Grayson Austin

Price reductions on the last of the Vaxis Storm 3000 wireless systems: 1:1 Vaxis Storm 3000 w/ standard receiver. Now selling for $1000. 1:1 Vaxis Storm 3000 w/ Anton Bauer Pass Through Receiver. Now selling for $1500. Buy either with the as new/unused Cine8 Vaxis 3000 Monitor/Receiver for an even better deal. Email to: graysonaustin@me.com

Tiffen M2 Monitor Bracket for sale: I’m selling an M2 Monitor Bracket sized for 1.58 centerpost. Comes with adapter for lower post as well and a bracket for level sensor or other accessory and two of Jerry Holway’s awesome cable management clips that screw onto the rod ends (value: priceless). Has never been used. In as new condition. Monitor yoke is fully adjustable for different sized monitors with tool free/ friction control adjustments for monitor viewing placement. Purchased as a backup and never used. New from Tiffen, the base monitor bracket sells for $1685. I’m selling this one with the extra bits for $1200 US. Serious only please. Email to: graysonaustin@me.com

Very complete Ronin 2 package for sale: I’m selling my trusty Ronin 2 package. This is an extremely complete production package in excellent condition. Please read carefully before emailing me. List of included: Ronin 2 Gimbal. Ronin 2 Ring. Flowcine Carbon Fiber Ring. Ronin 2 Standard accessories including Joystick Remote. Ronin 2 Mini Joystick (ring mounted). Motocrane Revolt and two cables (as new/unused). Ignite Digi accessory/counterweight bars. Cinemilled lower camera dovetail plate (long). Cinemilled Upper Dovetail Plates (2). Cinemilled cage extensions. Cinemilled Pan Bar plate. Various Counterweights (enough to balance just about any camera and lens combo). Cinemilled new style quick release Ronin2 dovetail clamp system. D-bus protection cover. 24 Volt camera power upgrade and multiple camera power cables (as new/unused since install). Gimbal Dock (new style). Lots of other useful accessories. Ronin 2 Case. Custom Rain Covers. This Ronin 2 is pre- DJI carbon fiber issues. Has never been abused or sub rented. Only used on my jobs and has not been used for vehicle or off road. Everything is in excellent condition. Does not drift. Holds position beautifully. You will not find a more complete, fully upgraded Ronin 2 in this condition. If purchased new, this setup with everything would cost well over $13,000 US. No batteries or chargers are included due to shipping issues with Lithium batteries and the fact that i use TB50 for many other things. I’m selling this incredibly complete package for $8000 US. Serious only please. Email to: graysonaustin@me.com

For sale is a G70X arm (purchased as a G70X, not an upgrade) in beautiful visual and mechanical condition. Purchased new by me directly from Tiffen. Was fully serviced by Tiffen during the strike/break. Has always since day one been protected by a cover (included). Comes with a two piece arm cover (new) and both a six inch and twelve inch length 3/4 inch Tiffen Rig size armposts (or a single twelve inch 5/8 inch PRO size adapted armpost if you choose with clamp rings and spin bearings. Also includes soft arm bag. This arm has been fantastic and I’m only selling because i am now the proud owner of the very first G70X 2 off of the production line. Selling this G70X for $9500 US. Serious only please. Email to: graysonaustin@me.com

Sold. Thanks to all who inquired. Grayson Grant Austin, SOC

Price Reduction for complete Talon Head system above. New Price: $30,000 US. Serious only. Email to: graysonaustin@me.com

Price Reduction for Tiffen M2 Tilting Topstage with built in Volt Brain. New price: $5000. Serious only please. Email to: graysonaustin@me.com Grayson G Austin, SOC

Price Reduced for as new/unused Vaxis Cine 8 monitor/receiver and additions of Transmitters and Receivers. New Price: $2500 US. Add a Vaxis Storm 3000 Transmitter for an additional $800. Add a Vaxis Storm 3000 Transmitter and a Vaxis Storm 3000 Anton Bauer Pass Through Receiver for an additional $1600 US. Serious only please. Email to: graysonaustin@me.com

