christian evans

Hello All! I'm selling my monitor and GPI Pro Mount. They are both in excellent shape. The only reason I am selling is because I sold my sled and this is the last item to go. - Transvideo 6" CineMonitorHD6 X-SBL Evolution Monitor. - $2,750 - Telescoping monitor mount - $1000 - 2 - Enhanced Transvideo power cable included $3500 if purchased all together. Monitor inför 1 x 3G HD/SD SDI + 1 Rclk out (BNC) 1 x CVBS + Loop (BNC) 1 x Accessory YPrPb / RGB / CVBS (Lemo8) 1 x Mini HDMI Contrast Ratio 600:1 Viewing Angle Horizontal: ±80° Vertical: +60°/-80° Brightness 2000 cd/m2 Power 10 to 36 VDC Via XLR4 connector (-1, +4) with galvanic insulation Consumption 19 W Dimensions 7.7 x 6.6 x 2.6" (19.5 x 16.8 x 6.5 cm) Weight 3.2 lb (1.44 kg) Please message here or contact me via email at Christianm.evans@gmail.com Best, Christian Evans

Hello All! - Transvideo 6" CineMonitorHD6 X-SBL Evolution Monitor. - $2,750 - Telescoping monitor mount - $1000 - 2 - Enhanced Transvideo power cable included $3500 if purchased all together. Monitor inför 1 x 3G HD/SD SDI + 1 Rclk out (BNC) 1 x CVBS + Loop (BNC) 1 x Accessory YPrPb / RGB / CVBS (Lemo8) 1 x Mini HDMI Contrast Ratio 600:1 Viewing Angle Horizontal: ±80° Vertical: +60°/-80° Brightness 2000 cd/m2 Power 10 to 36 VDC Via XLR4 connector (-1, +4) with galvanic insulation Consumption 19 W Dimensions 7.7 x 6.6 x 2.6" (19.5 x 16.8 x 6.5 cm) Weight 3.2 lb (1.44 kg) Please contact me via message here. Best, Christian Evans

Hello All! Transvideo 6" CineMonitorHD6 X-SBL Evolution Monitor. "Purchased a few years ago new and has barely been used. In perfect shape with only the smallest signs of use." - $3000 Telescoping monitor mount "New $1450 Pre tax" - $1000 2 - Enhanced Transvideo power cable included. Monitor inför 1 x 3G HD/SD SDI + 1 Rclk out (BNC) 1 x CVBS + Loop (BNC) 1 x Accessory YPrPb / RGB / CVBS (Lemo8) 1 x Mini HDMI Contrast Ratio 600:1 Viewing Angle Horizontal: ±80° Vertical: +60°/-80° Brightness 2000 cd/m2 Power 10 to 36 VDC Via XLR4 connector (-1, +4) with galvanic insulation Consumption 19 W Dimensions 7.7 x 6.6 x 2.6" (19.5 x 16.8 x 6.5 cm) Weight 3.2 lb (1.44 kg) https://www.search-manual.com/transvideo-6-cinemonitorhd6-x-sbl-evolution-monitor-306697-manual?fbclid=IwAR1H0S3_uNgP3o2OZdWi5Bh0MC3y6BPmOv_imld1Ux5bUJLbdjKgtLF--zo

Hello All! Transvideo 6" CineMonitorHD6 X-SBL Evolution Monitor. "Purchased a few years ago new and has barely been used. In perfect shape with only the smallest signs of use." - $3000 Telescoping monitor mount "New $1450 Pre tax" - $1000 2 - Enhanced Transvideo power cable included $4000 Total Monitor inför 1 x 3G HD/SD SDI + 1 Rclk out (BNC) 1 x CVBS + Loop (BNC) 1 x Accessory YPrPb / RGB / CVBS (Lemo8) 1 x Mini HDMI Contrast Ratio 600:1 Viewing Angle Horizontal: ±80° Vertical: +60°/-80° Brightness 2000 cd/m2 Power 10 to 36 VDC Via XLR4 connector (-1, +4) with galvanic insulation Consumption 19 W Dimensions 7.7 x 6.6 x 2.6" (19.5 x 16.8 x 6.5 cm) Weight 3.2 lb (1.44 kg) https://www.search-manual.com/transvideo-6-cinemonitorhd6-x-sbl-evolution-monitor-306697-manual?fbclid=IwAR1H0S3_uNgP3o2OZdWi5Bh0MC3y6BPmOv_imld1Ux5bUJLbdjKgtLF--zo

