Search the Community

2013 EFP HD Steadicam package $22,500 90% all new material. Overview: SLED: 12/24 volt capable triple IDX battery mount that can slide back for better balancing 2 post, carbon fiber posts MarkV 3A/EFP stage like new New Original EFP gimbal Articulating one arm monitor mount 7" SD 16X9 LCD monitor with power/video cable docking ring docking/balancing bracket for c-stand 1650 Pelican case with plucked foam Upper j-box: *3x HD BNC connectors 1x BNC IN 1x BNC OUT BIG 3pin Lemo camera power connector with 12 and 24 volts(same as Tiffens so you can purchase their camera power cables if needed quickly) 4pin XLR power connector with 12 and 24 volts (if you like to make your own cables or just want to save $75 and use a common XLR connector instead of the expensive LEMO) 2x 2pin Lemo 12v power connector for accessories 2x 4pin Hirose 12v power and video in one connector for accessories Lower j-box: *3x HD BNC connectors(non-stop run from the 3x HD BNC connectors on the Upper J-box) Video distribution amp inside lower j-box(splits Standard def NTSC signals keeping them at full strength) 15 AMP breaker for ON/OFF 12/24 volt switch( choose between keeping all 3 batteries at 12Volt for extended run time, or select 12/24v to run 24 volt film cameras as well as your 12v accessories) 4x BNC OUT connectors 1x BNC IN connector 2x 2pin Lemo 12v power connector for accessories 2x 3pin Lemo 12v power connector for accessories 2x 4pin Hirose 12v power and video in one connector for accessories 2x 6pin Hirose 12v power and video in one connector for accessories ARM: Luna arm 15-70 lbs. total weight capability arm bag 1 year warranty from Luna VEST: lightweight iVest(similar to a combination of a 3A vest and a Master Series vest) steel socket block all black cam lever buckles upgradable 1650 pelican case to carry arm, vest and accessories big Allen t-handles wrenches for arm 2 Allen wrench sets combo screwdriver camera mounting screws compact 2-piece travel c-stand that fits in case 25 lbs. sandbag Package price is $22,500 *can upgrade to custom cut foam for $250 additional All that is needed is camera power cables and IDX batteries to start operating. I have a used battery package for sale. 3 stackable IDX E-10 batteries and a dual charger for $1000. All sales are cash only. Everything above is in stock and ready to go except the arm which I do not stock. Once I receive payment I purchase or order a Luna arm that is typically in stock. If the arm is not in stock it usually is only 1-3 weeks out. Please call me anytime, 818-795-4433. Located 1 hour from Burbank, CA USA Email me for more photos of entire package, not enough space to post here. Sincerely, Kyle Young steadiapolis@hotmail.com 818-795-4433