jeromefauci

Other DM-1x and Dm-2 motors and spare cables can be mixed and match to this kit- for additional

THE PHOTOS FOR THIS KIT are shown at the post below

Every Year my rental house sells a couple of these FIZ kits-less than a year old to keep our inventory new and our accountant happy- This kit was a backup for a crane kit- it looks and works like brand new- guaranteed . PRESTON FIZ 3 Kit Includes: Preston Hand Unit 3 ( Part # 4060-G4): (w/ 6 rings, FOUR Li Batteries, charger, grip quick release, with G-4 Transceiver) also includes Shoulder Strap. Preston MDR 3 ( # 4110): 4 Channel Motor Drive ( W/ mini usb to usb cable) ONE -MDR3 power cable from Arri 3 pin (alexa, mini etc) ONE- MDR3 power cable from ptap ( red camera, Sony, etc) ONE- Arri Alexa RUN cable from MDR3 ( Alexa, mini, etc) Microforce V+F2 : w/ cable and bracket for HU3 This Microforce can be used with your Hand Unit and Digital motors or alone with hedans on a fluid head or rock and roll handle- Preston Motors: DM1 X2 Preston Motor cables X2 Preston Motor Brackets X2 with adjustable 19mm or 15 mm collars- One 6" Dog Leg motor Mount One 3" Dog Leg motor mount One Full PAM set with adjustable 19mm or 15 mm collars One Iris/Video pitch gear with screws Inner Space Case with foam organizers $20,795.00 contact by email ONLY: jeromefauci@me.com

Every Year my rental house sells a couple of these FIZ kits-less than a year old to keep our inventory new and our accountant happy- This kit was a backup for a crane kit- it looks and works like brand new- guaranteed . PRESTON FIZ 3 Kit Includes: Preston Hand Unit 3 ( Part # 4060-G4): (w/ 6 rings, FOUR Li Batteries, charger, grip quick release, with G-4 Transceiver) also includes Shoulder Strap. Preston MDR 3 ( # 4110): 4 Channel Motor Drive ( W/ mini usb to usb cable) ONE -MDR3 power cable from Arri 3 pin (alexa, mini etc) ONE- MDR3 power cable from ptap ( red camera, Sony, etc) ONE- Arri Alexa RUN cable from MDR3 ( Alexa, mini, etc) Microforce V+F2 : w/ cable and bracket for HU3 This Microforce can be used with your Hand Unit and Digital motors or alone with hedans on a fluid head or rock and roll handle- Preston Motors: DM1 X2 Preston Motor cables X2 Preston Motor Brackets X2 with adjustable 19mm or 15 mm collars- One 6" Dog Leg motor Mount One 3" Dog Leg motor mount One Full PAM set with adjustable 19mm or 15 mm collars One Iris/Video pitch gear with screws Inner Space Case with foam organizers $20,795.00 contact by email ONLY: jeromefauci@me.com

Tim We have met before - I was running gocamerasupport.com for your gear on Army Wives- Ques: would you take 450.00 for the shark fin and the camera grips? contact me at : jeromefauci@me.com

Mathieu: If you'd take 1300.00 please contact me : jeromefauci@me.com

Mathieu Please contact me at :jeromefauci@me.com I'm Interested

Preston MDR Power Cable #4424 $68.00 Preston Panavision MDR Power cable (4FT.) # 4422 $78.00 Preston Genesis MDR Power Cable # 4438 $68.00 Preston Panavision MDR2 Power Cable (#4472) $75.00 Use the Cable as is or use the Lemo Connectors to make cables for any MDR series unit- EMAIL Only: jeromefauci@me.com

can you contact me on: jeromefauci@me.com would like to make an offer

Please email me Since I don't really check the soa site much jeromefauci@me.com

Please email me Since I don't really check the soa site much jeromefauci@me.com

Take 75.00 for it? Can pay pal u right now?

