Benjamin Treplin

Riedel Bolero is by far the best and most versatile intercom I have come across so far and by far the most expensive too.

I lets you tie in comtec and regular radios. You can create groups like camera, operators, grips, etc. Talk to groups or individuals.

One antenna supports 10 belt packs. Belt packs have bluetooth. We used these headset on the last show. 

Selling 4 XCS dovetail plates. €100 each.

They do NOT fit BetzTools Wave or topstage without machining.

Everything is based in Germany. I'd prefer to sell within the EU but can ship worldwide. Buyer pays shipping!!

For sales within Germany 19% VAT is charged.

For sales within the EU a valid VAT # is needed to avoid 19% VAT charge.

UPDATE 

This stuff has to go so make me an offer please.

MISCELLANEOUS:

1. ARRI SR3 low mode bracket Make an offer please.
2. HILL 435 low mode bracket w/ allen key, pouch — like new (never used) Make an offer please.
3. PAG AR Series 2 battery charger w/ 4 AntonBauer battery charging cables. give away - pay shipping only
4. PAG MC 124 battery charger w/ NP-1 4x socket charger bracket. give away - pay shipping only

TX/RX:

1. SD TX/RX set: Canatrans PAL vers. (incl. 2x antenna, manual) + Transvideo Atlas receiver (incl. 2x antenna, short power cable) Make an offer please.
2. HD TX/RX set: Teradek Bolt 300 1+2 w/ 2 long d-tab cables, 1 short d-tab cable, usb cable, 3 ac power supplies, manual Make an offer please.

TRIAX CABLES:

1. 2x LEMO Triax cable (PCA. 4E) (one backup never used) length ~1,8m Make an offer please.
2. 2x Fischer Triax cable (1051) (one backup never used) length ~1,8m Make an offer please.
3. 2x Damar & Hagen ARD Triax cable, length ~1,8m Make an offer please.

Everything is based in Germany. I'd prefer to sell within the EU but can ship worldwide. Buyer pays shipping!!

For sales within Germany 19% VAT is charged.

For sales within the EU a valid VAT # is needed to avoid 19% VAT charge.

UPDATE / NEW PRICES:

MISCELLANEOUS:

1. ARRI SR3 low mode bracket €200
2. HILL 435 low mode bracket w/ allen key, pouch — like new (never used) €200
3. PAG AR Series 2 battery charger w/ 4 AntonBauer battery charging cables. give away - pay shipping only
4. PAG MC 124 battery charger w/ NP-1 4x socket charger bracket. give away - pay shipping only

TX/RX:

1. SD TX/RX set: Canatrans PAL vers. (incl. 2x antenna, manual) + Transvideo Atlas receiver (incl. 2x antenna, short power cable) €200
2. HD TX/RX set: Teradek Bolt 300 1+2 w/ 2 long d-tab cables, 1 short d-tab cable, usb cable, 3 ac power supplies, manual €950
3. 2 Teradek Bolt Sidekick (one never used) each SOLD
4. Teradek receiver mounting bracket for A/B batteries w/ 16mm mount SOLD

TRIAX CABLES:

1. 2x LEMO Triax cable (PCA. 4E) (one backup never used) length ~1,8m €150
2. 2x Fischer Triax cable (1051) (one backup never used) length ~1,8m €100
3. 2x Damar & Hagen ARD Triax cable, length ~1,8m €50

Everything is based in Germany. I'd prefer to sell within the EU but can ship worldwide. Buyer pays shipping!!

For sales within Germany 19% VAT is charged.

For sales within the EU a valid VAT # is needed to avoid 19% VAT charge.

Sachtler TB-6 + sled rain cover SOLD

Custom made tally light with photodiode. SOLD

Gorelock 1 GAD1 docking fork w/ 2 docking rings 1.495″ €300,- SOLD

Hi all,

cleaning up my basement and a few items have to find a new home.

