Jump to content

Michael Soos

Premium Members
  • Posts

    15
  • Joined

Everything posted by Michael Soos

  1. Preston Sale Original owner. Mostly used with Steadicam work. Shows in very good condition. MDR3 currently in for Light Ranger upgrade. All sold together. Asking $24,500 USD. Plus, shipping. You may reach me at michaelmsoos@gmail.com for more info. HU3 G4 Handset, with quick grip release, Blue Dot upgrade MDR3 G4, 4 Channel Motor Driver, Blue Dot upgrade, w/antenna Focus/Iris G4 (aka Single Channel) with blank mapping disk (missing eye bolt) Five Mapping Rings (Ai, Bi, Ci, Di, Ei) One Aluminum mapping ring by Filmfrog Two DM2X Digital Motors with 15mm rod & .80m gear output One DM1X Digital Motor with 15mm rod & .80m gear output Three Preston Motor Rod inserts Four Li-Ion Batteries FM50 Two Digital Battery Travel Chargers for FM50 with car adapter One 30-foot Main Command Cable for wired operation HU3 to MDR3 HILL Accessories: Four Hill Motor Mount Inserts Four PAM D Rod Clamps One PAM D Rod Offset Arm Clamp Two PAM Arm 5/8” Two PAM Arm 15mm Two Uni-Clamp Arm with 3.75” long shaft One Remote Follow Focus Rain Cover
  2. Downsizing my gear, make a reasonable offer and they could be yours:)
  3. Bought the Lambda new and was part of my operating package. It is in great condition. I have kept all the original papers. Serviced the head and replaced the fluid modules in 2018. Comes with a telescopic handle; short handle; dovetail plate and all protected in a Clydesdale case. The case and contents weigh roughly 70 lbs. Buyer will assume all transaction and shipping fees. Cartoni Lambda Service.pdf Asking $10,499
  4. Selling my Ken Lab KS-6 Gyros. I am the original owner and it was used on an MKV sled. The gyros are very quiet and in excellent condition with very little use. I am asking $3, 650 USD. Shipping is not included. The item is based in Toronto, Canada. 2 x KS-6 Gyro w/2 pin Lemo power cable 1 x Dual 12V DC inverter 1 x DC inverter 12V curly power cable, 2 pin Lemo to XLR 2 x Kenyon mounting plate with Tommy bolts in both 1/4 20 and 3/8 16 bolts to allow direct mounting for handheld work in aircraft as well as Steadicam. 2 x MKV hexagon gyro mounting plate 1 x gyro 2 pin Lemo to MKV 3 pin Lemo power cable 1 x XLR male to XLR male bridge cable 1 x Hardigg Stormcase iM2200 Reply to: michaelmsoos@gmail.com
  5. Make a reasonable offer and it can be yours:)
  6. Selling my Light Weight Tiffen Ultra Vest (Cleaned and in very good condition), Model 252-7850. Includes: Original DOLT duffle Vest Bag, 2 spare vest buckle and receptor, and has the titanium socket block. I am the original owner. Asking $3,000.00 USD. Buyer pays shipping; item is based in Toronto, Canada. I can, however, arrange for shipping and add it to the cost. Michael michaelmsoos@gmail.com
  7. Selling my 3 channel Preston MDR2 G4 microwave transceiver. Includes: HU3 antenna and a serial PC cable for upgrading MDR. I will also include the Cinetape Interface Box cable that plugs into the serial port of the MDR2 and will send information wirelessly to a HU3 handheld unit. I am the original owner. The MDR2 G4 is in great condition! Asking $4,900.00 US Shipping not included. However, I can arrange for shipping and add it to the cost. Michael michaelmsoos@gmail.com
  8. Selling my PAG AR124NP (Model: 9769). It's an autoranging 4 channel fast-charger for any mix of Ni-Cd batteries in the range 4.8 to 14.4V, 1 to 7Ah. One 2.1mm (F) to XLR-4 (M) charging cable. Unit is practically new! I'm also including my PAG (Model: 9774) Vehicle Battery-Power DC/DC Converter - 12v to 300v DC. Adapts 4 to 14V AR Series chargers (including the one above) for in-car use. In excellent condition as well. Asking $500 US. Shipping not included. However, I can arrange shipping and add it to the cost. Contact me at: michaelmsoos@gmail.com
  9. Selling my Preston brackets as a whole. Content: 2 Step Down Bushings 19mm/15mm and one 19mm/.625"; Arri Handle; Arri 15mm Bridge; Arri/PV 19mm Swing Arm (2 tops and 1 bottom rod); Moviecam Bracket; PV Steadicam bracket system w/2 swing arms. All brackets and Kipp handles in very good condition. Asking $950US. Buyer pays for shipping. Contact me at: michaelmsoos@gmail.com
  10. Selling my 'classic' Hi-Hat Steadicam Garfield Mount; Mitchell Mount; socket block. Asking $385 US Shipping not included, however, will arrange shipping for you and will be added to the cost. Email me at: michaelmsoos@gmail.com
  11. This excellent and well maintained unit is still for sale.
×
×
  • Create New...