SOLD - Thanks

Steadicam Antlers- I always carry them for a quick way to tame a sudden gust of wind -or a really bumpy hard-mount assignment - Plus, unlike , My gyros, I don't need to stop the shooting process and have the inevitable hour -long meeting with the director and the paranoid sound mixer ! I think I Solved the "quick -draw" problem of these awkwardly shaped gear , as well- The entire Antler kit-stays built in my Impact- proof PVC case, which is small enough to keep on my cart. This set of Antlers come with everything that you'd get if you bought them new: ONE Set Of Light- weight donuts One Set of Heavy -weight Donuts Three risers- from 2" to 8"- (not the telescopic riser!) Antler dove-tail base plate with quick on/and off ---tool-less adjustments I have added , as a bonus , a dove tail Camera Plate That fits PRO and MKV and most Top stages on most Sled ( the Plate alone is worth 250.00) So--- your Antlers can live on this plate -and can always be at the ready - making it that much faster to use these pups in the heat of battle. I also added the only T-Handle Allen key tool you'll need to change out the donut weights. and a handy hard covered case that holds the donuts , tools and rises. This kit is really designed to be installed on your rig really fast and really discreetly --even before video village even notices that the wind picked up! I have included the User Manual and my own notes on where and when these bad boys should be used. They really do work well- selling them -b/c I had a pair on each coast- which I thought was a tad indulgent- They go for almost 1000.00 new- I've added the 250.00 camera plate, T-Handle, small hardcore and bulliet proof quick-draw travel case. They are in perfect shape - no dents or wear, with only a few small cosmetic scratches. Asking $695.00 Email ONLY---interest and questions to : jeromefauci@me.com I

This O'Conner 2575-C Ultimate Fluid head has been used only in our prep room- so It hardly has a scratch on it. It has just been sent to O'Connor to be checked out , tuned-up, and tested. And it has a 90 day guarantee from that service, that this head will preform flawlessly. It Includes : A Mitchell Base Plate A Euro Plate and Quick Release plate for any camera A Like- New Interspace Anvil Case An AC Front Box Quick- release mount A Two- Stage O'Connor Pan Handle (30 degree /12" plus a Pan handle extension (11") ALSO: A Preston Microforce quick release and rosette handle that attaches the Oconnor Handle for use with any Preston Zoom Microforce (worth $300.00) A rubberized Mitchell Tie -Down screw It also comes with a New High Hat mount with Plywood base AND a Low Hat Mount with Plywood Base (worth over $600.00) This kit is worth over 12,000.00- Asking $9,195.00 EMAIL INQUIRIES ONLY : jeromefauci@me.com

Needs to be in good cond- Needs to have a Mitchell Plate base- needs to have Europlate , Handles and case. Will you consider trading it for an O'Connor 2575-C? -its just been service and is under service warantee- it includes all accessories - and case- reason for selling- I have a rental house so I need to have all of the current gear Please contact Jerome Fauci email only: jeromefauci@me.com

Thanks for interest- but the pending sale finally went thru J

SOLD

Sale Pending.....

This Focus/Iris Unit Kit includes: (#4024-G4) Focus/Iris Unit with TWO FM-50 Batteries, Charger, TWO RINGS, Shoulder Strap, case, AND A Protective Mount( Which attaches to a C-stand or DIT cart and keeps the unit out of Harms way) This unit was bought six months ago and is still under Preston Warranty - With Preston's long waiting list and their inevitable price increase this spring the price is firm $4275.00 Contact by email Only: jeromefauci@me.com

This Preston FIZ kits includes: 1- (#4060-G4) Hand Unit 3 (w/Six Rings, 2 Li Batteries, New style Charger, Grip Quick Release with G4 transceiver , Shoulder Strap and Manual 2- (#4110) MDR-3-- FOUR Channel Motor Driver (with mini USB to USB cable) 3- DM-1x2 Preston Motors-with original Preston 15mm rods, AND with 2 Full Hill Pam mounts (rosettes, D-rings, Pam arms -19mm), They also include TWO Preston Motor Cables. The Hu3 and MDR3 are one year old and in like-new condition- they have just last warranty check-up three weeks ago. This kit was my personal Fiz Kit with my rig- that is hardly taken out of the case, now that all of the ACs I work with have their own- With Preston's waiting list at 6 to 7 months long, and in anticipation of their annual Spring price increase-the price is firm $18,590.00 contact thru email only: jeromefauci@me.com