Price Reduction: Now selling for $11,500 US. This is the very latest 6ghz XT Max version. Uncongested video transmission with 3000 feet of range and up to 4K video in real time. Grayson Grant Austin, SOC

Also selling a Vaxis Cine8 Monitor/Receiver. As new/unused. This is an excellent monitor with tons of features. Built in Vaxis Storm 3000 receiver. Can use internal antennas or external antennas (included). Has built in frequency scanner as well. Comes with the Vaxis Cage and handles kit as well as baby pin mount, neck strap, two power cables and five Vaxis Blade Antennas. Can be purchased separately or with a Vaxis Storm 3000 Transmitter or with any of the packages above. To purchase new from Vaxis would cost: $4388. Selling this one for: $3000. Buy it with any of the 1:2 (or more) systems listed above for $2750. Email me for any additional questions or more photos. Serious only please. Grayson Grant Austin, SOC graysonaustin@me.com

Movi XL For Sale with or without Fiber Optic Gyro: Because i received quite a few inquiries asking if i would sell the Fiber Optic Gyro separately and/or the Movi XL package separately, here are a few options available now. Please read the listing carefully before emailing me. Serious only please. If you don’t have funds available, please don’t email me. *Movi XL Fiber Optic Gyro (FOG) and two cables and case: New cost is $27,500 if they even have them in stock which they don’t. Selling for: $23,500. *Pristine Movi XL package with FOG, Shipping Case, Ignite-Digi TB50 Adapter Plates, Ignite-Digi Power Block and four Ignite-Digi camera power cables, Arri Style Camera Plate (19mm studio), XL Dovetail Plate, XL Lens Support, XL Rod Support, 19mm Carbon Lens Support Rods (various lengths. X3 sets), Pop and lock 50mm, Movi XL Chargers (2), Movi XL Spare Wiring Harness, Movi XL to Mitchell Mount, 4 Pin XLR to Anton Bauer adapter (X2) Plates, Extended Length 25mm Carbon Fiber Vertical Cage Rods (allows for a full studio build camera to go in the cage with the handle on it), The original cage rods are also included, Various P Tap power cables also included, Original Movi XL battery plates, Movi XL to NODO Inertia Wheels/Alpha Wheels Wireless Receiver Comm cables (X2) included, And many extras and tools not listed here: To purchase new would be: $60,000 plus. Selling for: $41,000. This same package without FOG sells new for: $32,500. Selling this one without FOG for $20,000. *Add the Brutal R&D Slip Ring (with two power cables), 90 Degree Mitchell Mount, Flowcine Tranquilizer (with Overslung Mod) and all other accessories and cables for an additional $3000 to either Movi XL package (with or without FOG). These additional items would be $6600 if purchased new. With the FOG, this is the complete package. That’s everything Movi XL related that i have which would cost well over $66,000 new, selling complete for only $44,000 which has now been discounted another $1000 less. The Slipring and Cables, Tranquilizer with Overslung Mod and 90 degree mitchell are all essentially as new/unused, as is the Ignite-Digi Power Block and Ignite Camera Power Cables. These items have never been used on set. Testing only. Included in the price is a Movi XL Tune Up/Check Up to be done after the holidays ($950 value). Delivery of Movi XL can be taken after the Freefly Check Up and payment/funds transfer is complete. It can then be shipped to the buyer from Freefly if desired. Shipping and insurance are the responsibility of the buyer. Email for additional photos or questions. Grayson Grant Austin, SOC graysonaustin@me.com

Price Reduced: Now selling for $12,000 US. Still as new/unused. Perfect for that end of year tax write off. Grayson Grant Austin, SOC

