-
Posts
388 -
Joined
-
Last visited
-
Days Won
3
Everything posted by Richard James Lewis
-
Hugo is brilliant. Helped me out massively back in the day. Hope he's reading this and is very well. Best, Rich.
-
I'd imagine it's all techno and dolly.
-
Do not use this.
-
Help identifying legacy arm
Richard James Lewis replied to Fernando Henrique de Sousa's topic in Arms
It's not an actual "Steadicam" arm. It looks to possibly be home made or some obscure ebay unit. Don't be fooled by the sticker that someone has put on it. I can't imagine you will find out much information. Best save up a bit more and put it into something that will retain some value and be tried and tested. I'd stay well clear. Good luck. Rich. -
Which 4 canisters to buy for Pro Titan arm
Richard James Lewis replied to Greg simon's topic in Arms
I've had 4 blues in my arm for years. Pop 2 black in very rarely, occasionally for an AR job. I tend to be very anal about building very light camera setups tho. It's nice to have the springs working at their upper weight limit too. Rich. -
WTB - TRANSMITTER FOR 35MM camera
Richard James Lewis replied to danny bishop's topic in Steadicam Marketplace - Wanted
A Navtech would be your best bet. I still have mine kicking around, just incase! Let me know if you want to work out a rental thing. R x -
MK-V Evolution lower distribution box
Richard James Lewis replied to richard bellon's topic in Steadicam Marketplace - Wanted
Contact Ash or Dean at MK-V directly. They will be sure to sort you out with something. They have various old stock kicking about. I'm sure they could sort you out with something and make it work. Best, Rich. -
I've realised the first one is a "Steadyrig" gimbal from Australia. Neither of these are made anymore. Rich.
-
Second one is a "Pro Gear" gimbal (essentially a copy in part of the PRO gimbal) I can't imagine the company still exists, people had lots of issues (about 10 years ago) First one is on the tip of my tongue, but it escapes me at the moment. Good luck. Rich
-
Need 1 more HD signal in Gpi Pro Cinema HD sled
Richard James Lewis replied to Sung-young Park's topic in Sled
I think Optical Support have changed them to dual hdsdi on the cinema electronics before. R -
play within the bayonet connection
Richard James Lewis replied to JensSchroeder's topic in Camera Stage/Donkey Box
I had issues with my XCS / PRO interface too. Rotating it 180 magically fixed it. I do wrap the threads in PTFE tape and also poked a couple of tiny bits into the holes where the 3 mating pins insert, and it's all solid now. I don't take it apart ever, I fear it won't go back as nice... Never got to the bottom of it. Tolerances between different manufacturers. Check every so often everything is very tight with the post tool and a plastic hammer. R -
That aside, the Cinetronic was fairly waterproof. I don't even use covers on my Transvideo now, just a bit of tape over the buttons.
-
I think you'd be hard pushed to find 20 people who still own a Cinetronic...
-
Please help Master top stage
Richard James Lewis replied to karl cresser's topic in Camera Stage/Donkey Box
Call Optical Support. Rich -
Steadicam (Clipper) 12V to RED Dragon
Richard James Lewis replied to Digital Pro UK Ltd.'s topic in Batteries/Power
I imagine it's voltage drop through the sled and 0B size connector. -
Popping the fuses on PRO sled
Richard James Lewis replied to Victor Lazaro's topic in General Discussion
I always pull the fuses. Pull the monitor, leave the camera line on for the focus puller to do Preston things etc. I just use them as if they were power switches. Only had to replace one once when it snapped off (or someone snapped it off) R -
Could be that the aluminium plug in the end of the post has come loose. The bonding may have broken. There should be a few grub screws in there too, or pins to keep it in place which is why its not coming completely off. Take the stage off and re insert the screws and get some leverage on it. see if it's moving. Or as Jarrett said screws might be too long, but less likely if you have had it working in the past. Good luck. Best, Rich.
-
It starts again...
-
This was one of my problems with my Cinetronic ordeal and PayPal. Eveverthing took so long that I was out of time to try and claim anything when they refused to give me my money back. Not to mention that he tried to charge me a 20% restocking fee when I returned the level which I cancelled my order for, then begrugingly agreed to take delivery of when they said they had no money to refund me, which then didn't even work! His reaction being "well they work for everyone else" Yeah must have been my fault... Had to take other random stock that i didnt really need from the filmstuff store in the end to pay off his debt to me. Which surprise surprise took over a month to arrive. Clearly nobodys priority. Cowboys!
-
...or Baer Bel. http://shop.strato.de/epages/61417979.sf/en_US/?ObjectPath=/Shops/61417979/Categories/%22Motor%20Rods%20/%20Extensions%22 I also have a couple of PAM brackets with 19mm tube / rosettes so I can mount my Heden 26VEs this way too. Jerry does these. Good luck. Rich.
-
Mine never worked when I had it. Laggy and unresponsive. Get your money back if they have it, which I doubt they will, and spend it on something else. The less you have invested in that company the better you will be. Good luck. Rich.