Jump to content

CristinaLoyola

Members
 View Profile  See their activity

  • Posts

    7

  • Joined

  • Last visited

Reputation

0 Neutral

Profile Information

  • Rig
    Scout
  1. CristinaLoyola
    Hi people, thank you so much for all the feedback! The solution was simple after all. I connceted the C100 to the Scout's monitor, using the AV OUT (C100) to the CVBS (Scout monitor), as you all suggested. Thanks again.
  2. CristinaLoyola
    I was thinking the same but it never harms to get an extra opinion. Thanks Shawn!
  3. CristinaLoyola
    Hey good people, need help making a decision. OK, I have the Canon C100 and I want to connect it with the sled of the Scout. The sled has a BNC connection whereas the C100 has an HDMI; so I'm looking for an HDMI to SDI converter. I'm between the Atomos: H2S & AJA: HA5 Small Comparison on the features I'm considering: Powering-Up AJA: can be powered straight from the Sled (w/ extra accesorry-if I'm not mistaken) Atomos: Has internal battery & takes external Sony batteries (one is included) Mounting AJA: not sure Atomos: attaches to my Atomos Ninja 2 (w/ not extra cables) which i'll be using with the Scout Extra Uses/Attributes AJA: can embed audio Atomos: very small & has a flashlight mode for dark places Price The Atomos is around £70/$120 cheape than the AJA, depending where you look. Did I leave anything important out that I should consider? All opinions welcome!
  4. CristinaLoyola
    Hi Frederic, once again thank you for your input! Much appreciated! I finally figured out the problem - why the monitor wasn't powering up. I was missing a small cable - that connects with the 12V power cable and has a male mini XLR on the other end. The male mini XLR connects straight to the monitor's female mini XLR connection. As for connecting the C100 with the Steadicam I'll do a good research along the lines of a HDMI to SDI converter, as you suggested. Thank you so much for the help Frederic and Victor :)
  5. CristinaLoyola
    Victor, thank you for helping yout. I'm based in the Uk - if a solution can't be found I'll call them up here and ask them. Also, the monitor has an HDMI input - it should work with the C100 shouldn't it (when its powered up ofcourse) ?
  6. CristinaLoyola
    Hi Frederic, Thank you for your very quick reply. I've posted two photos of the wired cables that run through the post, and one photo of the monitor's connections. What I am I missing here? I've got the Canon C100 do you know by any chance what cables i might need to connnect it with the topstage?
  7. CristinaLoyola
    Hey everyone, I am a new member in this forum and I recently bought a new Scout steadicam. Please excuse my ignorance but can you tell how to power up the Scout monitor? Do I have to buy any additional wires or is the cable included? Within the package there is a 12V cable (which is also wired through the post) but it cannot seem to fit onto any of the monitors connections. Any help will be much appreciated! Thank you.
×
×
  • Create New...