Mike Heathcote SOC

Take everything (13 items) for $800.00US or individual items, prices below: 1. Canatrans NTSC Transmitter S/N 1001 New $1500.00 - Asking $400.00 US Comes with two Antennas and 1 Ptap Power Cable. 2. XCS Alexa Adapter Plate New $450.00 - Asking $250.00 US Attaches to the bottom of the ARRI BPA plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity. 3. XCS/BPA for ARRI Alexa New $200.00 - Asking $100.00 US Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates. 4. RedByte Decimator Version 1 DownConverter Asking $100.00 US Comes with 1 hirose power cable and 1 A/C adapter. 5. Bartech Analog Receiver Matte Box Mounting Bracket New $200 - Asking $100.00 US 6. Two Bartech Analog Gimbal Hard Wired Focus Modules (2) New $100 each - Asking $80.00 for two Plugs directly into receiver and has a small finger wheel to dial focus. 7. Mickey Dynamic Level for 2 inch Post New $120 - Asking $50.00 US The Vinyl wheels are a little worn but it still works. 8. PRO Low Mode “J” Bracket Asking $50.00 US 9. XCS Transmitter Bracket New $150.00 – Asking $50.00 US Attaches to the dovetail on the rear of the camera plate and on the lower electronics housing of the Ultimate sled. Keeps the transmitter at the highest point at all times. 10. PRO DB2 MDR2 Dovetail/Bracket Mount Asking $50.00 US I don’t have any screws. 11. Steadicam Gimbal J-7 Zoom Control Asking $50.00 US Comes with Hirose to 8 Pin Canon and 12 pin Fuji 12. Teradek Bolt Pro Fanless Receiver Cage for TV Logic VFM-056WP monitor and battery plate with hole for Lemo Socket New $100 for both – Asking $50.00 US Designed by KarWai on Shapeways. Brand New never used. More details here: http://www.shapeways.com/product/6SFVMU3LH/teradek-bolt-cage-fanless-rx-for-tv-logic-vfm056?and http://www.shapeways.com/product/H5PFD2T76/tvlogic-battery-plate-with-lemo-power-socket-v2-1?li=more-from-shop&optionId=41548180 and http://www.shapeways.com/product/H5PFD2T76/tvlogic-battery-plate-with-lemo-power-socket-v2-1?li=more-from-shop&optionId=41548180 13. Camera Comfort Cushion New $60.00 – Asking $30.00 US Comes with two pads. Please email me mike @ mikeheathcote.com

SOLD! Thanks for your interest and emails.

Hi there, I have a Digital Bartech for sale with a Heden M21 Motor. Here is an itemized list: 1. BarTech Focus Device (BFD) Handset (1) S/N #T1.1279 (The Hand Unit has been modified with a 3/8ths mount on the top and reinforced Lanyard mount) 2. fStop Wireless v2.1 BarTech Receiver (1) S/N #1142 3. Heden M21VE-L Motor (1) S/N #3122 4. 916 MHz 1/4 Wave 3 1/8" Long Antenna for Handset (1) (double yellow) 5. 900 MHz 1/4 Wave Antenna for Receiver (2) (single yellow) 6. Long Range Handset Antenna from DigiKey (2) (double yellow) 7. Long Range Receiver Antenna from DigiKey (1) (single yellow) 8. 2 Pin Lemo to PTap Power Cable (1) 9. 8 Pin Digital Motor Cable 10. Custom Y Cable Single 2 Pin Lemo Female to Double 2 Pin Lemo Male (allows you to power to digital Bartechs from one cable) (2) 11. Aluminum Bartech Marking Rings (16) (They pressure fit smoothly but I will include a couple screws if you like to screw them down, there are two holes on the hand unit to screw down the discs one of them is stripped one of them is good) $544 worth of rings (sold new for $34 US each) 12. Shapeways Plastic Slip on Marking Rings (12) (These rings also pressure fit, they were custom made through shapeways) $120 worth of rings. $ No reasonable offer refused, Best offer takes it $ Buyer pays for shipping. Please email me if your interested mike @ mikeheathcote.com Thanks!

