Jon Beattie

Teradek Bolt 2k w/Sidekick 2nd Generation Teradek Bolt 2k system (1) 2k Transmitter (1) 2k Receiver (1) Sidekick Reciever (4) 2 pin p-tap cables (3) ac power adapters extra antennas Hard case with foam $6400- Plus shipping System is located in Brooklyn. Has been well cared for and updated.

Mike has always been great to do business with. Thanks again. My Teradek products have always worked well and when service was needed the work was done quickly and well. I've owned 2 of the original Bolt Pro setups with multiple receivers 2 Gen1 Bolt 2k's and 3 Gen2 2k setups. Unfortunately I was told that my Gen1 2k systems could be traded for the Gen2's when they were announced. Then when they released the Gen2 2k I was then told that in fact they were not upgrade eligible. 3-5 years is a good lifecycle for a product like this. Coming out with the 3k now and not having them compatible with our current systems stings. How are your customers supposed to make a return on investment when every 6-18 months you cut the legs out from under the previous model/product? The only real competition teradek has is from another vitec brand? Advancements are great but if you keep this pace up your new products are destined to fail as the industry can't keep scrapping and flipping to new every 18 months. Maybe you guys should just come out with a housing that you commit to and offer upgraded boards etc rather then this current model.

sold

Gen 2 Teradek Bolt 2000 1- Bolt 2000 Transmitter 1- Bolt 2000 Receiver 2- P-tap power 1- 2pin - 2pin power 1- AC power Pelican Case with foam System has latest firmware. Has been well cared for and maintained. Works perfectly. In good clean cosmetic conditions with normal signs of use. $6250- Plus S&H Local pickup in NYC Wire transfer, paypal, check/money order Ready to ship as soon as payment clears. contact: jon@steadiway.com

One setup sold. The other Bolt 2k is still available. Price dropped to $5000-

Bump. Still available.

Bump Price lowered to $775-

Bump Updated new lower price and added a number of run/stop cables. $4000- plus shipping additional cables 2 x arri run/stop 1 x epic/dragon/weapon run/stop 1 x f55 run/stop 1 x pana classic run/stop

MDR 2 G4 Blue dot Receiver is 2 years old. In great condition and works perfectly. 1 x Cinetape interface cable 1 x Arri y run/stop/power cable 1 x p-tap power 1 x pro sled power 1 x mdr2 mounting bracket with dovetail $4500 plus buyer pays shipping unit located in NYC.

Selling 2 Teradek Bolt 2k (gen1) systems with 1 tx and 1 rx per setup Each Package comes with 3x Bolt P-Tap Cables 1x Bolt Lemo2 Cable 1x Bolt case $5250- Buyer pays shipping or local NYC pickup

Selling 2 Teradek Bolt 2k (gen1) systems with 1 tx and 1 rx per setup Each Package comes with 3x Bolt P-Tap Cables 1x Bolt Lemo2 Cable 1x Bolt case Buyer pays shipping or local NYC pickup

BDR Still looking for a new home

I've tried them all and believe the best out there is the Sachtler Trinity setup. It's rigid, has a high payload and is much more well thought out than the other options. Believe in it enough that i'll be taking delivery on my own in a few weeks.

Sold

1 rx still available $500- plus shipping

Unit still for sale

System still around. Price Lowered to $2400- plus shipping

V1 PLC Digital Bartech BDR receiver Unit is lightly used and in perfect working order. (3) Pro to Bartech power cables (1) ab p-tap to Bartech power cable $875- plus buyer pays shipping or local NYC pickup.

Selling a gen1 teradek bolt 300pro sdi system that includes 1 tx and 4 dual output rx. Will include case, ptap and ac power for each unit. System has latest firmware and has been well maintained. $3250- plus shipping

I'm 1 of the 2 operators Gregg mentioned that is using an ergo handle on a sachtler gimbal. When I first put the ergo handle on it'd noticed how much more the axel stuck out from the fork on the gimbal. There was also a teeny tiny bit of play from the bolt holding the axel in place. I figured it would eventually become an issue and reached out to both Gregg and curt about it. Gregg was pretty forward about believing it was an issue that could lead to a big problem. Curt was confident in being able to come up with a solution. Well sure enough after a few months the bolt bent and I was forced to put the stock handle back on. Curt asked me to send him the ergo handle and what he did was made a replacement axel for the ergo that perfectly matches the fork on the sachtler gimbal. It's now a simple kit piece that he sends when you change to the ergo or if your buying a rig you can send him an ergo and he'll put it on the rig. Myself and the other operator who also had an ergo on his sachtler -and who's handle did sheer off I his hands- have been using the ergo with new axel in our sachtler a for over a year without any issues. I've had some very large builds and done lots of vehicle work without an issue since. So there's a solution that works just contact sachtler and they'll get you squared away. I'll add that both Gregg and Curt were emediate to respond to all questions and concerns and acted quickly in working this bit of business out.

Pro focus mounting bracket $125- Pro mdr2 dovetail $125- Pro mdr3 dovetail $125- Pro bartech dovetail $35- PLC BDR epic/scarlet run/stop cable $195- Bartech gimbal controller $80- All items with execution of the bartech gimbal controller are new and unused. Buyer pays shipping. Email with questions jon@steadiway.net

1. Leanseat for gen2 Segway. This leanseat replaces the lean stick or original handlebars and always the op the ability to sit and lean. Will work with standard and deluxe saddle.Note that it does not come with the saddle. $850 1. Fixed seat mount for gen2 Segway. This seat can be added and used with existing modified standard and deluxe lean sticks. It mounts around and bolts onto Segway. $450 Buyer pays shipping. Email me with question jon@steadiway.net

Had my new bolt 2000 on set yesterday and was really impressed. System linked up quickly <10 seconds. Had rx in 3rd floor of an apt building with tx on the street. Going downstairs and onto street system never broke up, no noise or artifacts. It just worked seamlessly. Didn't get a chance to test the full range for distance. We were also filming under elevated subway line in Williamsburg around Hewes and Broadway- any op in NYC knows this location. At times there was 200-300 yards between tx & rx -with plenty of bodies I between- again no issues or break ups. Not a scientific test and there wasn't another system there to do a side by side but in a real word application the system preformed perfectly and without any issue of announce. The size of the system is great for us and the rx is equally at home in a village build or as handheld setup. The design, machining and layout are smart and well done. Have been a happy bolt pro owner. Now I'm grinning ear to ear with the bolt 2000 but even better so were the DP & Director.

last one

another