Stuart Howell

Sold

Selling the last of my gear. Walter Klassen Suspender Rig. Very little use. Comes with travel 'tube' and spares. Harness for sale separately on the forum, but ask about a 'bundle'. £2000 + shipping ONO email me at stuhow at me dot com for any questions/enquiries. Thanks.

Selling the last of my gear. Walter Klassen 'Flex' harness. No carbon arm. Bought to upgrade my original harness, and worn for 3 shots only, so as new. I'm 5'10" and 75kg/165lbs and fits like a glove. Comes with original soft bag and spares. Located London, UK, so ask for shipping. £1800.00 + shipping ONO

Selling the last of my gear. Walter Klassen back mount harness. Used but well cared for. New pads and covers (never worn). Carbon arm is currently right side mounted. I'm 5'10 and 75kg/165lbs. Fits like a glove. Comes with a full set of spares and a padded Peli Storm wheeled case. Currently in London UK so ask for shipping. £2500.00 + shipping ONO

TIFFEN Exovest for sale. As new condition, about 18 months old, and only used twice. Bought when I sold my rig so I’d have a vest in case I had to do any Steadicam, but never used. Comes with original TIFFEN soft case, manual, additional chest pad, and a Klassen back mount adaptor. Located in London but will ship anywhere. Please contact for shipping cost. £3500/€4200/$4400 +20% VAT in UK and EU unless you have an EU VAT number. stuhow@me.com

Thanks Frederic, I have been through every option. Seems to be the 'Schnitte' that is being re-designed, not the 'Stick'. Am talking to Christian Betz who is being amazingly helpful, and he may have a custom solution. Talking to Preston too.

Hi, Desperately need to find a way to control zoom myself. I'm using a PRO with a Red Dragon and Angenieux compact zooms. Can't seem to find anything available to buy (Betz are re-designing so Stick isn't available until January), so if anyone has a solution for sale or rent then please get in touch. On a feature shooting at the moment. Thanks, Stuart

Selling my backup PRO sled: - PRO III Donkey Box with receiver mount - PRO 9" ARRI/PV camera plate - PRO SD J-box and cabling - PRO III Gimbal with clamp (new bearings last year) - PRO II telescoping post (adjustment with Kips clamp) - PRO II battery rack with recorder mount (AB mount - batteries not included) - 2x Jumper blocks for battery rack - PRO Gyro bracket - for gen II battery rack - PRO III monitor (last of the green screens - still the most visible in direct sunlight) with frame lines - PRO digital level - Betz "Churchill" monitor bracket - Docking bracket with post clamp - PV 24v power cable - ARRI 24v power cable - PRO monitor cable - PRO Superpost with wrap grip and flight case. This is a NON-HD rig. Sled will come in original flight case, with tools for adjusting Gimbal and Donkey Box etc. Really great condition. Serviced by Optical Support in London. Please email me for additional/hi-res images. stuhow at me dot com asking £8000 + VAT/$12500/€9500 + shipping.

Original retro fit handsfree transporter stick for handsfree operation of latest lean steer Segways - X2 and i2. As new condition. Bought new from 'Handsfree Transporter' 6 months ago for a film project which never materialised. Used for practice only. Fully adjustable, top of the range version. Swaps over with Segway steering stick in around 5 minutes. No hard mount, as the project involved stepping on and off the Segway. Great tool, and even with fully loaded ARRICam LT it works great. Fun too - even without the Steadicam ! Cost new €2500.00. Asking €1800/£1500/$2300 + shipping. Please email for any further info. stuhow at me dot com Low mileage Segway X2 also available in UK (Europe possible too - email) Thanks

Original retro fit handsfree transporter stick for handsfree operation of latest lean steer Segways - X2 and i2. As new condition. Bought new from 'Handsfree Transporter' 6 months ago for a film project which never materialised. Used for practice only. Fully adjustable, top of the range version. Swaps over with Segway steering stick in around 5 minutes. No hard mount, as the project involved stepping on and off the Segway. Great tool, and even with fully loaded ARRICam LT it works great. Fun too - even without the Steadicam ! Cost new €2500.00. Asking €1800/£1500/$2300 + shipping. Please email for any further info. stuhow at me dot com Low mileage Segway X2 also available in UK (Europe possible too - email) Thanks

