Jump to content

Rich Kickbush

Sustaining Members
  • Content Count

    3
  • Joined

  • Last visited

Community Reputation

2 Neutral

About Rich Kickbush

  • Rank
    New Member

Profile Information

  • Rig
    Hybrid

Contact Methods

  • Website
    http://
  • ICQ
    0

Recent Profile Visitors

2025 profile views
  1. Hi Adi, different feel to a PRO or Tiffen, you feel that the weight is connected at the front obviously, but the rigidity of the Klassen vest means its still distributed evenly and into the back/hips. Only downside is that you can't change the socket height easily, but I do remember seeing a riser block on someone's GB vest as more permanent height mod. I think its real advantage is to quickly switch on set to a much narrower body profile for tight spaces, without having to change out to a completely different vest. You do need to reverse the socket block on your arm tho, easy with an aircraft pin fitting. Rich
  2. Front and back mount in the same vest. If you're not familiar with this design, it was made at the request of Garrett, who liked the support but wanted to keep the front mount option. I'm 5'11, 190lbs 34-36In waist, and it fits well, could fit someone bigger or smaller fine also - I used to run the bladder only a little inflated. Leather and sockets still in very good condition. Comes with standard arm and vest bags from Klassen, and spares kit pictured. Located in Australia but no problem to ship worldwide. $3800 USD or the equivalent in your currency. Email is richkick@gmail.com
  3. Selling a Hybrid GPI PRO sled. Ideal for backup / lightweight running rig / 1st sled. GPI Donkey Box 1. In great condition. Single short plate included. GPI 1.5" Post with SD Electronics. HD cable included, ready for upgrade - (I didn't get around to it). Base is Gen 2 PRO Bayonet. Jerry Hill Anton Bauer 12V/24V Battery Base - voltage readout/SD video distribution/walking light/recorder output. Wired for 8 pin monitor out. Marell DIgital level for SD - wired for 8 pin in/out. 24" 8pin-8pin cable. #Spare Jerry Hill Base with additional voltmeter. Both bases work fine. 2nd one is a backup for the field that I've never needed to go to. SD on board recorder x2 kit - AV500 Decimator HD-SD converter (not pictured) PRO to 4 pin XLR power out included Basic monitor mount included - I also have a CamJam Quattro available in a separate listing. No gimbal - selling XCS gimbal available separately. Note - Gorelock available separately Looking to sell as a complete sled at this point. US$4500 + shipping.
  4. Price drop - $5K. Open to reasonable offers, and selling handles individually if a buyer doesn't want both.
  5. XCS Ultimate Gimbal in excellent condition, with both Ergo (conventional, non-goofy) handle and regular handle options. 1.5" sleeve - but that can be changed out for other sizes up to 2" Includes service/cleaning tool kit with instructions. (if you ever need it) $6K USD OBO
  6. Hi Brad, I have a Klassen vehicle mount I may be selling. Would that work for you?
  7. HANDSET AND MOTORS - 2 channel Bartech Handset with Iris slider 2x Digital fSTOP 2.1 Bartech receiver with short 90 degree antennas. 2x Heden M21VE-L Digital motors with 0.4, 0.5, 0.6, 0.8 Gears CABLES - MOTOR 3 x 7pin digital motor cables (2+1 backup) POWER CABLES 1 x 3pin Arri power 1 x D-tap power 1 x PRO power cable RUN/STOP CABLES - 1 x Arri 3 pin 1x RED Epic 1x C300 2x Panavision with 24V inline Regulator power/run stop 2x Arri 11pin Fischer power/run stop ACCESSORIES - 3x Aluminium Handset rings 3x Plastic Handset markup strips Spare 900Mhz antennas - 2x short straight 2x short 90 degree 2x long range 1x Stubby handset $5700 OBO Email for more info and photos cameraworksvr@gmail.com
  8. Has anyone got one of these kicking around? Cheers
  9. Heden M21VE-L, the later model with the higher torque. Pristene, never used, comes with standard 32P 0.8 gear. $1500 OBO
  10. 2 channel Bartech Handset with Iris slider 2x Digital fSTOP 2.1 Bartech receiver with short 90 degree antennas. 2x Heden M21VE-L Digital motors with 0.4, 0.5, 0.6, 0.8 Gears Cables - 2 x 7pin digital motor cables 1 x 3pin Arri power 1 x D-tap power Run/stop - 1 x Arri 3 pin 1x RED Epic 1x C300 2x Panavision with 24V inline Regulator power/run stop 2x Arri 11pin Fischer power/run stop PRO power cable 3x Aluminium Handset rings 3x Plastic Handset markup strips Spare 900Mhz antennas - 2x short straight 2x short 90 degree 2x long range 1x Stubby handset Around US$11K new US$6500 not including your choice of shipping. Pics to follow.
  11. Would anyone have either a focus or iris transmitter only that they are wanting to part with? Cheers Rich Richkick@gmail.com
  12. Including shark fin antenna for the same price - Modulus 3000/NTSC Hermes/Shark Fin - $550
×
×
  • Create New...