Tiffen M2 Topstage for sale: Tiffen M2 Topstage for sale with tilt and Volt control built in. Includes a dovetail plate as well. This was my main M2 Topstage and shows signs of normal use but is mechanically and electronically working perfectly. No slop in the fore-aft and side-side. Tilt locks and dovetail plate lock mechanism are perfect as well. Volt controller is built in and works exactly as it should. Sells new from Tiffen for $9790. I’m selling mine for $6500 US. Serious only please. Email for additional photos and questions. Grayson Grant Austin, SOC graysonaustin@me.com

Vaxis Storm 3000 Sale: The last of my extra Vaxis Storm 3000 (3000 feet line of sight) gear is available now. All units are in excellent working and physical condition. Some units were backups so have seen very little use. *1:1 Vaxis Storm 3000 system with V mount receiver. New from Vaxis cost is $4999. Selling now $2500 US. I have two of these 1:1 systems available. *1:2 Vaxis Storm 3000 system with two V mount receivers sells new from Vaxis at $9080. Selling for $3750 (1:2 system includes free Vaxis Channel Scanner). *1:1 Vaxis Storm 3000 system with Anton Bauer pass through receiver sells new from Vaxis for $6580. Selling now for $3200 US. *1:2 Vaxis 3000 Storm system with Anton Bauer pass through receivers sells new from Vaxis for $10,000. Selling now $4200 US. *1:3 Vaxis 3000 Storm system with Anton Bauer pass through receivers sells new from Vaxis for $13,500. Selling now for $6000 US (1:3 system includes a free Vaxis Storm 800 receiver). All systems come with a power cable for each unit (transmitter and receiver) as well as a full set of Vaxis flexible blade antennas. Anton Bauer pass through receivers also come with a set of stubby antennas at no additional cost. Transmitters come with a mounting arm. Never sub rented. Always used on my jobs only. Prior to purchase, a video will be sent to the buyer showing all units working. Email for additional photos and any questions. Grayson Grant Austin, SOC graysonaustin@me.com

Please read entire post carefully before emailing with questions. No window shopping please. For sale is an absolutely pristine, turnkey Ravensclaw High Payload (rare) version of Talon Head, complete with tons of accessories, upgrades and cables: *High Payload Talon Head: This is not the standard version of Talon Head which peaks at 50 pounds of payload. This is the High Payload version from Ravensclaw (the actual manufacturer) and is rated at 75 pounds (easily) of payload and is fully stable even without the outrigger. This head has been completely redone inside and out with the brushless motor upgrade, high payload bearing upgrade, the backpan/stabilization upgrade which can be individually turned on and off for each axis, all new electronics and wiring within. This is essentially a new head. *The Control Console/Wheels: Also completely redone inside and out with updated electronics, wiring and new carbon fiber casing outside. A brand new (new style) set of wheels which are as new/unused as well as the original style wheels included. Console is Mitchell mount with a castle nut. Comes with two wheel interconnect cables. *(Two) 2 inch risers (electronic connections). *Outrigger/Side stabilizer allows for even larger builds with more extreme dynamics. *Standard and offset camera dovetail mounts. *Arri style dovetail mount as well as a brand new (still in plastic) Wooden Camera 12 inch dovetail. *Both the original standard mitchell as well as a brand new/unused new style keyed Mitchell mount and castle nut and castle nut wrench (two). *Long Power and Control Cables with duplicates (and more) of each. *Block battery adapter cables (two). *A/C power supply box. *Case included and will include brand new interior which allows for head to stay built with outrigger attached which is being fabricated now. This is a very complete, turnkey two axis remote head that is absolutely bulletproof. Has all the regular Talon Head features like repeatable moves, etc. Because it has been upgraded with the backpan/stabilization feature, this head is fantastic for car mounting and other applications. Turn on or off each axis of stabilization depending on the situation. This is why most stabilized heads have an issue when mounted to the actual vehicle being shot. A typical stabilized head wants to maintain it’s heading even when the vehicle turns. With this Talon Head, you can turn the stabilization off for pan but keep it on for the tilt axis or off all together. The brushless motor upgrade makes this head even more accurate, repeatable and quiet even at high speeds. Never sub rented. Only used on my jobs. Price reduction: Selling everything complete for: $32,000 US. You can message me through the forum but i may or may not get it quickly so please email for questions, more details and more photos to: graysonaustin@me.com Grayson Grant Austin, SOC All photos were taken by me and are my property and are not to be used for any other purpose.

