Katy Most

SOLD

SOLD

Still Available for Sale: 1. Power Cable, Archer 3 Pin Lemo Male to Red One 12V: $310, sell for $180 2. 2 x Power Cables, Archer 3 Pin Lemo Male to Right Angle Female XLR-4: $174x2=$348, sell for $95 each or $170 for both 3. Cable, 2 Pin Lemo Male to Male XLR-4: $250, sell for $150 4. Cable, 2 Pin Lemo Male to Right Angle Female XLR-4: $250, sell for $150 5. Replacement Connector for Archer sled 3 Pin Lemo Female connector: $150, sell for $80

Power Cable, Archer 3 Pin Lemo Male to Arri Alexa 12V: $250, sell for $150 - SOLD Power Cable, Archer 3 Pin Lemo Male to Arri Amira/Arri Mini 24V: $250, sell for $150 - SOLD Power Cable, Archer 3 Pin Lemo Male to Red Epic/Scarlet/Dragon 12V: $345, sell for $200 - SOLD

One with the case was SOLD Another is still available for SALE.

$550 each set

$2500

SOLD

SOLD

SOLD

Director’s monitor analog transmitter/receiver case: * Modulus SD Video Link Rx with antenna and power cable * TFL SD Video Monitor with build inTx and battery plate * AC power cable and ptap power cable * SD Video Monitor $200 If interested email me at mostcams@gmail.com

Power Cable, Archer 3 Pin Lemo Male to Arri Alexa 12V: $250, sell for $150 Power Cable, Archer 3 Pin Lemo Male to Arri Amira/Arri Mini 24V: $250, sell for $150 Power Cable, Archer 3 Pin Lemo Male to Red Epic/Scarlet/Dragon 12V: $345, sell for $200 Power Cable, Archer 3 Pin Lemo Male to Red One 12V: $310, sell for $180 2 x Power Cables, Archer 3 Pin Lemo Male to Right Angle Female XLR-4: $174x2=$348, sell for $95 each or $170 for both Cable, 2 Pin Lemo Male to Male XLR-4: $250, sell for $150 Cable, 2 Pin Lemo Male to Right Angle Female XLR-4: $250, sell for $150 Replacement Connector for Archer sled 3 Pin Lemo Female connector: $150, sell for $80 If interested email me at mostcams@gmail.com

Cable, Fisher 6 Pin Male (PRO) to Male XLR-4 + Cable, Fisher 6 Pin Male (PRO) to Coherent(Open-End) $100 If interested email me at mostcams@gmail.com

7" 700 NIT LCD composite monitor with frameline generator Good condition $250 If interested email me at mostcams@gmail.com

Jerry Hill Arri BPA-1 Alexa Plate Adapter: Like new $50 Email me if interested to mostcams@gmail.com

Pelican Micro Case 1060 with Decimator design Version 2 (3G/HD/SD)-SDI to HDMI Down-Converter, AC Power adapter, Anton Power D-Tap to decimator cable. $200 If interested email me at mostcams@gmail.com

Jerry Hill 2-N-1 Motor Mount for Arri cameras rods with Jerry Hill #SR5 Square to Round 15mm, 5" long Iris Rod: $135 Jerry Hill #SR35 Square to Round 15mm, 3.5" long Iris Rod: $45 Jerry Hill #SR7 Square to Round 15mm, 7" long Iris Rod: $45 Like new Sell all for $135 If interested email me at mostcams@gmail.com

FOR SALE: Tiffen Vehicle Mounts: "High Hat" vehicle mount with Archer socket block. Regular or goofy mounting. Easy to attach to plywood. Bridge detaches for mounting to vertical speed rail, comes with U-bolts. One set comes with A&J Case and bolts and another set comes w/o case and w/o bolts that you can see in the picture below, but with extra speed rail mounts. $600 each If interested email me at mostcams@gmail.com

Selling my Steadicam Tiffen LX Vest - Very good condition with Walter Klassen Vest Bag - Like new $2700 If interested email me at mostcams@gmail.com