MISCELLANEOUS:

1. Sachtler TB-6 + sled rain cover Sold
2. Gorelock 1 GAD1 docking fork w/ 2 docking rings 1.495″ €300,- Pending...
3. ARRI SR3 low mode bracket €400
4. HILL 435 low mode bracket w/ allen key, pouch — like new (never used) €350
5. Custom made tally light with photodiode. Hirose 4-pin connectors for 12vdc power and passthrough signal to high bright LEDs for the monitor. €50
6. PAG AR Series 2 battery charger w/ 4 AntonBauer battery charging cables. Make an offer please.
7. PAG MC 124 battery charger w/ NP-1 4x socket charger bracket. Make an offer please.

TX/RX:

1. SD TX/RX set: Canatrans PAL vers. (incl. 2x antenna, manual) + Transvideo Atlas receiver (incl. 2x antenna, short power cable) €500
2. HD TX/RX set: Teradek Bolt 300 1+2 w/ 2 long d-tab cables, 1 short d-tab cable, usb cable, 3 ac power supplies, manual €1,300
3. 2 Teradek Bolt Sidekick (one never used) each €250
4. Teradek receiver mounting bracket for A/B batteries w/ 16mm mount €50

TRIAX CABLES:

1. 2x LEMO Triax cable (PCA. 4E) (one backup never used) length ~1,8m €200
2. 2x Fischer Triax cable (1051) (one backup never used) length ~1,8m €180
3. 2x Damar & Hagen ARD Triax cable, length ~1,8m €95

Everything is based in Germany. I'd prefer to sell within the EU but can ship worldwide. Buyer pays shipping!!

For sales within Germany 19% VAT is charged.

For sales within the EU a valid VAT # is needed to avoid 19% VAT charge.

Pictures MISCELLANEOUS:

Pictures TX/RX:

Pictures Triax Cables:

17 hours ago, Felix Lang said:

Hey Benjamin,

here it is.
https://vimeo.com/400376534

Thanks Felix!

On 4/2/2020 at 8:43 AM, Marco Dardari said:

The second thing is the bounce on the tilt when setting a position with the gimbal button both in "normal mode" and in "friction mode", as Larry McConkey also described very well in the video he made a few days ago.

 

Do you have a link to the video?

Some browsers or their settings force https for security reasons. You website only supports http.

Looking for a DUAL 2722 charger.

please PM me.

Yes. Send you a pm.

I own s/n 15 still with the Steve St. John's tag. Bought in 2007 from Gregory Smith.

Frankensteind it to my XCS with a PRO donkey box 1 bought from Alec.

Hope you'll find one Roman!

I had similar issues with regular Alexas and REDs in combination with my Ultimate 1 electronics.

12 vdc was hard wired, so always power on the camera. The moment I switched the Ultimate 1 electronics on (28vdc inverter and some minor bits and pieces) the camera did a reboot. Probably it takes only a few milliseconds of a voltage drop to cause an off/on at the camera.

Looking for GPI PRO gyro mount. The whole assembly that goes onto a gyro.

Best, Benjamin 

Hi Alastair,

what version of a PRO rig do you have?

Did you on/off switch any other devices on your rig that was in sync with the LF turning off?

Did it turn off or did it reboot?

Preston in the mix? Powered over the rig or camera?

Depending on the XCS plates you have (there are a few variations) they might not fit the M1. The dovetail face might not be high enough. It depends on how wide the vertical part of the plate is.

Shipping only to Europe. Sorry mate.

Selling two (2) used XCS sliding camera plates. €250 each.

Selling a bunch of used XCS plates.

3 in mint condition €180.

https://www.dropbox.com/s/32yaasjpdbiihy7/Transport-DIONIC%20HC.pdf?dl=1

It's just the relevant page of the user manual.

You'll find that on the Antonbauer website.

Looking for an old thin XCS camera plate Greg Bubb used to have in the early 2000s.

Thanks AJ!

Doing a movie with Daniel Radcliffe at the momentan. For some shots we attached an iPhone to him.

Got great results with smoothing between 10 and 15. Sometimes we went as far down as 6.

There is quite a gap between 6 and 5. 5 is unusable whereas 6 works for certain shots.

Hi Ramon, Jens,

I would love to see a few pictures of your solutions.

Ben

Excellent!

What settings did you use when attaching the phone to the actors?

it depends...

Are you seeing vibrations in your footage as well?

A bit more information on your setup would help...