Ross Coscia

sold

sold

I replaced my batteries this spring and can offer my previous set. I have 10 Broadcast Camera Battery (BCB) batteries with 160 watt hour capacity. They are over 4 years old and have been in routine service in that time. They have exhibited a substantial drop-off in run time, in fact, 2 no longer hold much of a charge. I can't guarantee how long the remaining eight will provide sufficient power but for now they are serviceable. All show signs of normal wear and a couple of the shells are coming apart as well. I don't have a good gauge as to what used batteries are worth but I'm open to offers. I'm asking $40 per battery  but would part with all 10 for $350. They seem to charge on any charger I put them on but I can sell a charger as well if buyer needs. 

I'm offering these as local pickup only. Please contact me with questions.

Ross Coscia / 818 284 5172 / rwcoscia@gmail.com

Cleaning out my garage, I came upon all the docking brackets I used with my last sled. They have been sitting in storage for a couple years and I'm finally confident they can go. 

The list:

• GAD2 docking bracket (complete) https://steadimoves.com/product/gorelock-1-2-complete/
• Mag-Dock https://steadimoves.com/product/mag-dock-1-2/
• 2x 1.79" collars https://steadimoves.com/product/gorelock-2-new-style-docking-ring-call-d-sizes/
• 1x 2" collar
• 1x 3/4" spud (extra)

Retail on this will cost you over $1800 before tax and shipping. I'm asking $1600. Everything is in perfect working order with normal signs of wear. I'm happy to ship anywhere at buyers expense. Feel free to contact me with questions.

Ross Coscia / 818 284 5172 / rwcoscia@gmail.com

sold.

$9500

Sold.

Dropping the asking price to $10,000.

Sold.

I'm selling a Transvideo 8" Cinemonitor HD Evolution 3 XtraBright Enhanced monitor. Included is everything that comes with this monitor new. I have 2 of these monitors and no longer want to carry such an expensive backup as these monitors are bullet proof. I've never had to use my backup or had any issue with visibility. This one was purchased new in September of 2018 and was my primary monitor until recently. I've decided to find a cheaper backup monitor as these monitors are over $5,000 new. It is in perfect working order with only minor signs of wear on the body. Included:

• Transvideo 8" e-SBL monitor (S/N 18JS0028)
• instruction manual
• hdmi cable
• usb cable
• hd-sdi cable
• Pelican case with foam inserts

I can also provide the original mounting hardware that comes standard on the monitor (not pictured). As I mentioned, I paid over $5k for this monitor new (I can provide the invoice as well). I'm asking $4,300. I'm happy to ship anywhere at buyer's expense. Please feel free to contact me directly with questions.

Thanks, Ross Coscia

818 284 5172 / rwcoscia@gmail.com

This kit has not seen much use in recent years so I can't justify keeping it. I sold the MDR-2 a while back and with it most of the cables from this kit. I am keeping an MDR-4 for my steadicam so this is what's left over. Everything is in good working order with normal signs of wear and tear. The list includes:

• Preston HU3 (S/N 1399, includes cover plate and hand grip)
• 6x Preston HU3 Focus Rings
• Preston Digital Micro Force 2 (S/N D25619, includes HU mounting arm and HU power cable)
• 2x battery charger
• 3x Sony HU batteries
• 1x Paddle with quick release
• 3x Preston DM-2 motor (S/N 5301, 5312, 4287)
• 11 Focus gears
• 3x PAM motor mounts (includes 3x 15mm & 3x 5/8" captive reducers)
• Pelican 1600 case (custom foam insert)

I'm asking $12,000 but I'm open to offers. Please feel free to contact me directly with questions. I'm happy to ship anywhere at buyer's expense.

Thanks, Ross

818 284 5172 / rwcoscia@gmail.com

I have decided to sell this system as I haven't put it to work in over a year. The entire kit was sent in for service at the very end of 2018 and given a clean bill of health. Thanks to the pandemic, it has seen very little action in the time since. There is evidence of wear and tear on all components but no structural damage. I'm asking $10,500. I'll gladly ship anywhere at buyer's expense. Below is a break down of the contents. Please feel free to contact me directly. 

818 284 5172 / rwcoscia@gmail.com

Teradek Case

• 1x Tx SN 99600440
• 1x Rx SN 99700598
• 1x Rx SN 99700599
• 1x Array antenna with yoke
• 1x Rx cradle with gold-mount battery plate
• 5x Array cables
• 2x baby pin mount
• 2x Tx antenna
• 10x Rx antenna
• 1x Tx mounting bracket
• Assorted Tx 1/4-20 mounting bolts

Camera Essentials divided pouch

• 2x 2-pin to 2-pin power 
• 2x 4-pin to 2-pin power (XCS sled power)
• 2x Panavision power
• 2x P-tap to 2-pin power
• 2x straight BNC
• 2x curly BNC
• 1x USB
• 1x HDMI
• 2x AC power

Everything has sold.

This sled has sold. The XCS HD Digital Level is still for sale however. I'm asking $6500. The level comes with case, cables, and cd.

Thanks for your interest.

Sold.

I have a 6" Transvideo x-sbl for sale. It's in Perfect working order. It's lived in a case for the past year as a backup. I fly the 8" model and want a second one for efficiency. I bought this monitor second-hand for $4000 about a year ago. Comes with case, original paperwork, and cables. I'm also including the "ears" for the Tiffen Universal monitor mount. There is an anti-glare film on the screen that shows some minor blemishes. However, the glass is flawless. Please contact me with questions or for additional photos.

Local pickup is preferred but will ship at buyer's expense.

Thanks,

Ross

818 284 5172

rwcoscia@gmail.com

Some items pictured aren't for sale...

Hi folks,

I've got an MDR2 for sale. $1200

I've got an assortment of cables for it as well including the Cinetape cable.

Cables:

PRO sled to MDR2 power (2)

Panavision 2 pin Lemo to MDR2 power (2)

3 pin Fischer to MDR2 power (2)

Cinetape cable

3 pin Fischer command cable (2)

Panavision command cable

$1500 takes everything. Price negotiable and willing to sell separately. Local pickup preferred but willing to ship at buyer's expense. Please contact with questions or more photos.

rwcoscia@gmail.com

818 284 5172

It's what I use currently and I'd like to get one as a backup.

Thanks,

Ross

Here's an updated list with more pictures and prices.

XCS Ultimate II components:

• Upper Camera Platform
• Ultimate Gimbal
• 2" Telescoping carbon fiber post (custom 16"-26" length)
• Lower Electronics Housing
• Preston Universal MDR bracket
• XCS HD-PDL Plus

Additional Parts:

• XCS Sliding Adjustable Dovetail Plate (2)
• Arm Posts (1)
• PRO low-mode bracket
• Monitor Cables (1)
• Hill docking rings (2)
• Original parts bags (additional screws, etc.)
• Gimbal tool
• 5/32 T-wrench
• Ultimate II case

I'm asking $24,000 for the sled and $8500 for the HD-PDL. The level is the "Plus" model with stabilization software. Prices are negotiable.

Hi friends,

I'm looking at tailoring my Preston kit a bit and I am curious about everyone's experience with Heden motors. The size and cost of these motors would make them seem like a no-brainer but I was curious if there was a reason they are far less common. Are there speed or strength issues?

Thanks, 

Ross

Still available.

The Cinetronic monitors have sold as well as the monitor support arm.

The head has been sold.