Jump to content

Frank Schwaiger

Members
  • Posts

    27
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Frank Schwaiger

  1. Hi zhouzhenggang, that's an easy solution, a wireless PDMOVIE Live Air 3? Does it come with other gears than 0.8? And on which wirless band the sigmals are transmitted?
  2. Hi Mark, Tom's question was if you are balancing the camera in the vertical axis. You just confirmed the other two axis. If you are not balancing the camera vertically this may lead to issues with the wave's behaviour. So you have to take care about the height of the CG of the camera as well. Therefore most of us put small counterweights on top of the Alexa mini or attach the viewfinder to the top because the mini's CG is lower than needed with the wave with most setups - or all setups I had at least.
  3. Hi Jason. Please find pricing above, shipping will be nearly the same than to US. It is just a yoke. Send photos of your monitor mount as a pm and I will have a look or you cut the threads yourself. Best, Frank
  4. And I need one more info: Which threads do you need where on the bottom plate of the yoke? Pricing will be around 110€ to 150€ excluding VAT depending on the size. All will be made in Germany out of high-strength aluminum, anodized black producing will take 3 weeks, shipping depends on where you are and what customs do to you :)
  5. Hi Guys, since I produce a monitor yoke for the ATOMOS Shogun Inferno / Flame I thought I can also make different ones for you if you need one for a monitor with threads on the sides. If you tell me the dimensions, I'll be able to make them for you with threads where you want them also fitting ones for my monitor bridge with clamp. I already have one for the SmallHD702 but could easily do some for your monitors. What I need: - width of the monitor / meaning the distance of the 1/4"-20 threads on it's sides - distances from top AND bottom of the monitor to the middle of the 1/4"-20 threads on the sides - space you want between monitor and yoke at the bottom. I would go with at least 15mm. If you want to attach a V-mount battery on the back or a spirit level on top/bottom of the unit you may need more.
  6. All prices without VAT which is 19% in Germany
  7. UPDATE: The rod distance of the bidge is 80 mm !!! and can be braought down to 50mm !! It should fit on Sachtler monitor arms as well.
  8. Ideally, I want to gather some orders to make more pieces of the equipment. I will start producing in 2-4 weeks depending on orders. Producing will take 2 weeks as I do it in my spare time and anodizing takes another week because I am not doing it myself. The more orders I have the more extra parts I can prepare for future orders. The products are located in Germany. Shipping to US will take 10-15 working days. Shipping costs: 21€ without insurance but with tracking through DHL 38€ with 500€ insurance and tracking through DHL Payment will be accepted through PayPal, fees will have to be paid by the customer. Sorry that it will take some time. But I am just starting the business!
  9. Ideally, I want to gather some orders to make more pieces of the equipment. I will start producing in 2-4 weeks depending on orders. Producing will take 2 weeks as I do it in my spare time and anodizing takes another week because I am not doing it myself. The more orders I have the more extra parts I can prepare for future orders. The products are located in Germany. Shipping to US will take 10-15 working days. Shipping costs: 21€ without insurance but with tracking through DHL 38€ with 500€ insurance and tracking through DHL Payment will be accepted through PayPal, fees will have to be paid by the customer. Sorry that it will take some time. But I am just starting the business!
  10. Below you will find my new Yoke Bridge with Yoke Clamp for any monitor arm! On the pictures you'll find a version of the bridge which has a 70mm rod distance and is for 15mm rods. I can change change the rod distance to anything down to 50mm. The advantage: With this bridge and clamp you can rotate the monitor yoke very close to the monitor arm in every position you can imagine. Therefore you will never take off the monitor again when you switch from high- to low-mode. Just rotate it to the desired position. The clamp is rock solid because of it's huge contact area. It came back from anodizing today, I tested and love it! Rock solid piece. I can make the bridge and the clamp for 250€ if you are interested.
  11. Above you will find the pictures of the new Yoke for the Atomos Shogun Inferno / Flame series with CG Plates for the 2 options with and without V-Mount battery. It will work with the SmallRig Cage 2008 mentioned in the first post. I tested it today, CG is found perfectly, working very well! With the CG Plates HDMI IN, Remote IN is blocked as well as NP-F and SSD slots. SSDs can be changed by taking off the monitor and removing the CG Plate in 2 minutes. The Yoke has threads in theses positions: 3x 1/4"/20 at the center and in a 3cm distance from the center to each side 2x M5 at 1.15 cm distance form the center (which are needed for my monitor bridge and clamp which can be found here) I can make the Yoke for 110€ the 4 CG plates will be extra 130€ I can make any Yoke for you and also change the size and positions of the threads if you provide the details.
