Andrew Bradley

price drop - £4350

Price drop £4400

price drop - £4500

Price drop £450

Price drop £500

price drop - £4550

Price drop £600

price drop - £4700

price drop - £4800

On 11/2/2019 at 10:45 AM, Vladimir Peeters SOA said:

can you tell me which radio this is ? you know the things compatible with ARRI cameras ...

ARRI is GREEN / YELLOW / WHITE radio

 

also need to know the software version of all items: Handunit, Camin, C/zoom

if you don't know, ask C-Motion with your serial number they could easily tell you 

sorry only just seen your question, this handset requires the camin brain. C motion do do an upgrade for the handset to make it compatible with the mini last I heard. Cut/run 3pin rs of course works with all arris.

price drop - £4850

price drop £650

sold

ASKING £800 ono

5.6" TV Logic Kit

1 x Peli Case 1400

1 x 5.6" TV Logic Manual

1 x 5.6" TV Logic Monitor + Screen Protector

1 x Medium Noga Arm + 3/8 Step Thread

2 x DTap to Mini XLR
1 x 2pinRS to Mini XLR
1 x 4 pin XLR to Mini XLR

2 x BNC (60cm ish)

1 x Mains Power + Kettle Lead

1 x basic vlock plate, Dtap

small scratch on screen protector and one of the corners chipped. (ACTUAL screen is perfect)

 

UK (London/Portsmouth)

Price drop - £680 ono

used once to test been kept in storage ever since.

Price drop - Asking £5000 

FOR SALE

Cmotion Cvolution complete kit (Focus, Iris and Zoom)

All in great working order

1 x Black Peli Case 1550

2 x Heden Motors M21VE 0.8 gears (*2572/2482)

1 x Heden Motor M26VE *0.6 gear (52768)

3 x 15mm Step Downs

5 x White Blank Focus Discs

1 x Cmotion Cvolution Control Unit (0115)

1 x Zoom Module (0157)

1 x Camin Brain (0401) + 1 x Mount/Q-Release

2 x Aerials

1 x Allen Key 5/32 Imperial (to attach zoom to handset)

3 x BP-915 Batteries 7.4v

1 x Canon Charger CA-920 + Lead

2 x L to straight Motor Cables

1 x Straight to straight Motor Cable

2 x 3 pin RS to 3 pin RS (Both power + run for arri cameras film/digital)

1 x 3 pin RS to Dtap

1 x 16 pin RUN Cable to BNC + Barrel (RED run cable)

1 x Ext Hardwire Cable for zoom module

1 x Speedy Clamp + 1/4 to 3/8 Step Down + 1/4 to 1/4 (to mount zoom module on head pan bar)

2 x EU 19 Motor Offset Brackets + 15mm Rods

1 x Neck Strap

*Motor 2572 missing screw but does not cause an issue

*0.6 Cog needs swapping out (not sure what 0.6 is for, eng lenses perhaps? but most lenses are 0.8 or PV iris is 0.4 so would need switching to use on cinema lenses)

washer and screw taped inside box to aid in tightening speedy clamp when attaching zoom to a pan bar like a microforce but I have not needed to use it so far.

Asking £5300 

Thanks

Message me on here or please email me at (andrewbradley@live.com)
kit location Portsmouth/London UK

Selling this battery charger which was always a spare, bought new as part of a kit from Tiffen, Pinewood back in 2016. I used it one time when I took it out of the box and since then it has been stored. All manuals, cables and charger still has protective stickers in place.

The VL-4S is a fully simultaneous 4-channel charger, housed in a high-impact, polycarbonate enclosure with a recessed power switch and carrying handle.  Quick and powerful charging make the VL-4S the perfect choice for broadcast and production facilities with a high battery usage. Each channel is operated independently so batteries can be placed on charge in any order and at any time.

 

Asking £750 ONO

 

Portsmouth, UK. (Can arrange a meeting or drop off in London also)

SOLD.

