Jump to content

Bryan Trieb SOC

Premium Members
  • Posts

    163
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Bryan Trieb SOC

  1. Always wear full blacks...so you blend with as much of the background and can stay hidden in the shadows as much as possible. That screaming white t shirt makes you stand out and more easily seen by other cameras which is a big no no.
  2. -XCS Ulitmate 2 Sled with SMPTE upgrade ($1500USD performed by Greg Bubb) Sled also wired to accommodate full broadcast build with 2pin lemo tally pass-thru on top stage and LEH. 19" to 32" 2" post length 2x HDSDI video lines 1x Analogue video input which outputs to 8pin power/video, BNC, and 4pin lemo 12V/video on the LEH (lower housing) -XCS Monitor Bracket -XCS Sliding LT dovetail plate -XCS Spare bits kit Including gimbal tool, screws, Kipps, and LEH balance adjustment rods. -Transvideo Cinemonitor HD6 with 8pin power cable -CamJam monitor bracket/Yolk -2pin XCS to 4pin female XLR camera power cable -Silver Anvil Case $16000.00 USD Buyer Pays Shipping OPTIONAL Broadcast kit: G-zoom zoom/focus unit with Fuji adapter. Stanton Focus Motor kit 2x BFD units to power Stanton Motor including Xcs to BFD cable. 2x analogue return monitors 1x 5"SDI return monitor with bracket 1x 7" SDI return monitor or also can be used as a Prompter Monitor Broadcast Kit: Add $1500.00 USD Kit is located in Toronto, Canada IMG_7110.heic IMG_7111.heic IMG_7112.heic IMG_7113.heic IMG_7115.heic IMG_7116.heic IMG_7118.heic IMG_7119.heic IMG_7120.heic IMG_7121.heic IMG_7123.heic IMG_7126.heic IMG_7127 2.heic IMG_7128.heic IMG_7131 2.heic IMG_7132.heic IMG_7133 2.heic IMG_7137.heic IMG_7138.heic IMG_7139.heic IMG_7140.heic IMG_7141.heic IMG_7142.heic IMG_7143.heic IMG_7144.heic IMG_7145.heic IMG_7146.heic IMG_7147.heic IMG_7148.heic IMG_7149.heic IMG_7151.heic IMG_7153.heic IMG_7154.heic IMG_7155.heic IMG_7156 2.heic IMG_7157 2.heic IMG_7159.heic IMG_7164.heic IMG_7109.heic IMG_7107.heic IMG_7106.heic IMG_7105.heic IMG_7104.heic IMG_7102.heic IMG_7100.heic IMG_7099.heic
  3. Rare and awesome collapsable “Murphy” steadicam cart. Small footprint. Very Sturdy. Breaks down and has a lid for storage/shipping. Prefer local LA pickup. $1500.00 USD cash. If interested please email: trieb@me.com
  4. I would recommend the X1 arm over the Tiffen arm. I personally know a few operators who's G series arms have popped on set and been rendered useless. The quality of components and the assembly of the Tiffen arms done overseas has lead to some issues. I know some top operators who've been using the X1 for a little while now and are all very happy. I demoed one the other day and it was great. Also light and slim profile. Having said that I'm still a Pro arm user and won't be giving that up.
  5. Most Operators in North America use either a Stanton zoom/focus unit, or a Gzoom. Pros and cons to both. Whichever you choose, it's best to get 2 of the same units in case you have failure on set.
  6. I receive replies from John Battiloro who's their USA rep when I ask questions about their 2" volt gimbal. Maybe reach out to him on FB messenger, that's how I've been communicating with him. As far as I know MKV only reopened 3weeks ago.
  7. I've never flown a Betz or a DBIII. What I find interesting are the different opinions on how "solid" different ops describe the Betz. Some say it's super solid, and zero vibration, while others describe it as the opposite. If some operators are experiencing vibration what advice would you give to troubleshoot it?
  8. This is pretty awesome. Love the execution. Just curious...what if your wave stops working and needs service? Do you have another top stage to swap into the mix?
  9. Hi! I would stay away from these lower end products. It will cause you frustration and you'll want to get rid of it quickly. Best to stick to the main brands, even if they are older units that can be serviced/upgraded by the same manufactures who are still in business today.
  10. I think most of us insure the gear for full replacement value, whether it's used gear or new. If your kit gets stolen or damaged you will want to be able to order new components as fast as possible to keep working.
