william west

Second Hand Ward Sniper kit for sale - was serviced at the end of 2018 by manufacturer and has barely been used since as I have been using the Cine RT and very rarely find an occasion to use the Sniper. Can ship worldwide ex New Zealand $6000 USD Contact henwest@gmail.com if interested. FT- 810-2.pdf Sniper[4137].pdf

Sold

This is a complete kit ready to go onto any production, It includes a single channel controller, wireless Microforce and any cables you will need plus spares. Kit is currently in New Zealand but international shipping can be arranged. Due to restrictions on shipping batteries the kit will come without any batteries but there are 2 chargers. The kit is housed in 2 x Pelican Storm 2300 cases, one laser cut for the essentials and the other for back up items. $22000 Main Components: 1 x HU3 1 x MDR3 1 x Focus/Iris Single channel Handest 1 x Digital Microforce 2 1 x Radio microforce module. 1 x DM1X Motor 2 x DM2 Motors. Cables: RS Power (Arri 3 pin) RS Run RS "Y" Cable D Tap Power x 2 Epic Run x 2 F55 Run x 2 PV 12 volt x 1 PV 24 volt x 1 Cinetape Interface cable. Motor x 4 Misc: 8 X Iris handset discs Hill PV mounting bracket 15mm Hill Rosette Mount 15mm Camera essentials weather cover. PV Zoom and PV Iris pitch motor gears. $22000

Has anyone had success using a sniper readout through a WCU4 handset with an Alexa 65 /XT/LF camera? I can get it to work on a mini using an Lcube and cable but have had no luck with a sniper to EXT Alexa cable. A cinetape cable made to the same pins works but for some reason it wont work with the sniper Data stream? Henry West 1st AC NZ

Do you have an email contact to purchase these?They look great! Henry West

PRO Greenscreen Monitor (Standard Def) Hasn't been used for 2-3 years since HD took over but recently tested it and it fires up fine - see photo. Slight discoloring of glass around the edges but this is not visible once turned on and looking at an image. Great for anyone still working with film cameras (Anyone out there?!) It was serviced by PRO in October 2010 and had a new power supply installed. Comes with 1 x PRO 8 pin monitor cable I can Also throw in a red byte decimator down converter if you are interested. Make me an offer. Happy to ship worldwide from New Zealand Henry West

Hi Lee, I would be very interested - how old is the IR Unit? regards Henry West

Has any one else out there ordered the new "cineranger" from Cinetronic? I was looking forward to trying it out and ordered one a month ago but so far apparently Chris is still waiting on parts. I didn't realise that they were not actually in stock when I paid for it and this was never made clear, personally I don't like to spend money unless I get something I can use in return. I am hoping it will be ready for shipping soon but so far it has been 3 weeks of "we will have the parts next week" I would be interested to hear if anyone else is waiting for the same thing, having since looked up Cinetronic on the forum it appears this is not uncommon...

Thanks Tommy I appreciate your thoughts - yes I have been in touch with PRO and they do not recommend using the mod for the same reason. I will just change the rod ends regularly from now...

Thanks Martin yep that does make sense now you put it like that, always interested to hear other opinions too! Henry

Has anyone used this piece from Walter Klassen on their pro arm? I am looking for a way to remove the rod end's from the pro arm which have been prone to breaking (albeit when the arm has been used in the wrong orientation) This mod looks good but I am unsure of how the arm still functions without the pivot point in the standard pro socket block (where it is sprung back) I would be interested to hear from any one that has used it... Henry West NZ

Has anyone out there had a problem with Bolt transmitters and bluetooth interference? Im not an expert but would be interested to know if the two systems can cause problems. I am on a show where we are having constant problems with our bolt loosing video signal periodically and the only new thing in the equation is a heden "Carat" bluetooth focus sytem - would love to know if anyone has used these 2 thing together with any problems before? Cjeers Henry West 1st AC NZ

Hi there, can you email me at henwest@gmail.com - I'm interested in suspender rig. Cheers Henry West

SOLD thanks

SOLD Thanks

Still for sale! Used Steadyrig silver spring arm for sale, $6500 USD 3 years old has been great but have finally upgraded to PRO arm. Some minor pitting/surface rust on some of the arm trunions (see photo) but this is cosmetic only. Comes with 1 x 6" long 5/8" arm post, Steadyrig arm tool and a padded arm bag. Arm is in New Zealand but I will ship anywhere worldwide.

Old Marell monitor - was a back up for a while but now redundant. Tested and works fine although really only good as an indoor monitor. Has Pro type mount (not the bracket though) and 1 x 8pin R/Angle lead to fit a pro sled if useful. $350 ONO

Ive just had the HD upgrade on my PRO sled so am left with the standard def upper and lower boxes and cable. All working fine just wont carry an HD signal. If anyone has any use for these parts make me an offer! In New Zealand but happy to ship worldwide

Selling my DB2 as I've just upgraded to a DB3 Good condition, have had no problems with it am just keeping up with the times... comes with pro "T" bracket for MDR mounting I also have an XCS bracket for mounting Preston MDR to DB2(sorry no photo yet) S/N 030 $1500 US I am in New Zealand but will ship anywhere

Used Steadyrig silver spring arm for sale, $6500 USD 3 years old has been great but have finally upgraded to PRO arm. Some minor pitting/surface rust on some of the arm trunions (see photo) but this is cosmetic only. Comes with 1 x 6" long 5/8" arm post, steadyrig arm tool and a padded arm bag. Arm is in New Zealand but I will ship anywhere worldwide.

thanks for all your feedback, have done a bit more time on the scales, my pro rig weighs in at around 21 lbs and genesis with tape deck and lens around 40 lbs so should just handle it... hopefully the tape deck on the genesis will soon be a thing of the past - so much for cameras getting lighter with technology!

Has anyone use the steadyrig silver spring arm with heavy camera packages? I am looking at getting one but it says the max load is 28.5 kgs, I weighed a genesis with tape deck on the other day and whole sled came to 29kgs! Just wondering if 28kgs is the absolute maximum or if you can get away with any more? Henry West

Does anyone know if you can get the pins to hold the focus rings on a preston handset fitted after market? I am working with an older handset which doesnt have the locating pins and wondered how easy it is to get done... (sick of marking up lenses endlesly) henry west

Hi there, am looking for a 2n hand preston kit, need to ship to nz, interested in looking at offers - keen to buy soon henry west

Can anyone tell me the model no's for the lemo and hirose connectors on the transvideo titan? I am waiting on the unit to be shipped and want to make cables up before it gets here... thanks henry