Matthias Biber
Premium Members-
Posts
85 -
Joined
-
Last visited
-
Days Won
11
Everything posted by Matthias Biber
-
The alexa bracket from http://cam-jam.de now fits to ENG cameras. It replaces the sony VTC 14 plate. It´s lighter, thinner and vibration-free. Still fits to Alexa witout any additional brackets from the rental house. Upgrade for existing Alexa brackets is possible. check out at http://cam-jam.de/alexa.html contact: stadicamera (at) gmx.de
-
Jamie, yes, the cam-jam.de yoke will work with the cinetronic 2
-
Bracket for focus receiver / mdr
Matthias Biber replied to Matthias Biber's topic in Steadicam Marketplace - For Sale
price dropped 150€ -
from the specs, the cam-jam.de yoke should fit as well. http://www.cam-jam.de/yoke.html I´ll make the right screws and shims, when the DP7 really comes out.
-
This bracket mounts the display to the viewfinder mount of a alexa or red (epic, scarlet, one), that use 19mm viewfinder rod. Keeps the display at the same two positions, right or left, so easy to rebalance the steadicam. Also works WITH viewfinder. After using mine for a while and due to demand from ACs and Operators, i made a few of these brackets. More information: http://cam-jam.de
-
Antlers from Missing Something? Technologies with three different weight settings and three different post heights. This the extendible version. Minimum length 67 cm max. length 95 cm. Some cosmetic scratches but all in all in excellent working condition. The item is located in Germany. So EU import tax is already paid. 550€ + shipping worldwide contact: steadicamera (at) gmx.de
-
Brand new, I got 4 of these made for me and some colleagues. This one is left for sale. Fits 19mm rods, 15 mm light weight standard and 15 mm rods on dovetail plates with narrow spacing, like pro and xcs. Compatible with bartech, c-motion, arri and everything else that has a 3/8" or 1/4" mounting hole. It keeps the receiver with the camera not with the rig. Very useful for quick change from and back to the rig. asking 180€ or best offer contact: steadicamera (at) gmx.de
-
I had a broken m-one (potentiometer) years ago. The promised 3 day turnaround took 3 week in the end. Now my potentiometer broke again. After reading all these stories, I decided to reair it myself. The part is available from electronic supply but it needs to be modified on a lathe. It is a quite expensive and high quality part, so you don´t expect it to break that often. In my motor the main bearing was manufactured with waaaay too much bearing play. So all the load, was held by the potentiometer shank, instead of the bearing. This lead to the repeated failure of the potentiometer. The bearing parts were re-engeneered to the right size (tolerances here are 1/100 mm, my beraring was 2/10mm !! too big) Now I have a working motor and eliminated the reason for the potentiometer failure. Yes, it is possible to repair a m-one, but it is really not straight forward.
-
Alexa anti vibration bracket for sale
Matthias Biber replied to Matthias Biber's topic in Steadicam Marketplace - For Sale
bump broadcast adapter coming soon. So this bracket will give ENG Cameras the same solid mounting as it already gives to the arri alexa. -
Alexa anti vibration bracket for sale
Matthias Biber replied to Matthias Biber's topic in Steadicam Marketplace - For Sale
bump -
Alexa anti vibration bracket for sale
Matthias Biber replied to Matthias Biber's topic in Steadicam Marketplace - For Sale
bump -
Watch out for vibrations. Especially with a heavy battery on the back of the camera. Use a bracket that locks down the back Sony style hook. e.g. cam-jam.de
-
Alexa anti vibration bracket for sale
Matthias Biber replied to Matthias Biber's topic in Steadicam Marketplace - For Sale
bump -
Alexa anti vibration bracket for sale
Matthias Biber replied to Matthias Biber's topic in Steadicam Marketplace - For Sale
there is enough space to drill offset holes, but the bracket is made as low as possible (that is essential to keep your post short) so the height for the 19mm rods in the bridgeplate would too low. -
Alexa anti vibration bracket for sale
Matthias Biber replied to Matthias Biber's topic in Steadicam Marketplace - For Sale
bump -
adapter for nebtek solar7 is now available! www.cam-jam.de
-
I´m selling this for a friend. asking 650€ + shipping. was new 890€ Works with nearly every monitor. In very good condition. It is made for 1.8" post size (47.3 mm) and comes with an insert for 1.5" post. The small dovetail that allows quick disconnect from the monitor is also included. contact: steadicamera(at)gmx.de
-
Alexa plate version 2 for back haevy setups
Matthias Biber replied to Matthias Biber's topic in Brackets/Widgets
Dear colleagues, The alexa bracket is available ,now. I set up this basic website, to provide all information and an order form. www.cam-jam.de Feel free to send me an email, if you have any questions . Best, Matthias -
Alexa plate version 2 for back haevy setups
Matthias Biber replied to Matthias Biber's topic in Brackets/Widgets
Here is a photo of a real setup with a codex. It is balanced. The bracket weights roughly 250g / 0.5lbs The setup is light in the front: ultraprime lens, only one focus motor, 2 stage LMB-5, no filters, no cinetape, no mdr. In the back, there is even a bebob hotswap still on the camera, that keeps the codex 1,5" further out as it should be. Unfortunately there was no codex mountig brcket available, so it is fixed with a focus rod and a motor brcket and some rubber ties. Not ideal, but good enough to test the balance. If you look at the photos in the other back-heavy thread, no one is that far to the back. I´ll also offer an extension kit that allows mounting the dovetail further back. Still using the sony hook. The new bracket is good for regular and front-heavy setups as well, as it uses two mounting points. This will give more stability and reduce vibration. This pic is for demonstration only. Setup is not balanced! -
Alexa plate version 2 for back haevy setups
Matthias Biber replied to Matthias Biber's topic in Brackets/Widgets
my pic above is for demonstration only. It is not a real setup. Put on the rig like that, it would be very front heavy. It just shows how far you can go to the front with this bracket. Did not have a codex when i took the picture and unfortunately did not take a picture when i had the codex. Sorry for that. -
It took a while until I had my first Alexa- Codex job and saw the need for a bracket, that allows more fore – aft adjustment. So I built this one, as I was not happy with the already available ones. These are the advantages: - ZERO height is added - no need for the arri V-wedge or other parts supplied by the rental house - lock down of the sony style hook in the back with quick release. This also eliminates a possible source of vibration. - light weight - large fore – aft range with many mounting holes. Back heavy setups can be mounted. Center of gravity of the setup can go back to the 2nd R of the ARRI logo. - works with YOUR dovetail plate with arri spacing, that already fits your topstage. There are different tolerances from different manufactures. So I tried to avoid making a new dovetail. Anybody interested, please drop me a line at steadicamera@gmx.de The bracket will be available very soon and of course black anodized Price is not fixed yet, but will be more reasonable than some other, bigger plates
-
the link is working now. sorry. yoke website
-
http://vimeo.com/35033740 does anybody know how to embed this video on the forum?