Selling my Ronford 2015 Head. Fluid Boost adaptor, Ronford snap plate, custom engineered front bar (Ronford/O'Connor hybrid), Long and short pan bars, Ronford Flight Case. Good condition. Regularly serviced by Ronford in UK. Email for pictures. £2500 + shipping

For Sale - PRO II Center Post. As new condition. Extends 46cm to 70cm. $1200/€800 or offers, plus shipping.

Hummingbird 'BLACKBIRD' 6.5" LCD Monitor for sale Selling my back-up Hummingbird "BLACKBIRD" 6.5" sunlight viewable SD LCD monitor. Used once to test it and then it's never been out of the box in 2 years ! As new condition. Built in Frameline. PRO (LEMO) connector as well as BNC & HIROSE 6 pin. Modified bottom plate with tapped out 5/8" thread to take standard mount. Can throw in PRO mount if required, which just bolts on. Now made by Lumavec (www.lumavec.com) http://www.steadicamforum.com/index.php?showtopic=9841 Email for more pictures. £2000 / €2300 / $3200 or offers, plus shipping. email me at stuhow@mac.com

Hi John, Yes, as Eric said, just attaches using 4 screws straight into the PRO J-box or similar. Post size doesn't make any difference. Stuart

PRO 4 piece post upgrade / conversion w/ Gimbal & Monitor Bracket 4 Piece Carbon Fibre 2" Post/Gimbal/Monitor Bracket Comprises: ? 2" 4 stage carbon fibre post 21" - 72" (built in super-post) ? MK-V V2" Advanced Gimbal ? MK-V V2" telescopic monitor arm in PRO mount ? PRO Junction Box ? Jerry Hill 'Gorelock II' docking bracket with 2 docking rings. Designed to totally replace the PRO post system from the donkey box/topstage down to the lower J-Box, or be used as a basis for a new sled (add topstage, monitor and battery base). It can be swapped over for the PRO post in minutes and on set, or as a permanent replacement : remove the 4 screws on the base of the post system and the 4 screws that hold the topstage, then swap the post system over, re plug the new cable and re-bolt. Slightly longer than PRO post fully collapsed (about 1"). Selling with Gorelock II docking bracket and two rings. Just add donkey box, monitor and battery base for a complete rig. (Compatible with any PRO or MK-V components) Extremely good condition and used only occasionally as back-up / additional rig ! Whatever your thoughts about MK-V, this does work very well ! Post assembly new from MK-V is over $14,000 / ?8900 / £7000 Asking $9000 / ?6000 / £4500 + shipping. I also have a mint condition PRO Donkey Box II available for $2500/?1575/£1250 PRO Vest/Harness (very good condition) also available for $3000/?3800/£1500 If anyone wants everything, I'll throw in the original PRO / Anvil vest flight case for shipping. Please email if you need any more pics or information. Located London (UK) but can ship anywhere. Stuart Howell Camera/Steadicam Operator mail: stuhow at mac.com

Anton Bauer Titan Twin Charger Used as a back up / 3rd charger only. Very good condition. Charges 2 A/B Gold Mount batteries simultaneously (any chemisty) Asking $450/?280/£225 + shipping Please email if you need any more information. Located London (UK) but can ship anywhere. Stuart Howell Camera/Steadicam Operator mail: stuhow at mac.com

Anton Bauer Dual 2701 Interactive Battery Charger/PSU, with Discharge Module Well used but very good condition. Charges 2 A/B Gold Mount batteries sequentially (any chemistry). Doubles as 70W Power supply. asking $800/?500/£400 + shipping Please email if you need any pics or more information. Located London (UK) but can ship anywhere. Stuart Howell Camera/Steadicam Operator mail: stuhow at mac.com

Looking for PRO Lite base ASAP Thanks Stuart Howell, ass BSC Camera/Steadicam Operator London, UK