Vladimir Peeters SOA

Hi dear collegues, owner of a MS. I have a lot of spare parts to sell. Everything is in Europe (France) ready for packaging (Shipping isn't included in the price). Please contact me at vladimirpeeters@hotmail.com - Master K section 1500$ : all the electronic inside is working perfect (frameline generator, level, video, battery), except the front 6v DC plug for video recorder. (Master Film 24V)

You should also have a look on Tor market

The diameter is 1,5" And the price 2500$ + shipping

Tiffen Master Serie Docking Bracket 200$ need to replace the secutity pin (lost) located in Paris Contact : vladimirpeeters@hotmail.com

SONY Universal 401-50 200$ + shipping located in Paris Contact : vladimirpeeters@hotmail.com

This gimbal works freely. It would be a good idea to have a maintenance, never done yet because nobody do it in France

Located in Paris Make an offer vladimirpeeters@hotmail.com

Monitor: High intensity 5" CRT 16:9/4:3 switchable aspect ratio Power consumption: 30 Watts Scan rate: NTSC/PAL Adjust the monitor by hand, without affecting sled balance I'm selling the cable as an extra for 50$ Little scratch on the screen. Located in Paris Price 800$ vladimirpeeters@hotmail.com

The lowest price on the market. Everything works perfectly MASTER ARM : 5000 US$ Iso-elastic arm Camera weight capacity 20-45 lbs In perfect working and good cosmetics conditions comes with : - Soft Bag - Rain Cover - Low-mode bracket MASTER FILM 24V SLED : 5000 US$ Comes with : greenscreen monitor 2 batteries hardcase docking bracket PAG 4 channels charger & 24V block non-motorized stage I can sell extra batteries or cables The rig has been fully serviced in 2012 Frame line generator, artificial horizon, … all the electronics works, except 6v output (bottom) & the 12V DC output (top), you don't need them. Email me at vladimirpeeters@hotmail.com And look the work I made with this material on www.vladimirpeeters.com

Hi all, I am selling an excellent steadicam for the lowest price on the market. I sell the arm and sled (no vest) They work perfectly MASTER ARM : 6500 US$ Iso-elastic arm Camera weight capacity 20-45 lbs In perfect working and good cosmetics conditions comes with : - Soft Bag - Rain Cover - Low-mode bracket MASTER FILM 24V SLED : 6000 US$ Comes with : greenscreen monitor 2 batteries hardcase docking bracket PAG 4 channels charger & 24V block If necessary, I can sell esxtra batteries or cables The rig has been fully serviced in 2012 Frame line generator, artificial horizon, … all the electronics works, except 6v output (bottom) & the 12V DC output (top), you don't need them. non-motorized stage. Email me at vladimirpeeters@hotmail.com And look the work I made with this material on www.vladimirpeeters.com

MASTER ARM : 6500 US$ Excellent price because of cosmetics conditions. This iso-elastic arm is really excellent to fly big cameras. Camera weight capacity 20-45 lbs ! In perfect working condition, I am still working with, but not cosmetic (some bumps, pics soon) You can see my work at www.VladimirPeeters.com It comes with : - Soft Bag - Rain Cover - Low-mode bracket Email me at vladimirpeeters@hotmail.com The material is in Paris, France. I can send it worldwide. You will be charged for duties and taxes. This is your sole and own responsibility. This cannot be prepaid by the shipper. You will like this material. It was my backup steadicam. Vladimir

MASTER FILM 24V SLED : 6000 US$ Very good price, very good opportunity, it's everything you need to fly big cameras elegantly This sled is in a perfect working and good cosmetic condition. The rig has been fully serviced in 2012 For more rigidity, the stage is non-motorized. Frame line generator, horizon, … all the electronics works, except 6v output (bottom) & the 12V DC output (top), you can fix it easily, but you don't need them. It's sold with only one battery and without the CRT Monitor If necessary, I can additionally sell Pag batteries, extra cables, and Monitor (as optional for low prices) The steadicam come in hard cases with a Master docking station. I'm offering the PAG 4 channels charger & 24V block Email me at vladimirpeeters@hotmail.com or visit www.vladimirpeeters.com The material is in Paris, France. I can send it worldwide. You will be charged for duties and taxes. This is your sole and own responsibility. This cannot be prepaid by the shipper. You will like this material. It was my backup steadicam. Vladimir