Simeon Geyer

SOLD

SOLD

I wear a 32 for jeans 🙂

Heya, Sadly I’m leaving Steadicam behind and so my lovely sled is going on the market. Detailed pictures of everything in the link below. https://drive.google.com/drive/folders/1PSBv0CX6BkEzCAEdlrj9SgwFS7cTV5eS Looking for £16000 (+VAT for UK buyers) but open to reasonable offers or can split off some accessories if it’s slightly out of your budget GPI PRO Gen2 (upgraded to HD by Betz Tools) Telescoping Centerpost II Donkeybox III Upper J-box, Lower J-Box (HD Upgrade done by Betz in Germany - now the same as Cinema HD electronics) Pro Gimbal with VZ Grip Cam Jam Quattro Monitor Mount 3 jumper blocks Battery Rain cover 3x Pro Plates 1x Betz Alexa Plate GPI PRO SUPERPOST II (upgraded to HD by Betz-Tools) MONITORS Transvideo 6" CineMonitor HD SBL+ Video Monitor w/ virtual horizon Redbyte Decimator HD/SD downconverter CASES Custom cases (see pictures) ACCESSORIES Hill Docking Bracket Jerry Hill Arri 435 Lowmode Bracket LMB with 15mm Rod and Pouch Jerry Hill Arri SR-3 with IVS LMB Jerry Hill Arri SR-3 Iris Mount Vehicle Hard Mount CABLES 2x Arri 435 Cable 2x Arri III Cable 2x Panavision Platinum, G, Millennium Cable 2x Panavision Millennium XL, LW Cable 2x Moviecam Cable

Hey guys, as I’m leaving Steadicam behind I’m selling all my gear including my Wave 1. The wave is working perfectly fine, always made sure to balance the camera properly on it. Haven’t had it near salt water or rain. The link below has detailed pictures https://drive.google.com/drive/folders/15JFOPayEAXqkynoD-kzMR5Z3GmLJkikx Aiming for £4000 (+VAT for UK buyers) but Opern to reasonable offers Comes with 1x MKV power cable 1x XLR power cable 1x Betz Plate Short Hard case

Heya, as I’m leaving Steadicam behind due to changing life circumstances I’m selling my whole setup including my Titan arm. It’s the old design but in great shape. Hasn’t seen much use only some discolouring due to age and some minor scratches here and there. See pictures in the link below for all details. I’m currently aiming to sell it with all 8 canisters (4 blue 4 black) rather than splitting it up. Comes in hard case with custom cut foam Rain covers 3 length arm posts Low mode bracket https://drive.google.com/drive/folders/1-5rUQnko-w5-R5VVMFR4to5iU9bTOpHm Hoping for £15000 (+VAT for UK buyers) but open to reasonable offers.

Heya, as I’m leaving Steadicam behind due to changing life circumstances I’m selling my whole setup. Part of that is my Klassen Flex Vest in great condition - looking for £3500 (+VAT for UK customers). It comes with a socket block for both goofy and regular as well as all the spare parts. I have both the soft bag as well as a hard case available for it. Full list of pictures in the link below: https://drive.google.com/drive/folders/11wQelQ5ZB4lDnNlZQpOJ2557yBpIfYTh I’m a 6’3 normal build - the Vest has the serial Number 93 and Klassen has the exact measurements on file if you want to contact them to double check. My current measurements are: Waist Width: 12” Waist Depth: 8” Back Height: 25” Hip Height: 13”

I take it you found one by now? I got one in the UK I can ship over.

I got an SR3 low mode bracket both for IVS and without IVS. If I'm not mistaken they also for on the SR2?!

Which model are you after? Got a gen2 with HD upgrade (pretty much a CinemaHD by now) that I might be selling towards the summer if my sled hasn’t sold as a whole by then

Telescopic or a super post? I got a super post to sell as well as my whole GPI Sled if that's of interest to you

Hey Nic, I got a GPI Pro rig I’m selling due to life circumstances. Lovely rig and sad to part with it but it’s solid and ready for a Volt upgrade. It’s located in London, UK where I live but my family is from Munich ;-) See my listing below:

Hey guys, Due to live circumstances I’m leaving steadicam behind and selling my kit. Preferably selling as a whole kit but open to discussing a split if I get buyers lined up - don’t want to sit on bits. Looking for £40k + VAT Whole kit is in great shape - feel free to reach out for questions. Not checking facebook that often, so send me an email for fast replies: Contact@simeongeyer.com I got a full list of pictures and all attached below but here is the short version: https://drive.google.com/drive/folders/1PSBv0CX6BkEzCAEdlrj9SgwFS7cTV5eS PRO Sled - DB 3 Top Stage - Gen2 Top electronics with HD upgrade done by Betz in Germany - Telescoping Post - Gimbal with VZ Grip - Cam Jam Quattro Monitor Mount - Transvideo HD6 SBL Monitor - Gen2 Lower Electronics with HD upgrade done by Betz in Germany - Gen2 Battery Rack (Gold Mount) - Hill Docking Bracket - Super Post with HD Upgrade done by Betz in Germany Bunch of camera plates, power cables, Alexa 35 plate, low mode brackets for SR3 and 435 and lots more GPI PRO Titan Arm with 8 canisters (4 blue, 4 black) Klassen Flex Vest - 6’3” tall normal build and fits well Betz Wave - Bets Plate - XLR Power Cable - MKV Power Cable American Stand Single Riser with 8” Wheels Baer-Bel Hard Mount Hard cases for everything (Soft bag for Arm and Vest also available)

I’d be interested in the XCS LT3 and one Betz Tripodlokplate in case you’re happy to split that off :) Best Simeon

Would you sell the tripod lock plate separately?

Hey Aaron, absolutely understand. Should it get “left behind” or no one picks it up, do let me know

Hey guys, anyone here selling an XCS LT2 or LT3? Preferably located in the UK (or Europe) but happy to hear from anyone everywhere :)

Heya, is the XCS LT3 still available?

Heya, would you consider selling the riser plates separately?

Heya, does the sliding plate for the Wave 1 and would you consider selling it separately?

Heya, I got a Churchill Monitor Mount that firs a 1.5” post if you’re interested. located in the Uk but happy to ship

Selling an GPI Pro Gen 3 Monitor (Green Screen) and Horizon Most likely not of much use nowadays but maybe someone feels nostalgic and or runs a museum? Still has the plague from the first owner on it. Open to offers (donations) Located in London, UK but happy to ship if buyer covers cost

Hey guys, upgraded my docking bracket so no longer need this. Located in London, UK but happy to ship if buyer covers cost. comes with one docking ring hoping for £200 but open to offers

Hey guys, got a Betz Churchill Monitor Mount for sale. In great shape, only small signs of use - had it as my backup but no longer needed. located in London, UK but happy to ship Open to offers

Heya, don’t have the full rig, but I got a Betz Churchill Monitor Mount if you’re interested