As New/Unused Teradek Bolt 6 XT Max system for sale: Teradek Bolt 6 XT Max 1:1 system purchased as an additional system for a project and never ended up using it. Tested to be working perfectly. Cost to purchase new: $13,590 (not including extras). Selling for: $12,600 US including additional extras. Still under manufacturers warranty. Comes with: 1 x Bolt 6 XT MAX TX with pass through Gold Mount 1 x Bolt 6 XT MAX RX with pass through Gold Mount 2 x Bolt 6 XT Battery Cover Plate Front 1 x Lightstand Adapter 1/4-20in 1 x Hot Shoe Adaptor 4 x Screw Flat Head Phillips 2 x Screw Socket Cap A S, M3 x 16mm 1 x Hex L key 2.5mm size 3-5/8" length 2 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 1 x (Bit 718) 2pin Conn. to 2pin Conn. (Alexa) 18in/46cm Cable 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case Large - Bolt XT TX/2RX 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 4 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA) 1 x Wooden Camera - Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 5") 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable 2 x Bolt 6 XT Battery Cover Plate Rear 1 x Bolt 6 XT TX Color Band (Red Rubber) 1 x Bolt 6 XT TX Color Band (Yellow Rubber) 1 x Bolt 6 XT TX Color Band (Green Rubber) 1 x Bolt 6 XT TX Color Band (Blue Rubber) 1 x Bolt 6 XT RX Color Band (Red Rubber) 1 x Bolt 6 XT RX Color Band (Yellow Rubber) 1 x Bolt 6 XT RX Color Band (Green Rubber) 1 x Bolt 6 XT RX Color Band (Blue Rubber) Additional extras included: Wooden Camera transmitter quick release V lock bracket and camera side receiver (arri locating). (One) Kondor Blue Nato Rail attachment base for transmitter or receiver. Buyer is responsible for shipping and insurance if wanted. Optimally should have their own shipping account. All photos were taken by me and are my property. They are not to be used for any other purpose by anyone. Email me for faster response at: graysonaustin@me.com Grayson Grant Austin, SOC