Tiffen Steadicam Archer 2 Full Kit with all the bells and whistles is turn key and ready to go - Location: Los Angeles It was a blessing to know and be part of the Steadicam community! But due to my recent injuries resulting from a car accident, I have to separate from my beloved Steadicam kit. I put my love and care into building and working with my kit. And now it’s time to find the right home for it. This Tiffen Archer2 Steadicam kit with all the bells and whistles is turn key and ready to go. It can be utilized for any production. Please find, below, the description of what the kit includes. CASE A: Sled Case HPRC 2760W Sled Case with Customer cut foam by Innerspacecases.com Steadicam: Archer 2 SE Steadicam Tilt Motorized Sled with the HD Marshall Monitor Steadicam Motorized Sled Gimbal remote Allen 1/4 wrench to adjust the Steadicam vest Low Mode Kit (F-bracket and Handle Clamp) with 2 custom made extensions to go lower to the ground Tiffen Steadicam Arm rain cover Jerry Hill Standby Cover WHM-BG artificial horizon module 4 x Steadicam weights and attachments Additional Battery V-mount plate that goes underneath the sled Sos Plate Long Plate Longplate with spacers made by Peter Abraham CASE B: Arm and Vest Case Walter Classen Case Arm carrying bag Tiffen LX Vest Tiffen G-50 arm Monopod with custom-made Docking bracket #GAD1/HBBF quick released Docking plate GAD 1" /HBBF, .500 Balance Studs with #DR1-1.495" DR1-1.495" I.D. for Archer Top and Bottom Post Tiffen Steadicam Docking/Dynamic balance Bracket CASE C: Batteries Case HPRC 2700 Case 2 x IDX Battery charges 8 x IDX Endura 96Wh Li-Ion V-mount Batteries CASE D: Tiffen Vehicle Mount A&J Case Tiffen Vehicle Mount: "High Hat" vehicle mount with 2x Archer socket block. Regular or goofy mounting. Easy to attach to plywood. Bridge detaches for mounting to vertical speed rail, Comes with U-bolts and screws Falltech Safety Belt CASE E: Accessories Case Bucket Boss 66018 Pro Racer 18 with All-Terrain Bottom: Pelican Micro Case 1060 with Decimator design Version 2 (3G/HD/SD)-SDI to HDMI Down-Converter, AC Power adapter, Anton Power D-Tap to decimator cable, 15mm Carbon Fiber Rods: 2 x 8 inch and 2 x 4inch 2 x Accessory/Cable pouch Jerry Hill 2-N-1 Motor Mount for Arri cameras rods Jerry Hill #SR35 Square to Round 15mm, 3.5" long Iris Rod Jerry Hill #SR7 Square to Round 15mm, 7" long Iris Rod Media Blackout Intersex Plate (is the world’s first Gold Mount and V-Lock battery plate coupler. The plate mates with a Gold mount via its T-Studs which fit more snugly than the OEM Anton/Bauer studs, so there is no wiggle when mounted to a gold mount plate). Blueshape V-mount Plate with Gold Mount Adapter (takes any piece of gear that accepts Anton Bauer Gold Mount Batteries and converts the battery plate to accept V-Mount Batteries, It also adds a D-Tap connection on the plate) IDX Endura V-mount Plate with 4 Pin XLR Male connector and D-tap input (Designed to mount on any V-Mount plate and accept power through an industry standard male 4-pin XLR. The NBV-XLR allows you to power your equipment off of a large 12V battery block or 12V AC power supply. A D-Tap allows you to power onboard accessories as well). Jerry Hill Arri BPA-1 Alexa Plate Adapter Rod mount 15mm to 19mm adapter/riser String: adds stiffness to any Steadicam sled for the price of a piece of string Cable, Archer Lemo 3 Pin Male to 4x D-Tap Breakout 12V and 2 Pin Female Lemo Cable, 8 Pin Lemo to Angles 4 Pin XLR Female and BNC 3 x Cable, Archer 3 Pin Lemo Male to Angled 4 Pin XLR Female power cable Cable, Archer 3 Pin Lemo Male to Arri Amira/Arri Mini 24V Cable, Archer 3 Pin Lemo Male to Arri Alexa 12V Cable, Archer 3 Pin Lemo Male to Arri Alexa 24V Cable, Archer 3 Pin Lemo Male