Glenn Clayton

SOLD!

SOS Plate was sold separately so it is no longer part of the sale.

New Price without SOS plate.

$12,000 USD + Shipping. OBO

PRICE REDUCED

$12,500 USD + Shipping. OBO

MUST GO! Any reasonable offers considered.

PRICE REDUCED

$13,000 USD + Shipping. OBO

Ready for immediate shipping.

PRICE REDUCED.

$2,250 USD + Shipping

NOTE: No longer coming with steadicam bracket.

Located Melbourne, Australia

UPDATE - Now ready for immediate shipping.

Sale fell through. STILL AVAILABLE!

SALE PENDING

AVAILABLE FROM DECEMBER 1^st, 2022

Upgrading to the Artemis 2 sled so selling my original Artemis 1 sled (formally from Sachtler before ARRI purchased the range). Selling with cables, additional plate with AC support, c-stand and SOS plate. Upgraded power for both 12/24 volt cameras. The top stage and upper junction box were recently serviced at ARRI Australia (July, 2022). Comes in a Pelican luggage case for convenient travel. The travel case weighs 23kgs (50.7lbs) with a c-stand hidden in the lid. 3^rd battery hanger for the lower sled is included but not pictured.

TIFFEN VOLT READY AND COMPATIBLE (…despite what Tiffen says). I’ve been running the M2 Volt on it for the past year without problems. [photo attached but Volt not included]

 

·         1 x ARRI Artemis EFP Pro HD-SDI 12/24 volt 1.5" post

·         1 x Transvideo Cinemonitor HD6 Classic

·         1 x Pelican Elite 30” Luggage [DISCONTINUED] (custom foam inside)

·         1 x Avenger C-stand with turtle base (black)

·         1 x Sachtler docking bracket

·         1 x SOS plate

·         2 x ARRI baseplates (including 1 x 15mm AC support rails)

·         1 x Follow Focus Bracket

·         1 x ARRI post tool

·         1 x cam power cable, Artemis EFP Pro > ARRI Alexa Mini, Mini LF, Amira 12V

·         1 x cam power cable, Artemis EFP Pro > Panavision

·         1 x cam power cable, Artemis EFP Pro > 12-volt Camera XLR

·         1 x accessories power cable, Artemis EFP Pro > 4-pin XLR

·         1 x accessories power cable, Artemis EFP Pro > Transvideo HD6 Monitor

·         1 x accessories power cable, Artemis EFP Pro > 2-pin LEMO

·         1 x BNC Analog video cable for Transvideo HD6

 

Preston HU2 & MDR2 w/ 2 motors for SALE

$3,500 USD OBO + shipping

In excellent working condition. Selling due to lack of use. Built like a tank and always reliable.

KIT:
- HU2 w/ Omnishot Battery System
- MDR2
- Battery charger
- 3 smaller batteries & 2 larger batteries
- 2 x motors
- 3 x motor gear rings
- 2 x motor brackets
- 3 x bracket inserts
- Steadicam bracket
- 12 x marker rings
- spare antennas

CABLES:
- 4 x motor cables (2 x right angle cables, 2 x long straight cables)
- 1 x Preston power to 4-pin XLR
- 1 x Preston power to 3-pin half/moon LEMO
- 1 x ARRI Run/Stop cable
- 1 x RED Run/Stop cable

Pelican 1550 Case

info@glennclayton.com
BASED MELBOURNE, AUSTRALIA

Hey everyone,

I'm selling my old Transvideo HD6 SuperBright monitor (original generation version) along with a steadicam bracket. Bracket originally from Sachtler. 

Monitor is good working order but probably needs a software upgrade. I don't have the right connector for it.

Asking $1,600 USD (OBO) + Shipping

Based in Melbourne, Australia.

info@glennclayton.com

Glenn

BUMP $800USD + Shipping

ARRI Artemis (previously Sachtler) monitor bracket for Transvideo Cinemonitor HD6.

900 USD + SHIPPING

Location - Melbourne, Australia

info@glennclayton.com

Hey Dale,

Please let me know if you start accepting international offers. This would be perfect for me. I'm located in Melbourne, Australia.

Cheers,
Glenn

info@glennclayton.com

Absolute Legend!

Thanks heaps Corey! That is exactly what I am after.

My local rental house has this great little hot shoe mount for the ARRI mini EVF which allows me to position the EVF centrally on the back of the camera handle.

*PHOTOS ATTACHED*

I really want to buy one to keep in my kit for the DP’s that demand that the EVF remain on the camera.

Does anyone know where I can get one?