Looking for an F/I Hand Unit with or without a single channel MDR. Let me know! Thanks. Mike

Everything has been SOLD! Thanks. Mike

Hi there, I am selling the following: - Preston DM1X Motor S/N #3609 (Serviced at Preston three weeks ago $774 Repair, Brand new Internal Motor, Brand New working Condition) - Preston DM2 Motor S/N #5516 (Rarely used as iris motor only, works great) - Four Additional Pitch Gears ($200 Value). PLC Long Range Iris Control includes: - FStop Wireless Receiver S/N #0422 - FStop Wireless Remote Pedestal S/N #0114 - Preston Iris Box P/N 4020 - 1 2 Pin Lemo to 4 Pin XLR Power Cable I would like to sell everything for $8,000.00US or if separate: $5,500US for both Preston Motors DM1X and DM2 with additional Gears. $2,500US for the FStop Long Range Remote Iris Package (Pedestal, Receiver, Iris Box, Power Cable) Please email me if interested mike @ mikeheathcote.com. Buyer pays for shipping. Thanks!

I have found an HU3! Looking for an F/I Hand unit only. Please let me know if your selling!! Thanks. Mike

Still looking! Please email me if you happen to know anyone willing to sell either Hand Unit mike @ mike heathcote.com Thanks a lot! Mike

Still looking! Thanks.

Please email me if you have either hand units for sale. Thank you mike @ mike heathcote.com

Please email me if you are selling a kit or pieces of a kit mike @ mikeheathcote.com Thanks!

SOLD! Thanks

SOLD! Thanks

Sale Pending...

Sale Pending...

Grey XCS Dovetail Plate. No Rods or screws included. The adhesive has been taken off on the Camera side. Asking $200.00 OBO Please email mike @ mikeheathcote. com Thanks! Mike

"The Anton Bauer Uni Pac consists of a Gold Mount with integral belt loops and a 60" power cable with 4-Pin XLR connector. Allows a Gold Mount battery to power any piece of portable 12 volt or 14 volt device with a standard 4-pin XLR DC input." - http://www.bhphotovideo.com/c/product/69206-REG/Anton_Bauer_UNIPAC_Uni_Pac_Gold_Mount.html Asking $120.00, Buyer pays shipping. Please email me mike @ mikeheathcote . com Thanks! Mike

Hi there, I am selling a Bartech BFD HandSet and FStop Wireless V2-1 Bartech Receiver as well an F-Stop Long Range Remote Iris Pedestal and F-Stop Wireless 900 GT Receiver (Preston Iris Box Included). I also have a Brand New never opened Heden M26VE Motor. Cables: One PTap Power and One 4Pin XLR, I also have two Y Cables so you can piggy back the Receivers off each other. I have 10 Aluminum Hard Discs I will include as well for the Hand Unit. I would like to sell the package together and not separate the components, Best Offer. Please email me if interested mike @ mike heathcote.com. Thanks! Mike

Please email me if you are selling with or without motors! Thanks. mike @ mikeheathcote . com

Still looking!

Hey Guys, I have a brand new never used PLC Long Range Remote Iris Control (never used) and fStop Wireless 900GT Receiver (never used) for sale. I purchased both of these units as a backup for iris control last year from PLC and have never used it. Time for it to go! I am also including a Preston Remote Iris Box (p/n 4020) which sits in the Iris Pedestal. (The Preston iris box is used but its in excellent condition). It is a complete package providing a transmitter and receiver you just need to power it and attach it to any digital motor and your good to go. Retail Price from PLC in Canadian $: fStop TX/Iris Preston Pedestal - $2,100.00 + TAX fStop Wireless 900GT Receiver - $1,389.00 + TAX Preston Remote Iris Box - $800.00 + TAX I believe new from Preston. TOTAL: $4,289.00 CDN + TAX Brand New Best offer takes it. I will be going to Cinegear this year June 5th to the 9th so if you are interested and in the area I would be happy to meet you in person with the unit and save you the shipping. Let me know! Otherwise buyer pays shipping, I'm located in Toronto, Canada. Thanks Mike mike @ mikeheathcote . com

Hey Sandro. You should talk to Jennifer again. They are making them now.

As Jens mentioned Walter Klassen does make this block as well. I was in the shop yesterday and they look very nice! Mike

Looking for an HU3 and F/I Hand Unit. Please email me if you or anyone you know is selling. Thanks! Mike mike @ mikeheathcote.com

Hey Guys! Here are two more Steadicam oners from the TV series "Remedy" I wanted to share. Thanks! Mike