Matthias Biber

I´m selling this on behalf of a friend. Sachtler telescoping moitor arm for 1,5" posts. It is in very good condition. Spent most of its life with the backup monitor in the box. asking price: 400 EUR + shipping (new 625 EUR) Bezt tools dovetail monitor mount, used. asking price 120 EUR + shipping (new 195 EUR) contact: steadicamera@gmx.de

The Quattro Monitor Arm http://cam-jam.de/qma.html is the connection between the monitor on the one end and the centerpost on the other end. You don´t need any other rods or arms. it clamps the rods in front and back of the centerpost, so it is much stronger than the other arms The "Yoke only" from http://cam-jam.de/yoke.html is just the connection between your existing arm with a 1/2" spud and the monitor. Works with XCS, PRO, Sachtler, Betz, MK-V arms.

for that reason the alexa bracket from http://cam-jam.de works with your existing dovetailplates

bump

Have a look at the Quattro Monitor Arm from http://cam-jam.de While designing I had 3 main goals: - reduce vibration - yoke is adjustable to any angle with solid locking. yoke always stays centered (side to side wise) - friction contorol mechanics at the tils axist of the monitor (no thumbscrews that will come loose when you tilt the monitor) works with cinetroic 1 and 2, transviedeo 6" and 8", marshall and others

bump

looking for a decimator 1 or 2

Just pull out the rods with the monitor attached. Then it is a tool free hinged clamp around the post with special mechanics to align all 4 rod calmps. No need to take anything of your rig.

the Quattro Monitor Arm from http://cam-jam.de mounts that monitor to any rig

The new monitor bracket from cam-jam.de is available. It is extremly strong, as it connects to the centerpost at 4 points in front and back of the post. It´s design itegrates the yoke, that is great for LCDs. It is no retrofit from an old CRT monitor arm, that uses several spud adapters to mount a yoke. Friction control mechanics at the monitors tilt axis. No thumbscrews that come loose when you tilt the screen. Very fast lowmode!! For more details, pics, videos and pricing visit http://cam-jam.de/qma.html Introduction price is valid only for a short period.

http://www.steadicamforum.com/index.php?showtopic=17644&hl= is this what you are looking for?

Want to breakdance? Just watch your center of gravity.

The new monitor bracket from cam-jam.de is available. It is extremly strong, as it connects to the centerpost at 4 points in front and back of the post. Its design itegrates the yoke, that is great for LCDs. It is no retrofit from an old CRT monitor arm, that uses several spud adapters to mount a yoke. Friction control mechanics at the monitors tilt axis. No thumbscrews that come loose when you tilt the screen. Very fast lowmode!! For more details, pics, videos and pricing visit http://cam-jam.de/qma.html

Have a look at the new Quattro Monitor Arm from http://cam-jam.de/qma.html Very strong, comes with an intrgated yoke for different monitors.

bump

the yoke from http://cam-jam.de/yoke.html cam-jam.de works with the different marshalls, Transvideo HD 6 and 8 and cinetronic 2 The yoke is adjutable to any angle. It has friction control mechanics on the tilt axis of the monitor, so no protruding thumbscrews that always come loose.

bump

http://cam-jam.de/alexa.html works with alexa and ENG cameras

http://www.ebay.de/itm/Cinetape-Mount-for-Arri-Alexa-RED-Epic-Steadicam-/181143305249?pt=Filmnachbearbeitung&hash=item2a2cfb7c21 also available directly for the maufacturer http://www.cam-jam.de/cinetape.html

bump

bump

I have a nice accessories mounting bracket in the for sale section. http://www.steadicamforum.com/index.php?showtopic=17644&hl= It was designed for a focus receiver, but takes everything else with a female thread.

bracket in use: dovetailplate and bartech are not for sale

bump

price is listed on the website http://cam-jam.de/alexa.html