Ben Rowsell

bump, open to offers

all sold

CML motors and AMC still available

Hi, yes I believe it is, but I never used that functionality. will check out tomorrow as I will have it on set

bump, single motor remaining

bump

M26VE Standard Sold, M26VE High Torque still available

Price drop $1600

M26VE Standard sale pending

Cforce Plus sold, open to offers on other items

M21VE sold, 2 others available

Original Transvideo Stargate full HD resolution monitor. Comes with: 1 X Transvideo "noga" arm 1 X backup Transvideo arm plate for monitor end (used this with Ultralite arm, has 1/4" thread) 2 X RS Power cables to straight XLR 1 X Lemo 2 Pin power cable to elbow XLR 2 X Ptap power cable (1 to elbow XLR, 1 to straight) 2 x BNC cables 1 x monitor soft cover 1 x magnetic screen protector I don't have the original case available, but I do have the cutout foam, and can ship this with everything in a pelican case, or can package down depending on your preference. Asking $1800 obo Note: Zoom button is sometimes sticky, this has not been an issue for me as I never zoom the image. Is on firmware as shown in the photos, I have never needed to upgrade. Shipping from New Zealand Note: not all cables shown in photos due to upload limits

M21VE sale pending, 2 X M26VE still available

Bump, open to offers

1 X M26VE (Stanard), 1 X M26VE (High Torque model), 1 X M21VE M26VE Standard: Full Set of 4 X gears (0.8, 0.6, 0.5, 0.4), 19mm Rod bracket with 15mm inset. Asking $1000 M26VE High Torque: Full Set of 4 X gears (0.8, 0.6, 0.5, 0.4), 19mm Rod bracket with 15mm inset - note: in the photo the 0.8 gear is worn, this will be replaced with a new gear. Asking $1000 M21VE: Note: this is the standard smaller M21 motor, not the "L" version. I don't have a complete gear set for this, the 4 gears are included however they are missing the centre metal spindle, so these will have to be sourced, or perhaps you already have some. Also has 19mm rod bracket but no 15mm inset. Asking $500 Also available another full set of gears for the M26 motors including: 1 x 0.8, 1 x 0.6, 1 x 0.5, 1 x 0.4, 1 x 0.8 Wide, 1 x 0.8 Oversize diameter wide with offset. Shipping from New Zealand

This gear is now sold, I have more motors and will create a new listing

sold

Purchased new but only used once, otherwise in storage as backup unit. Still a current model: http://www.tvlogic.tv/new/M_Spec.asp?sidx=101 Selling new on B&H for $985.50 + Cables Comes with P-Tap Power & 2 X Lemo 2 Pin Power (Arri Polarity) Still in original packaging Asking $500 Shipping from New Zealand

Cforce Plus: Used but not extensively. (mostly went for the smaller mini & RF motors) Will come with 15mm rod inset and 0.8 pitch gear as "Basic Set". New price on B&H is $3360. Asking price $2000 obo AMC-1: Brought as backup system but have never needed, so more or less new. Used a handful of times to setup a discrete motor for a rota Pola, but otherwise it's been in storage from new. Comes with mounting bracket and the following cables: Hirose Cable for Sony Ptap Power Alexa Mini EXT Power/Run 3 Pin Fisher RS Power/Run Red Power/Run (Split to Ptap+Lemo 00 4 Pin) New price on B&H is $2690 + around $200 each for cables plus the bracket, so close to $4K new. Asking $2000 obo CML5 motor, used once from new as an iris motor on a feature film, comes with 0.8 pitch gear and spare cable. New Price on B&H $2640 + backup cable $180 = $2820 Asking $1200 obo CML4 Motor, used once on a feature film, comes with 0.8 pitch gear and spare cable New prince on B&H $3190 + spare cable $180 = $3370 Asking $1500 obo Shipping out of New Zealand

DM me with an offer, note that 2 motors have already sold

2 x M21VE-L Sold, Remaining: 1 X M26VE High Torque Spec 1 X M26VE Standard 1 X M21VE-L

see title Thanks Ben R

Just found another M21VE motor that had unresolved issues and retired. Will include this as well at no additional charge of the package is purchased as a whole - could be good for spares or may even be able to be resurrected.

Hi, having a clear out, spare Heden motors available. These were used as backup / alternatives to Preston on a HU3 / MDR3 system. 1 X M26VE High Torque Spec 1 X M26VE Standard 3 X M21VE-L Range of accessories as in photos including, loads of standard gears (various gear pitch), wide gears, offset gears, oversize diameter gears, long throw rod brackets, 15mm, 5/8th PV and 1/2 inch insets, etc. Can also throw in a couple of motor cables too if needed. Please Note, I no longer have the means to test these motors so can't report back on noise, etc. All I can say is they were working when I last used them. Would prefer to sell as one lot, but open to breaking up if not. Shipping from New Zealand Open to reasonable offers Any questions please ask. Thanks Ben Rowsell +6421999515

Cinetape also sold