Howard J Smith

Hi This is an early V1 nexus base and you made need the spacers (1mm each side) I redesigned the base in the V2 & V3 versions slightly wider so this was possible - so if you want to invert your base and there is not enough room - I have spacers or just add 1mm on each side and you will be fine :-) The V3 can also do 45 degs and there is an Alt battery mount (If someone can let me know how to post photos I will show you) or you can email me for them Thank you Howard

Hi Alec Very nice mate :-) All AR's and Ωmega's can plug into any digital focus or Motion control system to operate the roll from a zoom or focus handset. It was tested 11 years ago (?) with the Mark Roberts System (moco) and it locks straight into there - there was (is) a small converter box that allow both Grey and Green motors on the rings to plug into 1 preston (1b 7 pin digital motor) cable. Very nice use for the system :-) Cheers Howard

Hi Evrim Nice to meet you and well said!! - thank you! All the best and fly safe respect Howard

Hi Guys Tim got me back on my original login if anyone wants to PM me :-) Cheers H

Hi Afton Spot on mate!! - Exactly! why do we all not drive the same car? or wear the same clothes? Choice. some people say a Lambo is better than a Ferrai - but I prefer an Aston Martin :-)

Hi Mark We use a new very high quailty bearing, not in any way tappered. Our gimbal works so well due to the quailty of machining. There are no adjustments - they either work or the are scrapped. Thank you Howard

If anyone has improved thier gimbal over the last few years it is MK-V we have it down to a science Custom jigs that tell us if a part is even a fraction of a thou out, if it is, it is scrapped - there are No shims in MK-V gimbals - just good solid machining. Like Pro and XCS. Our gimbals cost more to make than some peoples entire sleds. And for the record Eric you have not even seen our new gimbal let alone flown it? so I don't see how you can compare it?

Hi Guys Thank you for bring this up. Yes I was very aware, that sometimes in the past, we were not able to quite live up to some people’s expectations. And I wanted this changed. Obviously “it is not possible to please all the people all the time”, but I saw room for improvement. This is why I spent a lot of time and a lot of money to totally re structure the whole MK-V Group. This is why I closed ‘Systems’ and ‘Hire’ down in the UK, as they were inefficient companies, and opened 3 other MK-V Group companies around the world. We now have MK-V Europe based in New offices at the Pie factory in Manchester UK We have MK-V USA based in New offices between New York and Boston, in Hartford CT. We have MK-V ASIA based in Hong Kong And now we have MK-V Australia. (All details on the website www.mk-v.com) This Group of companies now can deal with requests and sales quickly and in the correct time zone and language. We also hold a much larger stock of items now and we can in most cases ship in a couple of days of order. (Specials take a little longer) The New V3+ Nexus and V2 Genesis sleds continue to be the systems of choice for most professional operators. Also the groundbreaking MK-V Revolution Systems. And we still continue the very popular Upgrades for almost all Sleds ever made. (Please email me for details) We look forward to continue to lead the way in Professional camera stabilization. If anyone has any questions at all re MK-V and its products please email me at howard@mk-v.com See you at Cinegear All the best Howard Become a fan of MK-V on facebook

Think you meant to write "ceased" :-) Hi Erwin (how are you, good to see you at NAB) Hi Lawrence (how are you? look forward to seeing you soon) The Handsfree are still very much in production in fact the latest model, with the hard mount, we had at NAB is stunning. Both options (lean and steer) are still available, however (Erwin) you are right and maybe confusing the original version of the Segway (XT) for the pedals is not longer made, but there are 1,000's still available. And all the parts, Batteries etc are still available. The new lean version is very simple to use and allows the op to step off from the front or back (or both) and the unit just sits there waiting - amazing. If anyone would like any info regarding the Handsfree or anything MK-V please email me off forum. howard@mk-v.com See you all at Cinegear! All the best Howard

:unsure: Hi Jens Thank you... Spelling was never my thing... B) Cheers H

MK-V Australia Hi Guys I am Very proud to announce the opening of MK-V Australia This has been set up to help service and support the ‘other side of the world’ better. We are also agents for a number of wonderful products, inc the Handsfree Transporters. For more information please email myself or Richard Jones at aus@mk-v.com The New office for MK-V USA has proved to be a big hit, with lots of new and old customers visiting from all over the world. Some of our new Nexus customers include, Bob Gorelick, Randy Nolen, Jerome Fauci, Brian Nordheim, and 2nd or 4th systems for Stephen Consentino and Mike OShea. And as before we offer full service and upgrades on ALL systems, inc PRO, EFP, MK3/3a and even the Provid. If anyone would like any information about MK-V or any of its products and services, please email me at howard@mk-v.com or call me at +1 310 804 0973 I look forward to hearing from you and seeing you all at Cinegear. All the best Howard Become a fan of MK-V on Facebook.

MK-V Group Exclusive agents for the Handsfree Transporter. I am Very proud to announce that the MK-V Group; MK-V USA, MK-V ASIA and the new MK-V Australia are exclusive agents for the excellent Handsfree transporter. And MK-V Europe is the Exclusive UK agent for these systems. Please see www.mk-v.com for more details (http://www.mk-v.com/?cat=188) If anyone has any questions re anything to do with MK-V and its products please email or call me. howard@mk-v.com +1 310 804 0973 I look forward to hearing from you and seeing you all soon at Cinegear 2010! Become a fan of MK-V on Facebook. All the best Howard

New MK-V Offices Hi Guys I am very proud to announce our new offices for both MK-V Europe Ltd and MK-V USA LLC MK-V Europe Ltd MediaCity UK, The Pie Factory 101 Broadway Salford Manchester M50 2EQ +44 (0)161 850 0658 (New Number) and MK-V USA LLC 7E Herman Drive Simsbury CT, 06070 USA tel: +1 310 804 0973 I will be holding workshops in the USA now – please email me for details. (MK-V ASIA Ltd is based in Hong Kong.) Please email me for any information. howard@mk-v.com Please also visit the website www.mk-v.com And please email me any photos of you and your MK-V in action. All the best for 2010! Howard

As a tribute to Jeff, I have started a Page on my site - http://www.mk-v.com/?p=982 If anyone has any stories or photos they would like to share please email me off forum. H

Hi Nelson Yes he was...