I'm selling a GPI Pro Sled that I purchased a few years ago. I have barely used it due to covid and other career choices and I've decided to finally sell it. It's in great shape with only the most minimal signs of use. I had the donkey box and gimbal tuned up last year and it hasn't been used since. I am located in Southern California but we can figure out shipping. I am looking around $22K but open to a conversation. I am also open to selling parts individually. GPI Pro Sled w/Cine Live DB II Cine Live Upper Junction Box Cine Live Lower Junction Box Telescoping Center Post HD Center Post cable Pro Gimbal Pro Gimbal Handle ext. with clamp Gen IV battery rack Telescoping monitor mount MDR bracket: Preston 2 or Bartech Transvideo 6" CineMonitorHD Evolution X-SBL Transvideo power cable Innerspace pelican case Two Hill docking bracket clamps Miscellaneous power cables “2 - 3 pin/arri” Miscellaneous BNC cables 2 ARRI/PANA 9’’ plates Hill docking bracket Please see attached photos and I am open to any questions or inquires. Just hit me up here or via email at Christianm.evans@gmail.com Not sure why some photos are upside down. Cheers!

I'm selling a GPI Pro Sled that I purchased a few years ago. I have barely used it due to covid and other career choices and I've decided to finally sell it. It's in great shape with only the most minimal signs of use. I had the donkey box and gimbal tuned up last year and it hasn't been used since. I am located in Southern California but we can figure out shipping. I am looking around $22K but open to a conversation. I am also open to selling parts individually. GPI Pro Sled w/Cine Live DB II Cine Live Upper Junction Box Cine Live Lower Junction Box Telescoping Center Post HD Center Post cable Pro Gimbal Pro Gimbal Handle ext. with clamp Gen IV battery rack Telescoping monitor mount MDR bracket: Preston 2 or Bartech Transvideo 6" CineMonitorUHD6 SBL + Evolution Transvideo power cable Innerspace pelican case Two Hill docking bracket clamps Miscellaneous power cables “2 - 3 pin/arri” Miscellaneous BNC cables 2 ARRI/PANA 9’’ plates Hill docking bracket Please see attached photos and I am open to any questions or inquires. Just hit me up here or via email at Christianm.evans@gmail.com Not sure why some photos are upside down. Cheers!

Trying to sell the whole rig together if possible.

Hello All, I'm selling a GPI Pro Sled that I purchased a few years ago. I have barely used it due to covid and other career choices and I've decided to finally sell it. It's in great shape with only the most minimal signs of use. I had the donkey box and gimbal tuned up last year and it hasn't been used since. I am located in Atlanta but we can figure out shipping. I am looking around $22K but open to a conversation. I am also open to selling parts individually. GPI Pro Sled w/Cine Live DB II Cine Live Upper Junction Box Cine Live Lower Junction Box Telescoping Center Post HD Center Post cable Pro Gimbal Pro Gimbal Handle ext. with clamp Gen IV battery rack Telescoping monitor mount MDR bracket: Preston 2 or Bartech Transvideo 6" CineMonitorUHD6 SBL+ Evolution Transvideo power cable Innerspace pelican case Two Hill docking bracket clamps Miscellaneous power cables “2 - 3 pin/arri” Miscellaneous BNC cables 2 ARRI/PANA 9’’ plates Hill docking bracket Please see attached photos and I am open to any questions or inquires. Just hit me up here or via email at Christianm.evans@gmail.com Not sure why some photos are upside down "low mode". Cheers!

Hello All, I'm selling a GPI Pro Sled that I purchased a few years ago. I have barely used it due to covid and other career choices and I've decided to finally sell it. It's in great shape with only the most minimal signs of use. I had the donkey box and gimbal tuned up last year and it hasn't been used since. I am located in Atlanta but we can figure out shipping. I am looking around $22K but open to a conversation. I am also open to selling parts individually. GPI Pro Sled w/Cine Live DB II Cine Live Upper Junction Box Cine Live Lower Junction Box Telescoping Center Post HD Center Post cable Pro Gimbal Pro Gimbal Handle ext. with clamp Gen IV battery rack Telescoping monitor mount MDR bracket: Preston 2 or Bartech Transvideo 8” Cine Monitor HD Evolution Transvideo power cable Innerspace pelican case Two Hill docking bracket clamps Miscellaneous power cables “2 - 3 pin/arri” Miscellaneous BNC cables 2 ARRI/PANA 9’’ plates Hill docking bracket Please see attached photos and I am open to any questions or inquires. Just hit me up here or via email at Christianm.evans@gmail.com Not sure why some photos are upside down. Cheers!

