Tom Gleason

SOLD OUT!

Down to 2 of the 4" and 3 of the 6". Also scared up ONE 8".

Only 11 - 4" left. Only 4 - 6" left.

Down to 11 of the 4 inch and 9 of the 6 inch.

15mm to 15mm 2 3/4" Extended Offset. Black anodized aluminum with stainless steel screws. $25 Sometimes you need a little extra reach. SoCal locals can arrange pickup or I'll ship. Postage TBD depending on location. I'll accept cash or Paypal. Contact me at: cinewidgets@gmail.com

9 available. Black anodized aluminum. Screws included. $25 each. This plate mounts between the monitor and the mounting bracket, spreading out torque and reducing potential vibration. NOTE: Older mounting brackets may require minor modification. Please inquire for details. SoCal locals can arrange pickup (I'm near Studio City) or I'll ship. Postage TBD depending on location. I'll accept cash or PayPal. Contact me at: cinewidgets@gmail.com

15mm Black anodized Aluminum rods, 4" and 6" $5 each, either size. I have a limited number of these left. As of this posting I have 15 - 4 Inch and 11 - 6 inch left. Once they're gone, that it! If you're a SoCal local we can arrange pick-up (I'm near Studio City) otherwise I can mail them. Postage TBD depending on buyer location. I'll accept cash or PayPal. Contact me at: cinewidgets@gmail.com

Thanks for the input!

Open question to the Steadi-realm. Is anyone still using a TB-6 monitor on their rig? The reason I ask is I still have a number of my TB-6 Stabilizing plates and wasn't sure if I should even bother to post them for sale. Thanks!

SOLD OUT!

Sorry Gang! All sold out! Just don't know how to delete the post.

And still more Spring Cleaning. I have three of my popular Hill Docking stand Stabilizers left. These are designed for the older Hill Docking Brackets to keep them from wobbling when parking the rig. Also good for preventing those pesky AC's from spinning the Dock when it's locked down on the stand, preventing damage to the spud. Stainless steel with stainless steel screws. $50.00. Only 3 left! As before SoCal locals can arrange pick up or I'll ship. I'll accept cash or PayPal Contact me at: cinewidgets@gmail.com

The Spring Cleaning continues! 15mm Clip On Preston Motor Rods by Skipp's Engineering. Compatible with the Hill PAM brackets. Brand new and unused. $50.00. I have 2 left. SoCal locals can arrange pickup or I can ship. I accept cash or PayPal. Postage TBD depending on buyer location. Contact me at: cinewidgets@gmail.com

I'm now down to 4" and 6" rods only.

I am now out of the 12" rods. It still have a few 8" and a fair number of 4" and 6"

Try Twojay Dhillon: twojaydhillon@gmail.com. I gave him the CAD files and he was planning on doing a run of them last year.

It's Spring Clearance time. 15mm Black anodized 15mm Aluminum Utility Rods in assorted sizes. I have 4", 6", 8" and 12" in stock through some quantities are limited. $5.00 any size. If you're a SoCal local we can arrange a pickup otherwise I'm happy to ship. Contact me at: cinewidgets@gmail.com Get them now. Once I'm out, that's it!

Hey Gang: I did sell out of the last of my post holders. However, if anyone is interested I would be more than happy to forward a CAD file so that you can have a machinist make one. Or make it yourself if you're so inclined. Email me at: cinewidgets@gmail.com

Hey Gang: I've been off the radar for a while but am alive and well... Just super busy. (And recovering from a fractured pelvis.... But, that's a story for another time.) I've decided to have a sale to clear out some back stock. So, until supplies run out, I'm offering my popular Angled "D" Bracket for the low price of $120 (was $150). The 15 degree angle moves the sled away from the arm easing operation in low mode. Made for 5/8" (Pro style) armposts which are not included. Black anodized with stainless steel screws. We can arrange pick up if you're in the Los Angeles area or I can ship in the US for $5.95 via Priority Mail. I will ship internationally. Contact me for the shipping cost. Payment can be arranged through PayPal. Though I'm happy to take cash. Contact me at: cinewidgets@gmail.com Cheers! Tom G.

Hey Gang: Does anyone have contact information for the machinist Eric Peterson? Or know if he's even still in the business? I tried contacting A and S Precision, which I believe was his company but the number is disconnected. Thanks! TG

I'm pleased to announce I have made a new run of the 10 and 12 inch 15mm Utility Rods. Note that there is a small increase in the price of the longer rods due to increase materials cost. Black "hard" anodized aluminum. 10" and 12" - $15.00 USD 4", 6", 8" - $12.50 USD Email me at: tom@cinewidgets.com http://www.cinewidgets.com

Yeah, sorry guys. I had that problem of the missing pictures in the past. It's a browser compatibility issue with the program I built the pages with. I'm working to remedy it. In the mean time if anyone is interested in specific products I'm happy to email photos. Thanks for your patience. And yes, I'll be going to the Cinegear "After-Party" with my samples.

I am very pleased to announce that Cinewidgets is now carrying products from Skipp's Engineering! These great new items are a welcome addition to the Cinewidgets lineup and are a must have for any Steadicam owner's kit! They include, to name a few: The Clip-On Preston motor rod in 15mm and 5/8" sizes. The Skipp's Improved Preston motor rod Kit for the DM1, DM2 and DM1x motors Modular Canatrans bracket Two MDR brackets offering expanding mounting options. Arri 235 Utility Rod in 15mm and 5/8" sizes. CInetape Eyebrow Bracket For more detail and pictures, check them out at: http://www.cinewidgets.com Questions? Contact me at: tom@cinewidgets.com or call: 818-769-9370, 9:00 am to 6:00 pm PST

Hey Gang! I have trail permits for Mt. Whitney for June 11 through 14. So far the confirmed party is Matt Petrosky and I. That leaves two open spots. Looking for anyone serious about hiking to the summit of the highest peak in the Lower 48. (14,496 ft!) You know who you are! We're looking to spend 2-3 days up there. First night camping at the Whitney Portal and a couple nights on the trail. It's a hard hike, but do-able for anyone in reasonably good shape. Contact me at: tom@cinewidgets.com for more details. Come join us on the mountain! TG

Does anyone out there have or have access to a digital projector I could borrow for Wednesday & Thursday? I'm helping out an animal rescue non-profit for an open house and we need to set up a slide presentation. I will personally vouch for the safety and care of the projector and will return in at the earliest convenience. You'd be earning some karmic brownie points! Contact me at: Tom Gleason (818)-769-9370 or by email at: tom@cinewidgets.com Thanks!