Kieran Steele

Sold!

SOLD! :)

I had a member ask me about weight capacity. 2nd gen flyer black arm is 15lbs. I'd read stripped down red about 18lbs is about it. This looks like more : http://www.steadi-onfilms.com.au/steadicam_flyer.html And I recall reading about some mods for the top plate screws or something to make sure it can take even a bit more. What are members experiences with weight and this rig? What's the heaviest you've flown it without feeling like you are going to break it? Cheers

Now up for sale http://www.steadicamforum.com/index.php?showtopic=21986&do=findComment&comment=108551

Located in Canberra, Australia. USD $600 (which at the moment is AUD $768) ono + shipping Let me know your shipping postcode/zipcode with a PM and I can calculate shipping. Here are the hi-res photos. The shortest post is the one I had mounted and has slight surface rust. The other two posts are clean as. And slightest rust inside the main piece and screws. Fully functional. I've used them about 3 times since 2007. Hi-res photos here. https://www.hightail.com/download/UlRSMFhxeFg0b0RxYk1UQw Cheers, Kieran

It is indeed now Sold. Thankyou all for your interest.

Turns out my operating is way better than my novice effort at chroma key :) Think I'll leave the photos alone. Located in Canberra Australia. Exceptional condition flyer. Original only owner. Only used about 10-12 times, kept in its softcase inside. Thought of frequently... Not used enough to justify keeping it (though I've talked myself out of it for years). Totevision 703HD monitor mounted, and original SD monitor fully functional included (which has slight surface mark on right edge). I have threaded a compoent cable (flat 3 way) up through the post alongside the original composite cable, happy to remove or leave. The totevision I am pretty sure either the vga/dvi or both do not function, I've only used the composite/component anyway. The mount where it screws on has some slight bending, I've never bothered to bend it back, seems solid, flown with it a few times. Comes with remote, screen is a1 condition. Arm in sterling condition. One slight chipping of paint in the middle. Vest in excellent condition. Still smells new. I've stuffed some gaff in the clips as right from the first time I used it I noticed them making some noise as I moved. I presume it was common for the model, never did anything about it, works fine. Socket block thumbscrews have unusual amount of surface rust compared to every other piece. Functional, easily replaced. Anton Bauer battery mounts, 1 vlock conversion mount included. Bottom of the ab mount has a small piece of white velco I used for a DIY rain cover. Can be removed. No batteries included (sold the ABs with last camera, keeping the vlocks for current). If you wish some dead weight old stackable vlocks, you can have 2 dead ones included for their shipping weight (they may be able to be refreshed if anywhere still does that). Original power lemo, bnc thin cable, and thin composite cable included. 3 long allen keys in good condition. Black stand, and stand top, great condition Soft case, great condition Top plate, great condition. The mini holding screw and the 3/8th screw have burring. They are currently functional, but could do with replacing. Who could forget the NTSC and PAL training videos! I am not sure I ever had a VHS even when I bought it. Both included for nostalgia. Shpping weight is 45lbs / 20kgs in the softcase dimensions. Happy to field any questions. I am looking for a quick sale now that I have finally brought myself to sell it. Otherwise I'll slip back to keeping it :) USD $2950 ono. (currently AUD$3775) Hi res photos here (and many of them). Low res below. https://www.hightail.com/download/UlRSMFh0OW51Yk1FSzhUQw Cheers, Kieran

Hi fellow flyers. Selling Tiffen Vehicle mount. Like new condition, only been used a few times. This model comes with the socket block and a mount and wooden base. If you wish due to shipping weight/charges to USA happy to ditch the base and wood, but won't be dropping the price. The base and wood has been very handy when I have used it. This unit is located in Canberra, Australia. USD $400 plus shipping. Currently AUD $500 plus shipping. Let me know how quick you want it and your postcode/zipcode so I can calculate shipping for you. Hi res photos here. Low res attached. https://www.hightail.com/download/UlRSMFhxeFg0b0RxYk1UQw Cheers, Kieran

I have a 2nd hand cam-tech lowmode cage for sale. I actually use this for small cameras (including a7s recently) and big camera's for low mode as its vertically extendable. Breaks down flat when needed for travel. http://shop.strato.de/epages/61417979.sf/en_US/?ObjectPath=/Shops/61417979/Products/%22Low-Mode%20Cage%22

Hi Luke, I am selling a Stedicam Flyer in excellent condition, I'm in Canberra Australia. Pm me for details, or let me know if you got one already. Cheers, Kieran

I have a set for sale, great condition. However I am in Canberra Australia, not sure about shipping. Shouldn't be terrible. Let me know if you found a set stateside.