to Red Epic 12V Cable, Archer 3 Pin Lemo Male to Red One 12V Cable, 8 Pin Lemo Male to 8 Pin Lemo Male 12V monitor Cable, 1 to 4x D-Tap Socket Splitter Cable, 4 Pin Lemo Male to 4x D-Tap Socket Splitter Cable, 2 Pin Lemo Male to 4 Pin XLR Male Cable, 2 Pin Lemo Male to Angled 4 Pin XLR Female Cable, Fisher 6 Pin Male to 4 Pin XLR Male Cable, SMB to BNC x 1 10 x Cable, BNC to BNC: Different length and thickness cables Extra cables HDMI Cables with the (cameraessentials.com) cable pouch CASE F: Wireless Case: BucketBoss Bag: BFD Bartech Wireless Follow Focus with HPRC 2250 case: Bartech Transmitter (hand unit) Bartech Receiver/amplifier Heden Digital Servo Motor M-1 Motor bracket Pouch with the 5 snap-on gears for the Heden Motor: Modules 1, 0.8, 0.6, 0.5, 0.4 Pouch with the Inserts for the Heden Motor: For 19/15mm and 5/8’ rods Pouch with the Bartech Receiver Power Cables to Camera or Stabilizer: 3005 2pin lemo BFD Receiver to EFP/PRO/IIIA Stabilizer 4-pin Power Cable 3040 2pin lemo BFD Receiver to ARRI 11-pin (BL/SR/35-II)I Power Cable 3035 A/B PTap to 2pin lemo BFD 12V Pouch with the Bartech Camera Run/Stop cables: 5010 BFD Receiver to RED One 6023 BFD Receiver to Panavision Pouch with the miscellaneous cables: Bartech Receiver to Motor cables: 6112 M-One, Heden ''P'' 5pin, SLD-100 Bartech PRO Sled to BFD Receiver Mounting Bracket extra antenna Bartech Gimbal mount hard wire focus module (plugs directly into receiver module) Remote Focus Rain Cover(cameraessentials.com) Clip-On Neck Strap Teradek Bolt 930 Pro 300 TX/RX SDI/HDMI Wireless Video set with HPRC 2220 case: Bolt Pro 300 Transmitter Bolt Pro 300 Receiver 3x BIT 118 2pin Lemo to PTap 18in Cable Power cable 2x BNC short cable 2x Noga Arms Odyssey 7 Convergent Design Directors Monitor with HPRC 2250 case: Odyssey 7 Convergent Design monitor S/N: 21-00157 with Nebtek IDX V-mount battery plate Nebtek hand hold mount for the Odyssey 7 monitor with 2 bolts Nebtek table/c-stand mount and for the Odyssey 7 monitor with 2 bolts Nebtek sun hood for the Odyssey 7 monitor with 2 bolts AC Charger for the Odyssey 7 monitor Oddysey 7 monitor cable to Lemo 3 pin cable (to use on Archer sled instead of HD Marshall monitor) Seconic pouch holder: 2 x Convergent Design Premium SSD Media 256GB card Convergent Design Kwi Card Reader for Premium SSD Media card with USB cable Steadicam Cart: Inovativ Scout 37 Cart Size Inovativ Steadicam System for Scout 37 Inovativ Scout 37 Cart Travel Bag Bungee Cords Steadicam Level Extras: Steadicam camera cage: Weight cage-one 11lb plate; one 6.5lb plate; 4 8.5" rods and accompanying screws to make a cage Archer Thermodyne Case (could fit the whole rig, vest, arm and extra accessories when need to travel with few cases) 7" 700 NIT LCD composite monitor Director’s monitor analog transmitter/receiver case: Modulus SD Video Link Rx with antenna and power cable TFL SD Video Monitor with build inTx and battery plate and AC power cable and D-Tap power cable Steadicam SD Video Monitor The kit is valued at $70K. I’m ready to sell it for the $45K firm, local pickup in Los Angeles is preferable. All the detailed pictures can be found through this dropbox link, too many pictures to fit in this post: https://www.dropbox.com/sh/v64znba33uuvo3q/AAAiY7M5QQ5UUPi7616qCSaha?dl=0 If interested, PM Me at katy.mostfilms@gmail.com

SOLD

SOLD

Hi Brant, Are you still sell the Antlers?

Looking for a full set of Antlers. Please email me to katy.mostfilms@gmail.com Thanks, Katy

Archer 2 Docking bracket Standard docking bracket with 2 balancing posts (one for static, another for dynamic spin balancing). $350 USPS Priority Mail with insurance or local Los Angeles pickup. If interested please email to mostcams@gmail.com Thanks! Katy