Heavily Modified Movi XL With Fiber Optic Gyro, Ignite-Digi TB50 Battery Adapter, Ignite-Digi Power Block, Brutal R&D Power and Video Slip Ring, Flowcine Tranquilizer And Tons Of Accessories For Sale: Please Read Entire Listing Carefully Before Contacting Me. For sale is an excellent condition Movi XL package. An incredibly complete Feature Film, Series, Commercial ready package in excellent condition and perfect working order with all needed accessories and cables including flight/travel case. Package Includes: Movi XL 3 Axis Stabilized Remote Head With Fiber Optic Gyro And Flight Case. Brutal R&D Full Slipring system for power and video (brand new/unused) with two remote power cables (new/unused). Flowcine Tranquilizer ($3000 value) is now included in the package (complete with all available polymers and passive weight plates). Also comes with Shore 70 Pan Barrels. Mitchell Female Mount. Mitchell Male Mount. Industry Sherpa Overslung Mod with polymers and air bladder. Complete Mimic system w/ Atomos Shogun Flame High Bright Monitor, Monitor Cage With Handlebars and Anton Bauer Battery Plate, Mini Sliding Dovetail (to attach Mimic system to your favorite Fluid Head or Geared Head with an Arri Sliding Dovetail Plate), Mimic Quick Release, Antennas (short and long) and Charging/Power Cable. Arri Style Camera Plate (19mm studio). XL Dovetail Plate. XL Lens Support. XL Rod Support. 19mm Carbon Lens Support Rods (various lengths. X3 sets). Pop and lock 50mm. Movi XL Chargers (2). Movi XL Wiring Harness spare. Movi XL to Mitchell Mount. Custom Easy 90 Degree Mitchell Male to Mitchell Female (For Nose Mounting Of The XL. New/Unused). Ignite Digi TB50 adapter and power block (original Movi XL battery plates included as well). The Power Block is new/unused). Ignite Digi power cables (2) for Alexa Mini, Mini LF and Alexa 35 (New/Unused). Ignite Digi 12 volt camera power cables (2) to universal 4 pin XLR. 4 Pin XLR to Anton Bauer adapter (X2) Plates. Extended Length 25mm Carbon Fiber Vertical Cage Rods (allows for a full studio build camera to go in the cage with the handle on it). The original cage rods are also included. Various P Tap power cables also included. Movi XL to NODO Inertia Wheels/Alpha Wheels Wireless Receiver Comm cables (X2) included. And many extras and tools not listed here. No batteries are included in this sale as i use them (TB50) for my other remote heads and they are difficult to ship without carrier issues. A small sample of projects this Movi XL package has been used on include: Green Book. Anne Rice’s Mayfair Witches. On Becoming A God In Central Florida. Queen Sugar. NCIS: New Orleans. Crater. Filthy Rich. The Movi XL has a 50 pound camera payload and with the Fiber Optic Gyro is exceptional at stabilizing under all conditions and is immune from temperature changes or G Force. This entire package has been exceptionally well cared for and maintained. It has never been sub rented. It goes out only on my jobs. I purchased every item listed here brand new. Total to purchase everything listed new would be more than $65,000 US. Selling everything listed plus many useful extras for $45,000 US (which now includes the complete Flowcine Tranquilizer and a full rain cover as well. Available Now. Expand your business. Start earning rentals now. Serious only please. Please don’t email if you don’t have the funds available to purchase. I am also not splitting up the package at this time so please don’t ask. Use email address below to get to me quicker. All gear is located in New Orleans, Louisiana area. Buyer is responsible for shipping costs and any insurance needed and optimally should have their own shipping account available(Fedex, UPS, DHL, etc). Email for additional photos and for further questions/details. Local pickup/Inspection is also available/suggested working around my current schedule. Grayson Grant Austin, SOC graysonaustin@me.com

Price reduced: Now selling for $1800 US. email to: graysonaustin@me.com

This item is sold. Grayson Grant Austin, SOC

All items sold. Grayson Grant Austin, SOC

Prices reduced: *SmallHD 702 now $500 each. *Atomos Shogun Flames now $600 each. email to: graysonaustin@me.com

Prices reduced on last remaining items: *1:1 Vaxis Storm 3000 system with V mount receiver now $2000 US. *1:2 Vaxis Storm 3000 system with V mount receivers now $3000 US (1:2 system includes free channel scanner). *1:1 Vaxis Storm 3000 system with Anton Bauer pass through receiver now $3000 US. *1:2 Vaxis 3000 Storm system with Anton Bauer pass through receivers now $4000 US (1:2 system includes a free Vaxis Storm 800 receiver). *Vaxis Storm Cine8 Monitor/Receiver now $3600 US. US buyer preferred but will sell to buyer outside the US who has their their own shipping/freight account. No exceptions. email to: graysonaustin@me.com

Price reduction: $61,000 plus worth of pristine gear now priced at $48,000 US. Will not be selling outside the United States unless you have your own shipping/freight account. Grayson Grant Austin, SOC

Prices reduced: Sleeve: $600. Handle: $400. email to: graysonaustin@me.com

This item is no longer available. Grayson Grant Austin, SOC