  11. I owned a Master Sled, and still own the arm as backup. The arm is decent. The reality you must face, and be honest with yourself about, is are you prepared to put a lot of work and money into upgrading the sled? I've seen some nice looking upgrades that pretty much re-do the entire sled, but at that point are you really saving much money compared to getting into a lightly used PRO sled for example? The Master is not modular. Top stage has way too much potential to come loose and cause all sorts of problems. It was a good gimbal but if it needs service you can't simply remove it from the sled. I realize many are trying to get into the steadicam craft on a ridiculously low budget compared to investing in top gear brand new and creating a relationship with the manufacturer....but personally...I'd recommend staying away from all these older CP/Tiffen products as your primary sled. You WILL have headaches.
  12. Haha Mr Fowler! I consider the XCS Ultimate 2HD (and soon the Ultimate 3) to be the RR, despite the masses adopting the Volt on their Tiffen and Pro sleds.
  13. Any updates to share about this twitching? I demo’d the Volt at Cinegear again. The Tiffen rep mentioned this might happen if the side to side adjustment on the top stage was off a little. Any feedback about this comment? Also there were comments about the Volt box, if it’s not mounted properly with zero vibration possibilities it can also affect the performance consistency.
  14. Most likely the Potentiometer needs replacing. Many of us have sent our M1 motors to Peter Hoare in the UK......pete.hoare@gmail.com
  15. Looking for an XCS Superpost ideally within USA. Email me: Trieb@me.com Thanks!
  16. Mint Condition Preston Kit Never Sub rented, lightly used only with Steadicam, kept in amazing condition. Anyone who knows me can vouch for the condition in which I keep all my gear. Kit includes: 1. HU3 serial #1909 2. F/I unit serial #1623 3. MDR-2 serial #2387 4. DM1-X Motor serial #3513 5. DM2 Motor serial #5183 6. Jerry Hill PAM motor brackets x3 7. Small single battery chargers x2 8. Sony NP-QM71D Batteries x2 NP-FM50 Batteries x5 9. HU3 pre-marked focus rings x6 (Ai, Bi, Ci, Di, Ei, 1 blank) 10. F/I unit focus rings. Blank x2 11. Red rod collars (19-5/8) x2 12. Blue rod collars (19-15) x2 13. Padded neck strap for HU3 14. MDR-2 mounting brackets x2 (One for 19/15mm rod, one for 1/4-20) 15. Preston Motor gear pitch x5 (64, .50M canon video, 48, .60) 16. Preston Motor cables 2ft, 2x90deg connectors x2 17. Preston Motor cables 2ft 1x90deg connector x2 18. Run/Stop cables- Arri 2ft - Sony F55 2ft - Red Epic (bnc version) 19. MDR-2 power cable from ARRI body 20. MDR-2 power cable to male P-tap 21. P-tap male to P-tap female 2ft 22. ARRI body iris rod mount 2 19mm 23. Jerry Hill PAM extender bracket 24. Cinetape cable $$$$ 25. Cable wallet for all cables 26. Pelican Storm iM2720 case with custom insert by Innerspace Kit is currently in Toronto, Canada. All firmware updates done by Phil Cremer in Toronto MDR-2 upgrade to Blue Dot can be done by Phil Cremer before shipping. Not breaking up the kit. To be sold as a complete package. Buyer pays Shipping $15 500.00 USD Email: steadi.og@gmail.com
  17. Please contact me if you have one you'd like to sell: trieb@me.com Thanks!
  18. Bump... This kit is still available, located in Vancouver, Canada. Price Reduced to $30K USD Please email the seller directly: Dale Johannesen dale.johannesen@icloud.com
  19. Posting for a friend who's retiring from Operating. This kit has everything needed and then some to start working on Live Broadcast immediately, has been with the original owner since purchased new and has been kept in excellent condition. Never rented, light use, G70 recently serviced/cleaned by Tiffen, all cables run through the post for a clean Live setup: Clipper 312(12V) Sled 8.4 HD Monitor 3.5"Program Return Monitor 7" CK 700 w/Anton Bauer plate backup monitor Teleprompter Monitor G70 Arm Tiffen Vest Gzoom plus spare cables Plus spare zoom control 4 Anton Bauer Dionic 90 Batts Anton Bauer Charger Tally System 2 Mohawk Fibre (SMPTE) jumper cables Triax to BNC cable adapters Various necessary (and backup) cables and tools. C Stand Monopod $35 000.00 USD Please email owner directly with any questions: Dale Johannesen dale.johannesen@icloud.com The kit is in Vancouver, Canada
×
×
  • Create New...