Jump to content

Tyler Davis

Premium Members
  • Posts

    26
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Tyler Davis

  1. Selling my drop down block because I now have a pro vest with iBaird bracket. $550 includes free shipping to anywhere in the US
  2. bump! now $1500 with free domestic shipping anywhere in the US
  3. still available, new price $1500 (shipping not included)
  4. maybe a spare dovetail plate too, both compatible with M2 sled DM or email tylerwdavis@me.com
  5. looking for one or both email tylerwdavis@me.com
  6. $1500 plus shipping 2x curly SDI cables 1x 2 pin to dtap 1x 2 pin to AC power 2x mushroom antennas hard case I've had this since 2019 and it's never let me down. just updated the firmware to the latest version too
  7. This vest came with my M2 core kit in January, only worn for one job and a few practices runs around the house. Includes bag $2000 plus shipping
  8. for future reference, this is what I ended up getting: M2 sled with 1.75" post, volt, 703 monitor, 2x 98wh core gold mount batteries 19.5 lbs
  9. Walter Klassen hard mount with doughty clamp for light rigs. Bought for a job that never happened in 2018 - been sitting in the case since then. $500 free US shipping email tylerwdavis@me.com
  10. selling my Zephyr kit now that I have upgraded. It has served me well for the past few years - a very capable lightweight rig with all these accessories. Happy to take more photos if needed. $7500, buyer pays shipping and payment fees. Located in Baltimore, MD. No international offers please. Kit includes everything standard from Tiffen plus: Low mode bracket Walter Klassen hard mount with doughty clamp Peter Abraham long plate (bottom is not anodized due to a rush order on my part) 2nd AB battery plate (12v only) by Jerry Holway Universal monitor yoke also by Jerry, I used it with a 703 Camera power cables: Red 4-pin, 2x Arri (one straight, one right angle), 4 pin XLR Other cables: Hirose to 2-pin for a 703 monitor, 4x d-tap splitter Batteries and monitor not included. Email tylerwdavis@me.com
  11. I'm looking at the new core M2 kit that Tiffen is selling, but I want to make sure the G-50x arm will be enough for me. Does anyone know the weight of an M2 sled with volt?
  12. looking for an additional battery plate for my Zephyr sled, my old one recently broke during travel Part 807-7350-02 steadicam_807_7350_02_small_dovetail_ab_battery_1341925528_875137.jpg.webp
  13. Hey Matt, same thing happened to me a few years ago. I was able to separate the vest center plate and mail it in a small box to Tiffen for repair. They need to press it back into place, annoying but at least it was a free repair with no questions asked.
  14. My Zephyr vest is getting a little too worn-in and I'd like to replace or upgrade the pads. Would love some recommendations for manufacturers or even raw materials to make my own. Just bought a brand new easyrig vario 5 and was blown away by how comfortable that vest is. Easylock waistband is also very familiar haha I'd love to have that level of comfort and support on my trusty ol' Zephyr rig!
  15. I've asked around, and I believe the root of my problem is the power cable inside of the Zephyr sled is too small - can anyone confirm? Here's the situation - occasionally I fly my Amira on my Zephyr, and I power camera solely through a 3-pin to 8-pin lemo cable to reduce weight. I have two battery plates on my sled (one made by the excellent Jerry Holway!), but when I run two brand new full batteries, Amira only sees about 16v. I get a 12.5v warning when batteries are around 50% capacity. From what I've gathered, the Zephyr sled wiring is probably too thin to deliver a constant 24v to camera. I'm well aware on the limitations the Zephyr has and that I'm definitely pushing the limits with an Amira package, but I'm curious if anyone has a concrete answer (or workaround) for me
  16. Steadicam AERO 30 Stabilizer with A-30 Arm & V-Mount Battery Mount - Baltimore MD This kit includes everything except a monitor - I always place my smallHD 703 on the sled. IMO the Aero stock monitors are almost useless when it comes to viewing angles and contrast. The sled, arm, and accessories fit nicely into a Pelican iM2950 case. I also have a Steadicam padded duffel bag for the vest and dock. It's possible to fit the everything in the iM2950, but I haven't needed to condense it all in one case yet. I will include both the Pelican case and Steadicam bag unless shipping becomes an outrageous cost. I recently sent the bridge plate to Tiffen for repair - the spring loaded locking pin fell out of the arm block which apparently is a common issue on a lot of Zephyr vests. Now that everything is in working order, the kit is ready to be sold. $4000 shipped anywhere in continental US PM or email tylerwdavis@me.com Includes: Steadicam Aero Sled with V-Mount battery plate and no monitor (1/4" 20 thread mount) Aero 30 Arm Zephyr Vest Dock Quick release plate + screws 8x weights Low mode bracket ($450 value) Pelican iM2950 + Steadicam vest bag Pictures here: https://www.dropbox.com/sh/0sk5s7e7z...nd5t2rq9a?dl=0 Also available on eBay, higher list price due to eBay's processing fees: https://www.ebay.com/itm/113872593770?ul_noapp=true
  17. ok awesome, thanks. hopefully tiffen gets back to me soon
  18. perhaps i'm missing something on the back end too?
×
×
  • Create New...