RustyGeller

For Sale: PRO II monitor with brand new PRO 3rd generation High and Low Voltage power supplies (1 year GPI warranty on new parts). Includes bracket and cable $9750 obo. Contact: rustygeller@bigpond.com AND gellers4@hotmail.com (I'll be travelling Stateside from 12-19 to 1-18, so please send to both addreses)

PRO II monitor for sale, currently at GPI having new 3rd Generation High and Low voltage supplies installed. Includes cable. Available late December or early January. $9750. Contact Rusty at rustygeller@bigpond.com or thru website www.rustygeller.com

I just finished a 6 month shoot on a DigiBetacam, using my Modulus 3000 on the Steadicam, and we didn't have any problems with RF hitting the tapeheads. We used the -10db pad about 20% of the time, only when the rig was close to the director's monitor and the monitor fluttered from too much signal. We mounted the Modulus on top of the lomode plate, except when in lomode when it went between the bottom battery and the sled (PRO 2). The show is now airing and I've watched the first 8 episodes. I don't see any difference in quality of the Steadicam and non-Steadicam shots.

FYI, this is the reply I got from Aaton.: Bonjour, Yes you can. There is no problem attaching a low mode plate to the 16 handle. What model of camera is it exactly ? XTR ?, XTR Prod ? In case of a XTR, I would check that the four screws, holding the viewfinder to the camera front housing, are screwed into four steel inserts, instead of being screwed directly on the front housing cast aluminum. The Prod has the four inserts, no need to check. Best Regards Pierre Michoud Aaton service dept

What's the scoop on flying an Aaton LTR in lo-mode? If I attach a plate to the built-in handle, will it support the camera safely? I've flown 35 Aatons this way, but those belonged to Panavison and these belong to people who are my friends.