Jump to content

Stephen Consentino

Premium Members
  • Posts

    22
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Stephen Consentino

  1. Looking to buy a Preston HU3 handset only. NOT interested in a complete kit. Must have G4 chip/upgraded to G4. Located in NYC area. Please email me at film.maker@me.com Thanks Stephen Consentino
  2. Haris- I have a V2 D-Box and J-Box and coiled post cable for sale. I sent you a private email or email me at film.maker@me.com. Stephen
  3. KS-5 Gyros (x2) with Power Supply Two Ken-Lab KS-5 Gyros with Custom mounts and 12Volt Power Supply. Work well and in good physical condition. Power Supply is 12volts input with a 4-pin XLR connector and capable of powering both gyros. Includes multiple long and short power supply cables. Email me at film.maker@me.com Asking $2,000 OBO.
  4. Ken- I don't have that but I do have a 1.5" Hill docking bracket and collar if it's of interest to you. Thanks Stephen Consentino cell: 914-837-0120 film.maker@me.com
  5. I would be too Chuck. But from their website it looks like it is something better suited for a fixed installation (studio) environment and not so much a quick location setup but I could be wrong. To also respond to Alec about the ability to hear comtek audio on the HME's it is possible in several ways and I have done both. If you have a MB300 base station (most people don't but mine does) you can wire and audio feed into the basestation (e.g. take a comtek receiver and wire out of the headphone jack to the basestation). The other option is to do a similar thing and wire a comtek to an HME belt pack's mic input and then just cue the belt pack on anytime you want to hear that audio. Only drawback is that everyone hears it on their HME and it takes up one of the TX slots available so it can limit the ability of some people to duplex talk on the HME headsets. The third option is to have an audio person of a company like Comtronics make a custom splitter cable for a belt pack that would allow you to hear both feeds in your headset. I know my 1st AC uses a similar splitter on his walkie headset to hear the comtek audio.
  6. So my beloved Rocksteadigear soft sided vest case had its zipper fall apart on the inside. I think they are long out of business. Is that correct? Anyone have another source for such a case or a good option? Would prefer a soft case that I could also put my arm case in also. Thanks Stephen Consentino
  7. FOR SALE Cam-Jam Quattro Universal Monitor Arm with integrated yoke I am selling my Cam-Jam Quattro Universal Monitor Arm with integrated yoke. It is less one year old and looks brand new. It was on my rig that I just sold and my new rig already had one on it so I don’t need this. The Cam-Jam Quattro Universal Monitor Arm is without a doubt the best monitor arm I have ever used. It is rock solid, light-weight and completely vibration free thanks to it’s four point mounting system. It allows you to infinitely adjust your monitor position and instantly go from high to low mode positions all with no change in balance. You can use the arm with almost any monitor from Small HD, Transvideo, Boland, Odyssey, Ikan, Cinetronics, Nebtek or Marshall with the addition of a monitor mount from Cam-Jam (not included here - cost is $50-$100 depending on model). I also have (for an additional $50) an Universal Adapter for backup monitors that allows all monitors with a 1/4”-20 threaded hole on the bottom to be mounted to the Quattro Monitor Arm, not using the yoke. With it’s 2” diameter clamping ring, you can mount the Quattro Arm on most any stage of any Steadicam rig as custom adapter rings are available for any post diameter (I am including one 1.5” and one 1.9” adapter rings). For more info see the Cam-Jam website at: https://shop.cam-jam.de/product/quattro2-monitor-arm-with-yoke/ The price new is 1,230.00 € (about $1,450 US) with the two adapter rings. I am asking $1,100.00 If you are interested PLEASE EMAIL ME DIRECTLY do not post questions here, I don’t check it often enough. Direct emails will get very quick responses. Thanks, Stephen Consentino Email: film.maker@me.com Cell: 914-837-0120