Mine is for sale. If you are UK based. Could not see on your profile.

Steadicam Ultra Cine Complete Package
£15500 ONO
 

FOR SALE

 

Complete Ultra Series kit all you need package to get started, so great for someone looking for their first rig.

Not had a lot of use in the time I have owned it but well looked after and arm was last serviced at Optical Support.

 

I bought this kit in 2015 and before me it was rental gear owned by ProCam. Apparently last job it went out on was Kickass 2 or so I was told.

The kit comes with lots of cables to power both Arri and Panavision film cameras, and also Arri Alexa. Older RED ONE power cable which could be updated to work with epic/dragon.

 

CASES

·         Large Hard wheelie case for Sled + Monitor

·         Large Hard wheelie case (can fit vest + arm and more)

·         Smaller Hard Case for cables + various bits

·         Wheel case for Arm - Branded Browning 5015 but it is exact same as Peli 1710 (foam is fresh/uncut)

 

SLED

·         Ultra Cine Sled (motorised top stage + wireless remote)

·         4 section Carbon Fibre Composite Telescoping Post with range from 28” to 71” ( 71cm to 180 cm )

·         Upgraded to HDSDI

·         12/24v Battery Mount V-Mount

·         Tilt Head (+ or – 20 degrees from horizontal)

·         Frame line generator (only when in SD)

 

MONITOR

·         8" Ultrabright2 HD Composite Monitor

·         HDSDI to SD down convertor Black Magic Mini (works with all cameras red/alexa/sony etc)

 

ARM + sleeve

·         Ultra Arm 20 – 50lbs 

·         Tool free side to side adjustment

·         3 x arm rods 3” + 6” + 12”

Recently serviced by Optical Support

 

VEST + bag

·         Ultra Vest

·         Titanium Socket Block

IDX VLOCK BATTERIES

·         4 x IDX H10DS Batts (barely used, bought new come with original packaging)

IDX VLOCK BATTERIES

·         6 x IDX HL9 Batts (3 NEED RE-CELLING)

·         1 x 1550 Peli Case

·         1 x Hawkwood Plate dtap/hirose (VL CA2)

·         1 x 4way VL-4S Charger + kettle lead

(so 10 batts in total - 3 need re-celling)

VIDEO CABLES (see pics)

·         Various Lengths of BNC – mostly skinny from a few inches to 6’ long

 

POWER CABLES

·         2 x Arri (1 is 12v and 1 is 24v)

·         1 x 12v 4pin

·         2 x PV

·         1 x RED (red one)

·         1 x unidentified

·         1 x unidentified

 

STANDS

·         Lightweight C-Stand

·         American Stand with 8” Pneumatic Wheels

 

MISCELLANEOUS

Sand Bag

Long Dovetail Plate

Short Dovetail Plate (low mode)

Low Mode Slanted F-Bracket

Arri Alexa Plate

Sony VCT Plate

Brass Weight plate

Small lead dovetail lead weight

4 x Screw, 3/8-16

2 x Screw, ¼ -20

Tiffen Docking Bracket + bag

Stabilizing Vectran Line

4x 15mm rods

 

RAIN COVERS

·         Ultra Arm Protective Covers, Dual Section

·         Ultra Bottom Sled Cover & Battery Protective Covers

 

VEHICLE HARD MOUNT + case

·         Mitchell/MOY base + removable keyway

·         Socket Block + damage to plastic tie nuts, but still works fine

 

WINDKILLER + sleeve

·         Hardly used Sunbounce Pro Windkiller

 

 

I will also include

·         Arri Medium size Bag

·         Various BNC pieces

·         Cable Pouches

·         Blue space blanket

·         Various allen keys + tbar tool

·         Steadicam Operator's Handbook

·         Ultra Series Manual + Brochure

 

And finally my VHS practice camera (see pic mounted on sled) Works great with the brass weight plate and is similar to a full build amira in weight. Recorder works great so you can practice at home and watch back your shots. I have converted the power so it works with regular V-Lock batts and the camera also comes with a case.

