

Everything posted by Jared Deer

  1. Hey Simeon, Currently have a pending sale - if it falls through and no other (full kit) buyer comes forward I will notify you.
  2. Price drop to $5,400 Eliminating price of Wave Rider in kit since this component isn't widely used compared to the blue riser plates. The wave rider will still be in the kit, so its essentially a free addition.
  3. Since I am not including the Betz Tools Dovetail Plate (which is needed to clip into the wave's platform) I am dropping it to $5,700 to take into consideration the purchaser's need to separately buy a plate from Betz.
  4. Greetings operators, I am selling my Betz Tools Wave as I have recently changed to an Arri Artemis 2 sled and Volt combo. This device has worked beautifully and had 0 issues since I purchased it. Below is an itemized list of all contents for this kit and photos attached. I am seeking $5,700 (originally $6,000) OBO for everything - this takes into consideration MSRP and discounted based on usage, wear and tear, age, and secondhand ownership. MSRP would be $8,500 if purchased new. I will split shipping 50/50 domestically. International purchasers will need to cover 75% or more based on distance and overall cost. Itemized List: 1 x Betz Tools Wave1 1 x Betz Tools Waverider 1 x XCS Stubby Plate 2 x Blue Riser Plates w/ screws (100% recommend and suggest this for use with the Wave to achieve neutral balance) 1 x Pwr Cable to D Tap 1 x Pwr Cable to 3 pin 0B lemo (GPI Pro) 1 x Pwr Cable to 4 pin 0B lemo (Artemis 2) 1 x SD / micro SD card for firmware updates 1 x Case with cut foam for Betz Wave + Wave Rider, Cables Please feel free to reply or DM me for further questions! Kind regards, Jared
  5. Hello ops! I am selling my trusty GPI Pro Cine Live sled - I recently upgraded to an Artemis 2 / Trinity 2 system. This kit includes the Sled, high mode monitor, power cables, multiple dovetail plates, SOS plates, rain covers, sunhood, and so on. Below is an itemized breakdown of everything included. Photos attached (stand and hill docking bracket not included) If you wish to purchase everything listed, I am looking for $26,750 (this takes in to account MSRP with discount for use, wear and tear, age and second hand ownership) OBO. The MSRP of everything listed would have been $36,580. I am open to splitting some of the listed gear (extra camera power cables, dovetail plates) except for anything that would prevent the sled from being operational on its own. I will split cost on shipping 50/50 (domestically). International shipping purchasers will need to cover at least 75% of shipping. Additionally, I am selling a Betz Tools Wave1 that I used alongside the GPI Pro Cine Live sled. If you are interested in purchasing both this kit and the Betz Wave, I will provide further discounts for bundling them together. Itemized List: 1 x Center Post telescoping 1 x Betz Top Stage (w/ 3x 15mm rods for low mode monitor or other AKS) 1 x Pro Gimbal 1 x Gen. 3 Battery Rack (AB) 1 x Upper Junction Box 1 x Lower Junction Box 1 x Center Post Cable 1 x Transvideo HD8 Cinemonitor 3 x Jumper Blocks (different battery configuration) 2 x Hill Docking Clamps 1 x Betz Long Dovetail Plate 1 x Betz Mounting Set for Alexa 2 x Betz Tripodlok Plates (SOS plates) 1 x Apex Cinema Alexa 35 Dovetail Plate 1 x XCS LT3 Dovetail Plate 1 x Arri Alexa Mini LF Dovetail Plate 1 x Rencher Industries Intersex Plate 1 x Block Battery V Mount Plate 1 x Pro Low Mode Grip (rare item) 1 x Gen 3. Battery Rack Rain/Dust Cover 1 x Transvideo Monitor Rain/Dust Cover 1 x Sun Hood for Transvideo HD8 Cinemonitor 1 x Cam Jam Quattro Monitor Mount 1 x Apex Cinema 24v power cable 1 x SJS 24v panavision cable (1S-2 pin) 1 x SJS 12v panavision cable (2b-4 pin) 1 x 2 pin Fischer power cable (Alexa, Arri Film cameras) 2 x 4 pin XLR power cables (for use on intersex and BB v mount plates) 2 x 2 pin 0b lemo to 3 pin 0b lemo (powers smallhd, teradek, and other devices thru upper and lower JBs) 4 x Monitor Power Cables for Transvideo HD8 Cinemonitor (varying lengths) 1 x Pelican 1650 case 1 x Innerspace cut foam 1 x Gimbal Tool 1 x Collar Tool Please reply or DM me for any additional questions! Kind regards, Jared
  6. Hi all, Selling my NODO Inertia Wheels. They have only been on set once, practiced with a dozen times or so, otherwise just been sitting in their case on my shelf all year. They're essentially NEW, almost completely unused. If you have any questions, feel free to ask on here or in DMs. Soon, I will upload additional photos of the case + cables + aks that aren't shown. Asking for $9000 (brand new before tax would be $9365) for everything, if you don't need/want batteries + charging hub, I will mark off $500 and sell at $8500 List of contents below: NODO Inertia Wheels (3-Axis) (NOT Max wheels) 2.4 ghz and 900 mhz antennas Cables (Ronin, D Bus, freefly Com, D Tap power, 30v AC-DC power supply) Wireless Receiver Foam Insert SKB 2011-8 Case TB50 Battery Adapter 3 pin XLR Block Battery Cable 2 x TB50 Batteries DJI Charging Hub