  8. I have a brand new (worn about 5 times) ARRI Artemis vest and a Tiffen G-70 X for sale. Please call or email me. Stephen Consentino email: film.maker@me.com cell: 914-837-0120
  9. MK-V NEXUS V4 SLED / TIFFEN G-70X ARM / ARRI ARTEMIS VEST MK-V NEXUS STEADICAM SLED This is the flagship of the line and MK-V’s newest version of the steadicam sled and includes the following: - 2" Deluxe 4-stage Post capable of being extended for super-low mode or super-high mode shots - Deluxe V4 Gimbal (super smooth) with interchangeable post handles capable of being used with any diameter arm post - D-Box: V4 Dual HD Electronics w/ dual HD Outputs and high power feeds - J-Box: V4 with Dual HD-SDI in/out - Betz Topstage (vibration-free, built-in bubble level) - Sony PVM741 OLED HD Monitor (stunning off-angle viewing with near 180 degree horizontal and vertical viewing angle - V4 Monitor Arm - Monitor Power/Video Cable - 2 x Standard Dovetail plates - 15mm bars and dovetail plate holder - 1 x Dual and 1 x Single battery module with V-lock battery plates (able to easily switch for Anton Bauer) - V4 Docking Station - Full Power cable pack (Arri, Panavision, 12V XLR, 24V XLR power cables) - Pelican 1730 Case MK-V Sled as listed above: Sells for $29,000. ASKING $19,500. ARRI ARTEMIS VEST Brand New. Worn a couple of times. Lists for $5,000. ASKING $3,900. TIFFEN G70-x ARM Beautiful Iso-elastic arm. Includes short post. Looks and feels like new. Just four years old. ASKING $13,000. I am willing to sell the sled, arm and vest separately, but prefer to sell it as a complete package which I will discount to $34,500. This is a $50,000.00+ package that is nearly new. I also have IDX chargers and batteries that I can sell with it as well as a Kenlab Gyro package. This is an amazing ready to go package. You will love it! If you are interested PLEASE EMAIL ME DIRECTLY do not post questions here, I don’t check it often enough. Direct emails will get very quick responses. Thanks, Stephen Consentino Email: film.maker@me.com Cell: 914-837-0120
  10. I have a brand new (used twice) Artemis vest if you are interested. PM me at film.maker@me.com Stephen Consentino
  11. I am an authorized Teradek and Paralinx dealer and would be glad to offer you an excellent deal on a brand new Sidekick version 1. If you are interested please email me at film.maker@me.com. Thanks, Stephen Consentino
  12. Arri Trinity Head & Artemis Steadicam Rig, Vest & Tiffen G70 Arm I am selling a brand new Arri Trinity Rig, Arri Vest and Tiffen G70 Arm. The Trinity is a unique, 5-axis hybrid stabilizer that combines classic mechanical stabilization with advanced gimbal technology, TRINITY is the flagship of the ARRI CSS range that allows for revolutionary new ways of operating. TRINITY is the first hybrid camera stabilizer that combines classic mechanical stabilization with advanced active electronic stabilization, provided via 32-bit ARM-based gimbal technology. This combination results in five axes of control and enables uniquely fluid, wide-ranging, and precisely controlled movements for unrestricted shooting and total creative freedom. New angles for the operator and new storytelling options for the director and cinematographer are possible with TRINITY. By inverting the post, the camera can be moved from low mode to high mode during a shot; using the joystick-controlled, fully stabilized tilt axis to look up or down during this motion is also possible, so a low angle can smoothly transition into an over-the-shoulder shot. By holding the post at 45 degrees and twisting it left or right, the camera can even look around corners, whether in low or high mode. Additional stabilization in the roll axis permits the use of telephoto lenses. Extraordinary new shots, angles, and movements are achievable when TRINITY is used in its fully stabilized mode. For situations that call for a more traditional