An Extra Docking Bracket Set for your kit, complete with Standby Cover- Just put the Hill Mag-Dock Docking bracket with its 5/8 stud receiver on your cart, mag-liner, a self-made moses pole, in the Camera truck or on any C-stand- Connect the Mag-Dock 2 to Hill's Balance Bracket and you would have a complete Hill Docking Bracket Head The Mag-Dock comes with ONE Ring- You choose either a 2.000 or a 1.860 Ring Also, as mentioned , comes with a Large Hill Stand-By cover- its definitely been used as the dirt will show, but has no holes, and is able to cover your complete rig with any camera, mag or lens This kit cost over 700.00 new ASKING $485.00 Contact me by email only: jeromefauci@me.com

This G-Zoom is compatible with most Canon and Fuji Lenses as well as Focus-This unit will also control focus (hardware) via Bartech Focus Device- The unit can adjust zoom speeds, and switch zoom control in either direction- There is also a direction switch for focus direction too. This is a great tool when using video lens- be it with a video shoot or a Episodic or Feature shoot ( w/ an HD camera with a canon or Fuji Lens) Think about -being able to zoom past a piece of furniture in your way- or adding a zoom buried in your pushing-in move- very tasty ! I used this a couple of times on a TV show that wanted the steadicam to look like a Sports Video Camera- I was really impress what it could do- and I got pretty good at keeping things in focus-( Don't the tell my First AC ;) ) I bought every cable for every lens for fuji and canon It cost me over 1400.00 ASKing 795.00 GZOOM Kit includes: G-Zoom Custom Edition unit w/ 2.5 ft. focus and zoom cable ONE Canon 8 pin to Canon 20 pin ONE Canon 8 pin female to Fuji 12 Male Zoom Adapter ONE Canon 8 pin to Fuji 8 pin Male Zoom Adapter Manual/instructions Original Pelican Case Contact : jeromefauci@me.com

Is the bracket still available- please email me if it is: jeromefauci@me.com

Ever catch your 2nd AC storing your precious Sled on the Camera Truck's shelf overnight with a furniture pad and a couple of sad bags? (why does my post look funny?) Or Did you buy a $500.00 custom made piece of 3' x 6' x 10" foam that fits the camera Truck shelf perfectly only to have some guy spill his latte on it, or throw a 75 lbs Lambda Head on top of it? ( time to buy another cable of MDR antenna ) Keep Your Sled Safe and Secure- mounted the way it was suppose to be- Right side up! And out of the way of rolling carts and sound gear. This doubled mounted wall mount easy screws on to the wall of the Camera Truck's darkroom or the end of the one of the Camera Truck's shelves- where it locks into place- leaving your monitor bracket, post, jboxes, etc, unbent and safe- and any cable free of damaged lemos and dislodged video bnc mounts This mount stores your Sled in seconds at the end of the day with everything on board and built( Your AC likes that) and safe- with TWO Gorelock/Hill mounting brackets- connected to this ingenious double mounted wall bracket- ( your accountant likes that) You can even remove - one of the 2 Gorelocks for your stand or cart and leave Just one on the wall brackets for quick storage- returning to double lock at the end of the day's work The Wall Bracket Includes: TWO Gorelock (GAD) Docking brackets (lists new for 1500.00) TWO GAD Rings (lists new for 170.00) ONE Hill Standby Cover (lists new for 89.95) ONE Custom Made Wall Mount Machine from solid Aluminum/Anodized block with TWO 5/8 Mounting Pins that are adjustable I have TWO- Only need ONE ASKING$ 1,685.00 or b/o Email me : jeromefauci@me.com