  7. Bump Price drop to $23,000 OBO Same as before, will drop $500 off either scenario for cables or ipod & other AKS.
  8. Bump. Price drop to $24,000 OBO Will take off an additional $500 if you need to source different power cables Another $500 off if you don't need the iPod and non essential accessories.
  9. (Apologies for black background, not sure how to get rid of it) For sale, Asking for $25,000 or best offer. Retails for $30,750 (assuming supply chain issues and inflation haven't increased it) not including additional accessories and iPod I'm parting with my Omega AR. Purchased in January 2020, it hasn't seen that much action honestly. Its maybe gone out on jobs half a dozen-dozen times a year. I have a video of it on the last job it was on to show its still in full operating function. Disregard the words on the cable photo, the cables are in good working order - this was sent to another operator who was interested in purchasing it. I was only labeling those cables as ones he would need to have crafted for a different sled system. Cables are built for Pro Cine Live Sled so the polarity IS different so please be aware of that. If you have a different system and have to purchase different cables for it, I will take off $500 the sale price to cover your loss. I have a video of the iPod on phone mount/super clamp + receiver and Omega AR in operation that I can send. Please DM for it (marketplace won't let me post video with sale post) List of contents: MK-V Omega AR Roll Cage MK-V Stabilized Monitor Arm + Yoke (originally designed to work with 2" posts) Delrin Inserts for Post reduction (works with GPI Pro Cine Live Sled 1.5" post) 3 pin 1B Lemo to 3 pin 2B Lemo Power Cable for Omega AR (Pro Cine Live Polarity Configuration) 8 pin 1B Lemo to BNC (Roll Cage to Monitor arm signal) 8 pin 1B lemo to 3 pin 2B Lemo (Pro Cine Live Polarity Configuration) & BNC for Monitor Arm Power + Signal Pelican Storm Case Yoke mounts for SmallHD 703 and Transvideo Cinemonitor HD8 SBL Evolution Cable Ring Mount Fob Super clamp with 5/8" receiver stud (for iPod/iPhone operating) Smallrig Clamp with 1/4 20" thread for phone mounting to anything really 3/8" thread to 5/8" receiver for phone mount Phone mount with 1/4 20" and 3/8" mounting 6' & 10' 3 pin 1B Lemo to 3 pin XLR for powering Omega AR to VCLX/Block Battery for tripod/dolly operating 2 mesh zipper bags to hold AKS + cables video-1659917945.mp4
  10. For sale Price: $3750 or best offer Items included: - Kenyon Labs 6x6 Gyro - 14v KL Inverter - Rencher Industries Intersex Plate - 4 pin XLR to D tap Was purchased in January 2019, I'm the second owner. Rarely used (only one day last year, not used once this year). I had the gyro rebuilt in February 2019 by Kenyon labs after I received it from previous owner. Toroid in inverter was changed from 12 volt to 14 volt. I have receipt for the rebuild from KL if purchaser wishes to have it for records. Only scuffs on it are cosmetic scratches on the anodized shell (pictured). I have a video of turning it on so you can see the inverter powering on and the gyro ramping up. If you wish to see the video please DM me and I will send it to you. No case. Will purchase shipping container and padding myself. Will split shipping with purchaser.
×
×
  • Create New...