-
Posts
15 -
Joined
-
Last visited
-
Days Won
1
Posts posted by Andrea Falcucci
-
-
Thank you @TJ Schnaidt!
-
On 11/27/2021 at 4:44 AM, Kevin Jacobsen said:
xarm Has been widely adopted overseas, haven’t used but it’s a light arm that can take heavy loads. Can’t speak to the nuance of performance
Following the list @Jeffrey Rosenberg wrote, I suppose @Kevin Jacobsen referred to ArmX1 for this review I quoted here. Just a tiny help for avoid confusion. Cheers!
-
On 12/3/2021 at 3:50 AM, DaShawn Bedford said:
Thank you so much for sharing your knowledge it’s nice to find a place to ask questions. So I just got the same system that you have and the problem that I’m having is what mode do you put the ronin in and could you share some of your settings.
Hi! If you received the Matrix R2 and you need some assistance or suggestions on how to place ronin or balance it before using it on Matrix R2, feel free to ask!
Sincerely
Andrea
-
On 12/20/2020 at 11:02 AM, David Thomas said:
Only two in that list to choose from.
FlowCine XArmNB Stabiliser Arm.
The other two are huge skipsI can't speak for AVDONIN arm since I'm a manufacturer (SmartSystem) and for this reason I'm extremely biased since I personally designed and patented the ArmX1 in 2010.
I don't want to publicly promote our system but can I gently ask to you which are the features that let you define it a huge skips?
Have you ever tried our ArmX1 before?
If yes, in which occasion? Trade show or via a retailer? Did you test it extensively on a film shooting?
Thank you so much.
-
On 3/31/2018 at 6:04 PM, Christian Ramirez-Coll said:
3A, PRO ARM (Titan & Atlas?), Arm X1: .625 (5/8")
In case other user will search for this info, also Arm X1 has 0.625 (5/8") arm post.
-
Hi Zachary
Lurking on the internet I found this post that deserve an answer for whom could be interested on our system.
In May 2019 we upgraded the Arm X1 with a new springs (special design and material) that greatly improved the performance of the arm extending also the load capability.
We launched these new spring on CineGEAR 2019. Your arm was assembled few months before so your kit was composed with old springs (silver and gold)
Since the mod was universal for every arm manufactured since 2010, you should felt a completely new arm responsiveness with the new springs (Blue and Black)
We are working on various tutorials to help operators to fine tune the Xtune in order to get always the best results.
Keep you posted!
-
Hi guys
we are very happy to invite everyone to test or to touch with your hands our SmartCAM ARM X1, one of tiniest stabilization arm in the market but able to carry up to 70lbs and with the ability to change on the fly the springs and to adjust the dynamic response of the arm.
We will carry also our Matrix Sled in its latest revision, our Vest Lite and other products and accessories at next CineGEAR in Los Angeles 31 May - 1 Jun.
You'll find us at Booth 153B - New York Streets
https://cge19.mapyourshow.com/7_0/floorplan/?hallID=E&selectedBooth=153B&shareguid=31D63443-E6F9-BBB1-7C4F03DD4B09F0E0
See you in LA!
-
On 3/30/2019 at 1:52 PM, Tom Rogers said:
They fall under the heading of Garbage that you don’t want
Hi Tom I'm Andrea, CEO and Senior Engineer inside SmartSystem.
As technicians, we are always happy to receive feedback. Especially, the negative ones push us to find better and "smarter" solutions... always.
As you know, the world is a perfectible place. For this reason, can I kindly ask to you if tested our system and where? Maybe we met somewhere in some exhibition? What you found wrong or bad and what could be considered good?
Sincerely
Andrea
- 1
- 1
-
Hi Adam
Yes we were in Paris for Stabilizer Event 2018 with Arm X1 and Matrix R2 (especially designed for Ronin2) equipped with Horizon monitor System.
About your direct request, I've found that someone asked to your question Facebook at this link
Hope this helped
Sincerely
Andrea
-
Hi to all.
Lurking on internet we found this old post.
Maybe someone could be interested to this photogallery regarding 3D Shooting with 2x RED Epic Cameras.
Equipment used :
2x RED Epic Cameras with Mattebox and GENIUS 3D Rig
1x LCD 7" monitor
4x V-Lock Batteries
SmartCAM ARM X1
SmartCAM Matrix Sled Complete Pro
SmartCAM Vest Lite
Happy 3Ds!
Andrea
-
Hi Folks,
we'd like to share with you a
about a video made by an italian Steadycam operator (he owns a steadicam pilot, as reference) with our equipment.Equipment used:
Arm : SmartCAM Arm X-lite
Sled : SmartCAM Mini Sled Extreme
Vest : SmartCAM Vest Lite
Camera : Panasonic GH2 & Sony PMW-EX1
Monitor : Swit 1070HS
Andrea.
SmartSystem
-
thank you very much for your attention, the guys from easy steady has done a good offer to me , and i'm considering the importance to have assistance and direct contact with the manufacturer here in italy... so now is even more difficult to choose
thank you stefano for your suggestion about smart system, but now i'm focused more on the easysteady
Hi to all guys and thank you very much Stefano!.
As I said in other posts, We are available for any explanations you might need.
Thanks to the new Live Chat Software installed in our website, you can get info, quotes, news and everything you need in REAL TIME.
I suggests to check it out our gallery, especially the RED Camera one.
Best Regards
Andrea
SmartSystem
-
Hi to All!
The 'Matrix' Sled? It's well named anyway.
Thank you chris!
The 'Poppy' Sled, the 'Buttercup' Arm, the 'Chinchilla' vest, would just never do ;)
Not So Professional, isn't it? :lol:
As you can see, we are an Italian Company developing professional Professional Video Products.
We are available for any explanations you might need. With best regards
Andrea
SmartSystem
-
hello!
how to join in?
thanks!
factory italian see
http:www.smartsystem.it
http://www.smartsystem.it/video/en/gallery/38-immagini/85-test-vest-arri-master.html
Hi to all!
Lurking on the web, I found this topic.
My name is Andrea Falcucci and I'm the SmartSystem CEO.
As you can see, we are an Italian Company developing professional Professional Video Products.
We are available for any explanations you might need. With best regards
Andrea
SmartSystem
New Firmware update for SM7 PRO 3G
in Monitors
Posted
Hi to all!
Hoping to be helpful to all the customers that will read this message, we just released a first big new firmware update for SM7 PRO 3G monitor making it more stable and reliable especially at low frame rate like 23.98/24.00/25.00.
At the same time, this new release firmware adds also new configuration settings for Tally making it compatible with different polarity circuitry (direct and reverse).
Another cool and useful add concerns the possibility not only to define the dimension of the crosshair but also the thickness. Very useful when the monitor is not so close to the operator (like when mounted on sled).
To make this new firmware more recognizable at first sight, we changed the color accent on the term "PRO", now in RED.
The upgrade is simple and straightforward via Burner software (PC/Mac) downloadable at www.smartsystem.com/software. At the same URL it is possible to download the relative software manual, in case of necessity.
Before upgrading, it is important to grant a stable power supply to the monitor and connect it via XTDongle (in bundle with the monitor) after the completion of the boot stage.
Our tech department is always at customer side for any information needed.