Jump to content

Jamie Hammond

Premium Members
  • Posts

    74
  • Joined

  • Last visited

Everything posted by Jamie Hammond

  1. Now listed on Ebay http://www.ebay.co.uk/itm/181252588054?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 J 181252588054
  2. Ive been out of the Steadicam game for a while now but have been going through my lock up and found a couple of Magliner gemini-esque base trolleys. A while back I built a magliner clone called the JCart and these where a couple of bases that where un-sold from the last batch. They look very similar to the gemini and the front handles fold up to be used as a sack barrow as well as forming the basis of the trolley. I used a wooden board which was covered in rubber matting and had a top tray fabricated to attach to a magliner folding nose. These could be very easily converted into a JCart for a far cheaper price than a new Magliner, especially over here in the UK. I have some rubber matting left over which I could throw in as well if somebody wanted to take a punt. Im looking at £200 each and I have two for sale. drop me an email or message me here if your interested. Best Jamie Note: Image shows trolley with base board, folding nose and top tray which are not included.
  3. Ive been out of the Steadicam game for a while now but have been going through my lock up and found a couple of Magliner gemini-esque base trolleys. A while back I built a magliner clone called the JCart and these where a couple of bases that where un-sold from the last batch. They look very similar to the gemini and the front handles fold up to be used as a sack barrow as well as forming the basis of the trolley. I used a wooden board which was covered in rubber matting and had a top tray fabricated to attach to a magliner folding nose. These could be very easily converted into a JCart for a far cheaper price than a new Magliner, especially over here in the UK. I have some rubber matting left over which I could throw in as well if somebody wanted to take a punt. Im looking at £200 each and I have two for sale. drop me an email or message me here if your interested. Best Jamie Note: Image shows trolley with base board, folding nose and top tray which are not included.
  4. Both still for sale. Transvideo Im assured by the previous owner that it is the 1400nits model.
  5. Hi Norbert, You got me thinking with that question. I checked back through my correspondence with the previous owner and he assured me it was the 1400nit version and i have no reason to disbelieve him. I will drop an email to Transvideo with the serial number just to double check. Best J
  6. Hi, I have a Transvideo Cine 3 Superbright monitor and J7 zoom control for sale. The Transvideo is in good condition and has a wealth of options including multi-standard, auto-flip and reverse, battery meter, Green/Black and white/ Color options and much more. This is a great SD monitor and comes with a custom hirose to BNC and 4pin XLR power cable. The cable was made for my Master rig so I could switch easily between this and the CRT. £700 obo Buyer pays shipping The J7 is in good condition and has two run options, a button or a switch. Tried and tested in good working condition. £300 obo Buyer pays shipping
  7. Hi Alex, Looks like you were right, they are both run switches. Tried changing the direction of the button before plugging in and that stopped it from running the camera when plugging in. Many thanks, I can happily list the remote. best J
  8. I'm just clearing out a load of kit and came across a J7 Zoom control with Fuji pins. Im looking to sell this in the very near future so plugged it into one of my cameras to check it out. The zoom works perfectly and the start/stop button works fine. My query is that when I plug the cable in for the first time it runs the camera. I can turn it off with the switch and everything works fine from then on, its just that initial input that seems to set the run off. Is this normal? I would have presumed that the switch was also a direction changer for the controller but at the moment it isnt doing that. without the manual Im a little blind and wouldn't want to sell knowing it had a possible fault. Any help much appreciated. J
  9. SOLD. Although Transvideo and Master cable still available. Will post in new thread soon.
  10. Still for sale, I will now add a brand new Decimator 2 to the package, so no HD worries. J
  11. Still for sale. Will consider a part ex for a smaller system. Also have Magliner with monitor and dock spigots that I can sell to the buyer, or if rig sells. Zoom controllers also available and can be part of deal.
  12. FULL MASTER KIT INCLUDING ARM, SLED, KLASSEN VEST, TRANSVIDEO CINE 3A Amendment to original listing with the addition of a Klassen vest in excellent condition.Still selling my Master arm and sled including my Transvideo cine 3a LCD and includes the following: Steadicam Master Sled with 4" 16"9 CRT Green Screen Frame line Generator ( bottom frame line doesn't move to bottom of frame, but stays within safe area) Transvideo Cine3a Ultrabrite LCD, with bracket and cable. Master to BNC/Power cable, DA with video out and 12v power out Flight case Power cables BNC's Tool Kit Docking Bracket Dovetail plate Low mode clamp and small Dovetail plate Tally light sensor Flights Case with wheels 4 x Pag Batteries, Charger and flight case Master Arm In good working and cosmetic condition. It has one small cosmetic fault, shown in the third picture, where one of the spring shield screws has broken its connection. This does not affect the performance or security of the sheied or the arm at all. The arm also comes with: Soft bag F bracket Rain Covers Walter Klassen Vest Suit 32" Waist Height 5.10' -6.1" approx in excellent condition I will also throw in a custom weight cage for DSLR and other light weight cameras. £10500+VAT in the UK unless you are in Europe and are VAT registered.
×
×
  • Create New...