Michael Craven

Hello, I'm selling my trusty Preston kit. Its been very reliable, two HU2 two MDR's are being included. I was using all of my cables and my MDR g4 Blue dot on Steadicam, using the studio build's HU3. On the few random jobs I used the HU2's, and they worked fantastically, but the batteries are due for a recall, or an omnishot adapter. Please e-mail me any questions, additional photos are available as well as a PDF of the below inventory. $10,500.00 michaelwcraven@gmail.com HU2’s s/n 2687Transmitter S/N 49764 All buttons, sliders, encoders working nominally. s/n 2791No transmitter All buttons sliders working. Knob not as smooth as 2687 AccessoriesBag of lens marking rings 2x Fast chargers 5x Batteries 4x Charger contact replacements 3x spare antenna Custom long cable for remote iris sliding. DM2 Motors S/N 338119mm swing arm 19mm - 15mm reducer S/N 263319mm swing arm 19mm - 15mm reducer MDR2’s s/n 1555 For use with the HU2’sRunning matching firmware for the HU2’s Works great s/n 2447For use with HU3’s(Not included) Blue Dot G4 upgraded Firmware v1.53 Works great BracketsPro Sled Dovetail 19mm Rod with 15mm reducer Dovetail + other weird one. Spare parts3x spare antenna 3x spare channel select covers. Cables 2x Motor Straight to RA Power1x Y 3Pin Run R/S cable. 2x D-Tap 2x 3pin fischer 1x 3Pin 24v XLR 1x 4pin 12v XLR 1x Pana Power 1x 24v moviecam Fischer Run1x RED BNC 1x Arri 1x 3 Pin R/S 1x Pana CineTape ($600) Serial update cable

Looking for 6 used IDX batteries.

Message sent.

Has anyone upgraded to the mdr3, and has spare to sell?

Thanks for the interested, was already contacted within and hour of posting and found exactly what i needed! Thanks.

I'm looking for the full kit, thanks!

Batteries found.

This has been long overdo, I just wanted to give a glowing review of Erik Anderson. First time I came in contact with Erik was purchasing a G-zoom( Focus and Zoom control on the Gimbal for ENG lenses). It has worked flawlessly for three years now, and been an integral part of my kit. Ordering was simple and quick to ship, this should be expected. My first extremely positive experience with Erik began when the show I was working for "upgraded" their lenses. The shows truck did not land until the day of the event, so I didn't have a set day, however It is a simple set up that has been replicated for two seasons at this point so I was not too worried about missing a set day. I got the rig up balanced and screwed the connector from the gzoom into the lens. No dice, anytime I used the rocker it just zoomed wide at a high rate. I checked all the connections, everything fine. I check switches... check the lens.... everything is fine... slowly It starts to dawn on me that I'm totally screwed four hours before kick-off. I franticly open up my Gzoom case and get Erik's card out( he ships it with all of his stuff) and give him a ring.. ring...ring..voicemail. I leave a quick message explaining the problem, hang up. With-in minutes Erik calls me back, he spends time going over the whole set up till we figured out what was going on. Its was a new fujinon lens that uses a screw on connector instead of the hirose, same as canon, but they switch two pins... never can make it easy can they..... While on the phone Erik is looking up lenses wiring schematics and solving the problem. He walks me though taking the connector apart and switching the leads, putting it back together then testing it. Never once getting impatient, staying on the line for 30 minutes until we got it working, all on a sunday morning at 8am. Without his "ace" technical support I woulda been shooting with a prime all game. Amazing customer service. That example was over a year ago and I recently had another extremely positive experience when I sent in my Gzoom for service as I had split the cables multiple times from ziptieing cables to my rig...wear and tear repair... I also found out from the forums that he also runs CamHeadsets.com which has a great steadi solution for live work. Normally I've been using wireless PL's, with the box on my vest. This allowed me to key in while operating. The new show I just got booked for would be going off the camera back as I'd be all wired up, so I wanted to find a solution so that I could talk while operating. Erik walked me through his product Steaditalk, after receiving it, its all it was cracked up to be, and an added bonus screaming fans don't make my ears ring by the end of a game. However when I ordered the product on his site I made an assumption that it was boxed up and ready to ship, my mistake. I purchased it for a show with a week lead time so when I didn't receive it four days after I purchased through his website I gave him call " Hey Erik, just wondering if you got that shipped out", He texted me back letting me know he was booked for a week, and there were too many orders in to get to mine out but he'd get it out after.....I was not expecting that reply, and again I released I was SOL and would be wearing a hamburger helper and not able to key in..... I quickly call him back at 8:30PM explained that I needed it for a job that started in two days. Without skipping a beat he said I'll work on it through the night and get it shipped out before his 6am departure for his week long gig. Stellar customer service. All of his products have been rock solid, he's an operator as well, and the product designs show it, very well thought out simple solutions.

E-mail sent :)

SOLD! Thanks for all the interest!

Mine was pinched and the analog video is now gone. Hoping someone might have one laying around after an HD upgrade?

Sale fell through, update No International sales! $4,000.

Thank you for the reply Erwin, we should sticky that. @robinthwaites; Yes this is used gear. I also was hearing I should gift wrap it and say merry christmas.

Does anyone have some advice on how to smoothly go through a transaction with the least cost? Payment Methods? Shipping? Customs? Packaging? This would be a US to the UK shipping.

Sale Pending