Hello All, I'm selling a GPI Pro Sled that I purchased a few years ago. I have barely used it due to covid and other career choices and I've decided to finally sell it. It's in great shape with only the most minimal signs of use. I had the Donkey box tuned up and the gimbal centered last year and it hasn't been used since. I am located in Atlanta but we can figure out shipping. I am looking around $22K but open to a conversation. I am also open to selling parts individually. GPI Pro Sled w/Cine Live DB II Cine Live Upper Junction Box Cine Live Lower Junction Box Telescoping Center Post HD Center Post cable Pro Gimbal Pro Gimbal Handle ext. with clamp Gen IV battery rack Telescoping monitor mount MDR bracket: preston 2 or bartech Transvideo 8” Cine Monitor HD Evolution Transvideo power cable Innerspace pelican case Two Hill docking bracket clamps Miscellaneous power cables “2 - 3 pin/arri” Miscellaneous BNC cables 2 ARRI/PANA 9’’ plates Hill docking bracket Please see attached photos and I am open to any questions or inquires. Just hit me up here or via email at Christianm.evans@gmail.com Not sure why some photos are upside down. Cheers!

Hello All, I'm selling a GPI Pro Sled that I purchased a few years ago. I have barely used it due to covid and other career choices and I've decided to finally sell it. It's in great shape with only the most minimal signs of use. I had the Donkey box tuned up and the gimbal centered last year and it hasn't been used since. I am located in Atlanta but we can figure out shipping. I am looking around $24K but open to a conversation. I am also open to selling parts individually. GPI Pro Sled w/Cine Live DB II Cine Live Upper Junction Box Cine Live Lower Junction Box Telescoping Center Post HD Center Post cable Pro Gimbal Pro Gimbal Handle ext. with clamp Gen IV battery rack Telescoping monitor mount MDR bracket: preston 2 or bartech Transvideo 8” Cine Monitor HD Evolution Transvideo power cable Innerspace pelican case Two Hill docking bracket clamps Miscellaneous power cables “2 - 3 pin/arri” Miscellaneous BNC cables 2 ARRI/PANA 9’’ plates Hill docking bracket Please see attached photos and I am open to any questions or inquires. Just hit me up here or via email at Christianm.evans@gmail.com Not sure why some photos are upside down. Cheers!

Hello All, I'm selling a GPI Pro Sled that I purchased late 2018. I have barely used it due to Covid and other project choices and I've decided to finally sell it. It's in great shape with only the most minimal signs of use. I had the Donkey box tuned up and the gimbal centered and it hasn't been used since. I am located in Atlanta but we can figure out shipping if that is a thing. Please see attached photos and I am open to any questions or inquires. I am looking around $24K but open to a conversation. GPI Pro Sled w/Cine Live DB II Cine Live Upper Junction Box Cine Live Lower Junction Box Telescoping Center Post HD Center Post cable Pro Gimbal Pro Gimbal Handle ext. with clamp Gen IV battery rack Telescoping monitor mount MDR bracket: preston 2 or bartech Transvideo 8” Cine Monitor HD Evolution Transvideo power cable Innerspace pelican case Two Hill docking bracket clamps Miscellaneous power cables “2 - 3 pin/arri” Miscellaneous BNC cables 2 ARRI/PANA 9’’ plates Hill docking bracket Just hit me up here or via email at Christianm.evans@gmail.com Not sure why the some of the photos are upside down. Cheers!

Hello All, I am making a transition in my career and have been selling parts of my kit. I have a GPI Pro Sled that I purchased late 2018. I have barely used it due to Covid and other project choices and decided to finally sell it. It's in great shape with only the most minimal signs of use. I had the Donkey box tuned up and the gimbal centered about a year ago and it hasn't been used since. I am located in Atlanta but we can figure out shipping if that is a thing. Please see attached photos and I am open to any questions or inquires. I am looking around $24K for this. This package includes: DB II Center telescoping post Gen IV battery rack Lower Junction Box Cine/Live Upper Junction Box Cine/Live HD Center Post Cable Pro Gimbal Gimbal Handle Extended Telescoping monitor arm MDR Mount Transvideo 8" Cine Monitor HD Evolution Two Docking brackets Fitted Innerspace Pelican Case Miscellaneous power cables and bnc cables Just hit me up here or via email at Christianm.evans@gmail.com P.S. It seems like some photos might be upside down. Not sure why that is. Cheers!