  12. Hi guys, I dig this out because I am making a CG-yoke for the Atomos 7" series. Please, find it here!
  13. The OP who originally designed the yoke for the Marshall 651 monitor was Tom Wills. Dear Tom, thanks again. Someone helped me rember it!
  14. For some reason I can't edit my post above ... Here is the LINK to my thread of the bridge for the monitor arm! Best
  15. Hi there! Some weeks ago I started to build a new CG-yoke for the Atomos Shogun Inferno and Flame series and the Ninja 7" versions. The thread is here. While I was thinking I remembered my old wish for a new and better option to clamp my yoke to. Here is what my precision mechanic and I designed: On the top you see a yoke in the dimensions of a 7" Atomos monitor/recorder. Below in purple there is the newly designed yoke clamp which makes it possible to rotate the yoke as far as the sled allows - and this very close to the bridge. Below in green there is the newly designed bridge for the monitor arm coming from the sled. It clamps on standard 15mm rods. The distance of the rods can be everything you want beginning from 50mm. On the image you see a 70mm distance. In some weeks I'll be able to show the prototypes.
  16. Update! Version 1 and 2: Reddish part of the side plates is V1, green part is V2 the yoke again: and I am about to make another gadget, maybe fitting on many sleds: I designed a bridge for the monitor arm coming from the post fitting nearly every steadicam monitor arm on the market. With it it's possible to tilt/shift the yoke as far as your sled allows. Please, see my other thread for it.
  17. Hi all, I will make a Yoke for the Atomos Shogun Flame. I think it will also fit on the Inferno and the Ninja Versions in 7". I can easily produce some more when someone interested. To get it mounted to the Steadicam i bought this cage: http://www.smallrig.com/smallrig-atomos-7-monitor-cage-with-sunhood-2008.html To attach V-Mounts to the cage I bought this one http://www.smallrig.com/smallrig-v-lock-assembly-kit-1846.html Because neither the monitor nor the cage have holes in the middle of the sides I will machine plates in 2 versions: VERSION 1 - with SSD and to Sony NP-F, without V-Mount battery this version will have ports blocked because of the mounting of the plates to the sides: right side: - blocked headphone jack - blocked sound jack left side: - maybe blocked HDMI in (which I try to prevent but don't see the reason for myself :) ) VERSION 2 - with SSD and small V-Mount battery 99Wh this version will also have blocked ports, even more because of the COG which is now behind the monitor right side: - blocked headphone jack - blocked sound jack - blocked SSD port (which is not so bad as it reads. Just carry a HUGE SSD and you won't have to change it often :) ) left side: - maybe blocked HDMI in (which I try to prevent but don't see the reason for myself :) ) The Yoke will be similar to the design in the attachment which is from another OP from this forum who I don't remeber and can't find anymore. Sorry! It was originally done for the Marshal 651 and is now changed by me for the Atomos Series. I will post prototype pics when ready, approximately two weeks Price will depend on orders! I will keep you updated when I know more. Best, Frank
  18. Hi all, sorry to dig this out again but I can't find the proper figures of the new M1 post diameter. Is it 2"? And if so why are so many complaining? Cheers!
  19. Hi there! I'll have them made in my workshop! Someone else needs arm posts? They will be made out of high-strength massive aluminum. And they'll be bars instead of pipes. Available in every length and also as adapters frpm 5/8 to 3/4 f.e. for Master Series
  20. Hi there I am looking for a 5" - 7" G70 / Master Arm Post (3/4" diameter) and a 3/4" diameter arm post safety ring
  21. Hi there! Can anyone give me the diameter of the GPI monitor spud, please? Thank you for helping me out! Frank
  22. Hey Andreas, who is controlling the tilt on your video? Can you fix the tilt to follow your movements and to have one axis stabilized only? Best, Frank
  23. Hi Andreas, I don't know about the DJI Ronin, but what you are telling about the MoVI is incorrect. It has actually 3 operating modes: Majestic Mode (which is single operator mode) Smooth Lock (which means that the gimbal operator operates pan while the remote operator operates tilt) Remote Mode (which is completely operated with the remote control f.e. when running with the gimbal) BTW Larry McConkey has tested the MoVI succesfully on his Steadicam. Best, Frank
×
×
  • Create New...