-
Posts
9 -
Joined
-
Last visited
-
Days Won
1
Posts posted by JohanPhillips
-
-
You can optimize it for tour plate using thin spacers,
Open it up and tou will see,
Think bets have a video of it
best of luck
-
-
In excellent condition. Not used a lot and works perfekt.
Selling this great piece of kit to someone who has more use for it.
Including
Wave
1 Long plate
2 short plates
2 PRO-wave power (3pin not the cine live)
D-tap-wave power
Transport box
€ 7159 spent
Asking € 5400
preferred shipping UPS
Bank-wire please no Pay-pal
Located in Stockholm
mail for more pics
Regards johan
+46707330691
johan@steadicam.se
-
Köp en begagnad pro gimball istället!
mycke bättre och går nog att hitta!!
lycka till :-)
-
I'm selling my lightly used Bartech system.
As you can see, the system is very well maintained and fully functional.
Has been sitting unused for a long time and about time someone put it to use.
Here's what's included in the package:
- BFD Transmitter
- BFD Receive
- Heden M26p Analog Focus motor
- Bracket for motor driver
- Lens gears: 0.8m-32P, 0.6m, 48P, 0.5m, 0.4/64pitch, (pleas se pic. not 100% sure of exact gears)
- 19mm and 15 mm motor mount
- 19mm universal mounting bracket; will mount on either side of the motor in either direction
- Hard case for the BFD system
Cables:
Please se pictures....
send a message for more pics
Asking for reasonable offer
Item is located in Stockholm Sweden
shipping is UPS,
Let me know if you need additional information or photos.
johan@steadicam.se
+46707330691
Best regards johan
-
S O L D
Skickat från min iPhone med Tapatalk
-
Selling a great system.
Has been upgraded with latest firmware from Teradec and performs well.
The system looks good, with minor signs of use
Has been sitting on the shelf for some time and time to put it back to work
1 transmitter
3 receivers
1 cage for TV-logic 6" monitor (w56) with custom main switch
for sony MP-F batteries
A 6600mAh will get you about 3 hr use
2 D-tap to Lemo 2 pin
1 Fischer 3pin to Lemo 2 pin
2 mains power supply
1 spare Lemo 2 pin 90 degres
2 battery plates with Lemo 2 pin (Canon LPE6)
Please call or mail if you have any questions,
asking $1800
preferably ship with ups
johan@steadicam.se
skype johanPH
viber +46707330691
-
S O L D [emoji846]
Skickat från min iPhone med Tapatalk
-
Lowering the price to see if this will prompt anyone?
this is a great system at a bargain!
asking $2400 OBO
- 1
-
lowered price asking $2800 OBO
-
Still looking?
-
lowered price asking $3000 OBO.
best regards johan
-
-
-
Zero delay HD/SD Transmitter/ receiver
The system has great upgrades
The transmitter is rebuilt with a new HD out, so it has the in/out funktion (loop trough)
Also upgraded powersupply, alowing for 9-28v (unsure of exact number)
This is great for povering of the Arri 24v 3pin-fischer and such.
The reciver has been upgraded with an additional HD-SDI output.
This system is performing great and has impressed people on set many times, equipped with the white panel antenna it really covers a great distance.
Rubber duckie antennae
1 x video cable & 2 x audio cable, 4 pin XLR to boxx and D-tap to boxx
5 array 20db directional antenna
Updated software & well maintained
System checked at Boxx about 3 months ago when the power supply was installed,
asking $3500
can ship ups or fed ex
byer pays shipping
please mail or call for questions,
johan@steadicam.se
skype johanPH
viber +46707330691
-
This is great for use with all the lightweight zooms on your Steadicam.
separate MDR for single channel zoom motor control
The housing is really light weight,
Preston motor cable
power cable. Powers into the 3pin Lemo 12/24 output on a PRO or XCS (mkv also the same?)
Thumb controller to MDR cable
$ 1500.00 (OBO)
please mail or call for questions,
johan@steadicam.se
skype johanPH
viber +46707330691
-
-
PRO
Make an offer. Buyer pays shipping.
prefably UPS
johan@steadicam.se
Attached Images -
Thank you all who mailed about the Preston, It is now ben shipped to NY, to do sharpness,,,,,on set there,
I got a bit surprised about all the mails from interested people.
Not easy for a "thick fingered"camera person to all of a sudden be running a small office ;-) ha ha
The easy answer why is probably just that HU3 is fantastic product that holds its value remarkably well,
cheers to you all and good luck in the future.
-
time to sell and let a fantastic piece of gear find a new owner,owned by me since new.It has never let me down on set.Hand unit 3 (g4 chip)MDR 2 (g4 chip)DM 1x motor with Hill 19mm kip-style and Hill 15-19 mountDM 2 motor with Hill 19mm kip-style and Hill 15-19 mountMotor offset2 wide gears for lens scales that travel3 gears for video lensesCamera MDR mount by Jerry Hill. MDR to 3/8 mount, for mounting MDR directly on camera3 FM50 almost new batteriesCables:4 motor cables2 MDR power cables1 PRO TO MDR Power cable6 camera start cables(2 ARRI 3pins, RED one, Epic, Aaton, Sony)Main command cable (long)Neck strapPreston and Cinetape interface, lets you se the cinetape readout in the Preston screen.6 Premarked rings + spare, sheets,Hand unit backside mount for small TV or Acc.Price: $16'000.- OBO-------------------------------------------------
Johan Phillips Film & Steadicam
Solhagavägen 41
16347 Spånga
Sweden
T: +46 707330691
johan@steadicam.se
www.steadicam.se
-
Hello,
Sounds like a tricky shoot.
My 2 cents is to if possible, stay of the snowmobile and to hardmount on the sled instead.
They are fantasticly smooth and have a much lower CG rhen the snowmobile.
Also on the sled you can fit DOP and a focuspuller.
We also did a rig to try to cover the tracks, some branches or likwise works preatty well.
Take it easy if going downwords! Then its not tje best setup.
Regards johan
-
Hello.
Hope you all are well.
I have a job coming up with the Alexa and a onboard CODEX.
Apparently its about 25w in 24v. And a 2,5 kg lump on top of the camera.
I normally power the Alexa from my 2 Dionic HC and ger about one and a half houer of runtime.
What do you guys think of this little thing? Is it ok, or a ........
How do you power it? Through the rig or Alexa onboard bats.
Any tips and pointers would be greatly appreciated.
Best regards johan
-
Hello fellow operators
does anyone have some tip about where to rent a Steadicam in NY.
the rig is needed for a live-TV event in start of November.
Preferably a PRO or a EFP.
thanks in advance
best regards johan
-
DM-1 Preston Motor
The motor has low-hours since I normally use the DM-2 for regular work.
15mm mount on motor.
serviced at Preston.
asking $1800
will ship worldwide via UPS/Fed-Ex.
best regards Johan Phillips
skype: johanph
+46 70 733 0691
WANTED Battery Rack Gen IV
in Steadicam Marketplace - Wanted
Posted
hello,
looking to buy a gen 4 rack for a rebuild from AB to V-lock
anyone have one for sale,
regards johan
johan@steadicam.se
+46707330691
(the pic is a loner)