BUMP - $36,000USD + SHIPPING (batteries not included)

Still available

BUMP - $40,000USD + SHIPPING

STILL AVAILABLE

Just got serviced. Everything is A-okay!

Correct. It's perfect for travel. The whole case comes to 24kg!

FULL KIT. READY TO GO!

Upgraded to allow 12/24volt power.

The kit includes -

STEADICAM KIT -

* Sachtler Artemis EFP Pro HD-SDI (12volt & 24 volt)

* Transvideo CineMonitor HD6 SuperBright

* SteadyRig Silver Spring Arm (13-63lbs / 5.9-28.6kg)

* Steadicam Master Series Vest

* Preston HU2 w/ 2 x DM1 motors (11 focus rings)

* IDX CamWaves HD v-lock

* 9 x V-lock batteries (‘4 x 230Wh’ ‘3 x 160Wh’ ‘2 x 95Wh’)

* 4 block charging station

* post extension & J-bracket

* wet weather gear for vest, arm, monitor, steadicam docking cover & sun guard

* 2 x baseplates (including one with 15mm AC support rails)

* 4 x camera screws, 2 x custom Alexa screws, various BNC adapters

* vehicle mounts w/ scaffold u-bolts (2 inch)

* travel case w/ c-stand hidden inside lid (with EXTRA sex appeal)

 

Cables -

STEADICAM CABLES:

Steadicam to Panavision power cable

2 x Steadicam to Monitor cable (2-pin lemo – 4-pin XLR ‘12-volt’)

Analogue monitor cable (BNC – 8-pin lemo)

‘12-volt’ Steadicam to Camera cable

‘24-volt’ Steadicam to Camera cable

’12-volt’ Steadicam to 4-pin XLR

Steadicam to Bartech power

 

PRESTON CABLES:

4 x Preston to motor cable (2 straight, 2 right-angle)

Steadicam to Preston power cable

D-tap to Preston power cable

ALEXA Run/Stop cable

 

$42,000USD + shipping from Melbourne, Australia.

 

PHOTOS ATTACHED (IDX CAMWAVES INCLUDED, I was unable to attach a photo due to size)

 

Glenn Clayton

info@glennclayton.com

FINAL OPPORTUNITY!

NOW $1,500US per/month. 12 month lease. (available from end of November / start of December)

PLUS shipping ($800US) & insurance.

BUMP!

NOW $1,600 per/month (available from end of November / start of December)

HEY!

Rare opportunity for a new operator who isn't sure if they want invest in big rig or for an operator who needs a backup rig. I've just started a business with a friend and I'm looking to take the next year away from the film industry to give the start-up business my full attention. Subsequently, I'm testing the water to see if anyone is interested in doing a yearly hire of my full steadicam kit.

The kit includes -
Steadicam Kit -
* Sachtler Artemis EFP Pro HD-SDI (12volt & 24 volt)
* Transvideo CineMonitor HD6 SuperBright
* SteadyRig Silver Spring Arm (13-63lbs / 5.9-28.6kg)
* Steadicam Master Series Vest
* Preston HU2 w/ 2 x DM1 motors (11 focus rings)
* IDX CamWaves HD v-lock
* 9 x V-lock batteries (‘4 x 230Wh’ ‘3 x 160Wh’ ‘2 x 95Wh’)
* 4 block charging station
* post extension & J-bracket
* wet weather gear for vest, arm, monitor, steadicam docking cover & sun guard
* 2 x baseplates (including one with 15mm AC support rails)
* 4 x camera screws, 2 x custom Alexa screws, various BNC adapters
* vehicle mounts w/ scaffold u-bolts (2 inch)
* travel case w/ c-stand hidden inside lid (with EXTRA sex appeal)

Cables -
STEADICAM CABLES:
Steadicam to Panavision power cable
2 x Steadicam to Monitor cable (2-pin lemo – 4-pin XLR ‘12-volt’)
Analogue monitor cable (BNC – 8-pin lemo)
‘12-volt’ Steadicam to Camera cable
‘24-volt’ Steadicam to Camera cable
’12-volt’ Steadicam to 4-pin XLR
Steadicam to Bartech power

PRESTON CABLES:
4 x Preston to motor cable (2 straight, 2 right-angle)
Steadicam to Preston power cable
D-tap to Preston power cable
ALEXA Run/Stop cable

PHOTOS ATTACHED

12 month contract, US$1,700 per/month, paid monthly (PLUS shipping & insurance). Available from August!

Feel free to contact me with questions or for more information.

Cheers,
Glenn Clayton

info@glennclayton.com

.........the anticipation is killing me!!!