operating style, TRINITY can be switched into a locked mode in which the tilt axis is connected directly to the post in the traditional manner. This system is just a few months old and has only been used a few days. I have taken a long term position on a TV show, but it is not in the style of this show to use something as unique as the Trinity so I won’t have the opportunity to rent it and therefor I need to sell it. This is a complete package. I have the Trinity head and Artemis rig, plus the Artemis Vest and a Tiffen G70 Arm. I am willing to sell the system without the arm and/or vest. I have custom cases for the gear plus many additional accessories and cables. This is a beautiful package and all ready to work. You will love it! I have attached a list of main components. Please contact me to discuss price. If you are interested, please contact me directly via email or my cell. Please do not leave messages here. Stephen Consentino email: film.maker@me.com cell: 914-837-0120
  13. Paralinx Tomahawk Deluxe 1:2 HD Video Transmitter Package I have a used (but in excellent condition) Paralinx Tomahawk Deluxe 1:2 Package. It contains one Tomahawk SDI transmitter, two SDI Receivers (Anton Bauer plates), one Array antenna and all of the following: 1 x Paralinx Tomahawk transmitter (SDI or HDMI) 2 x Paralinx Tomahawk receivers 3 x 18" PTap to 2-pin connector power cables (45cm) 1 x 24" 2-pin connector to 2-pin connector Cable (60cm) 2 x 18" Right-Angle to Right-Angle BNC Cables (45cm) 1 x Paralinx Sidearm transmitter mounting bracket 2 x Paralinx Perch receiver mounting brackets 1 x Paralinx Array MIMO panel antenna for receiver (Gold-Mount or V-Mount) 5 x Type-N to RP-SMA Cables for use with Array 2 x Battery Plate (female) for powering each receiver (Gold-Mount or V-Mount) 2 x Battery Plate (male) for mounting Array to receiver (Gold-Mount or V-Mount) 2 x Standard 5dbi Antennas for transmitter 10 x Standard 2dbi Antennas for receivers 2 x AC Adapters for receivers 1 x Mini-USB to USB Cable (for future firmware updates) 1 x Custom Pelican 1550 Case (can hold up to 2 Tx, 3 Rx, 2 Arrays, accessories) The list price is $12,700.00. I am asking $8,500.00. The system is in perfect working condition and in near new condition. You will be very happy with this system. Please email me directly if you are interested. Please don’t leave messages here. Stephen Consentino email: film.maker@me.com
  14. EasyRig Cinema 3 For Sale In excellent condition - all straps are clean, no excessive wear, all paint is very clean and the main cable is in perfect condition. This is the heaviest duty of the Easyrig systems and is perfect for use with any of the gimbal systems (Ronins, Moves, etc.) and is great for any handheld camera uses. The package includes: EasyRig Cinema 3 Vest EasyRig Arm (130mm length) with 850N spring (for payloads 32-55lbs) EasyRig Soft case with shoulder strap Retails for $3,900.00. Selling for $2,600. Please email me only, do not reply or leave messages here. Stephen Consentino email: film.maker@me.com
  15. Complete Preston FIZ System w/ HU-3 & MDR-2 for Sale A Complete itemized list and photos below, but highlights are: - MDR-2 G4 with latest firmware installed (3-channel Motor Driver) - HU-3 G4 with latest firmware installed - 3 batteries and 2 chargers - Three (3) DM-2 Digital Motors - PAM Brackets and Arms for all motors - Complete set of all motor cables, run/start cables, power cables - Beautiful custom Pelican hard case This is a complete three channel Preston FIZ system in beautiful condition with the latest firmware and updates. Most importantly it sells with three DM-2 Motors - critical because many used systems for sale come with DM-1 motors which are obsolete and no longer serviced by Preston. This is a fantastic system. It was my personal system for my steadicam. An identical new system would go for $27,400. Asking $19,500. For fastest response, please contact me directly (do not post here): Stephen Consentino film.maker@me.com
×
×
  • Create New...