 

ASKING £15500.00

Thanks for looking, please contact me on here or direct to andrewbradley@live.com

Thanks

Andrew 

FOR SALE

Cmotion Cvolution complete kit (Focus, Iris and Zoom)

All in great working order

1 x Black Peli Case 1550

2 x Heden Motors M21VE 0.8 gears (*2572/2482)

1 x Heden Motor M26VE *0.6 gear (52768)

3 x 15mm Step Downs

5 x White Blank Focus Discs

1 x Cmotion Cvolution Control Unit (0115)

1 x Zoom Module (0157)

1 x Camin Brain (0401) + 1 x Mount/Q-Release

2 x Aerials

1 x Allen Key 5/32 Imperial (to attach zoom to handset)

3 x BP-915 Batteries 7.4v

1 x Canon Charger CA-920 + Lead

2 x L to straight Motor Cables

1 x Straight to straight Motor Cable

2 x 3 pin RS to 3 pin RS (Both power + run for arri cameras film/digital)

1 x 3 pin RS to Dtap

1 x 16 pin RUN Cable to BNC + Barrel (RED run cable)

1 x Ext Hardwire Cable for zoom module

1 x Speedy Clamp + 1/4 to 3/8 Step Down + 1/4 to 1/4 (to mount zoom module on head pan bar)

2 x EU 19 Motor Offset Brackets + 15mm Rods

1 x Neck Strap

 

*Motor 2572 missing screw but does not cause an issue

*0.6 Cog needs swapping out (not sure what 0.6 is for, eng lenses perhaps? but most lenses are 0.8 or PV iris is 0.4 so would need switching to use on cinema lenses)

washer and screw taped inside box to aid in tightening speedy clamp when attaching zoom to a pan bar like a microforce but I have not needed to use it so far.

 

Asking £5700 

Thanks

Message me on here or please email me at (andrewbradley@live.com)

Price drop £5800

http://www.steadicamforum.com/index.php?showtopic=27695&do=findComment&comment=127657

 

 

Buy my kit:)

FOR SALE

Cmotion Cvolution complete kit (Focus, Iris and Zoom)

All in great working order

1 x Black Peli Case 1550

2 x Heden Motors M21VE 0.8 gears (*2572/2482)

1 x Heden Motor M26VE *0.6 gear (52768)

3 x 15mm Step Downs

5 x White Blank Focus Discs

1 x Cmotion Cvolution Control Unit (0115)

1 x Zoom Module (0157)

1 x Camin Brain (0401) + 1 x Mount/Q-Release

2 x Aerials

1 x Allen Key 5/32 Imperial (to attach zoom to handset)

3 x BP-915 Batteries 7.4v

1 x Canon Charger CA-920 + Lead

2 x L to straight Motor Cables

1 x Straight to straight Motor Cable

2 x 3 pin RS to 3 pin RS (Both power + run for arri cameras film/digital)

1 x 3 pin RS to Dtap

1 x 16 pin RUN Cable to BNC + Barrel (RED run cable)

1 x Ext Hardwire Cable for zoom module

1 x Speedy Clamp + 1/4 to 3/8 Step Down + 1/4 to 1/4 (to mount zoom module on head pan bar)

2 x EU 19 Motor Offset Brackets + 15mm Rods

1 x Neck Strap

*Motor 2572 missing screw but does not cause an issue

*0.6 Cog needs swapping out (not sure what 0.6 is for, eng lenses perhaps? but most lenses are 0.8 or PV iris is 0.4 so would need switching to use on cinema lenses)

washer and screw taped inside box to aid in tightening speedy clamp when attaching zoom to a pan bar like a microforce but I have not needed to use it so far.

Asking £6000 ONO

Thanks

Message me on here or please email me at (andrewbradley@live.com)