Search the Community
Showing results for tags 'Mickey'.
-
Take everything (13 items) for $800.00US or individual items, prices below: 1. Canatrans NTSC Transmitter S/N 1001 New $1500.00 - Asking $400.00 US Comes with two Antennas and 1 Ptap Power Cable. 2. XCS Alexa Adapter Plate New $450.00 - Asking $250.00 US Attaches to the bottom of the ARRI BPA plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity. 3. XCS/BPA for ARRI Alexa New $200.00 - Asking $100.00 US Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates. 4. RedByte Decimator Version 1 DownConverter Asking $100.00 US Comes with 1 hirose power cable and 1 A/C adapter. 5. Bartech Analog Receiver Matte Box Mounting Bracket New $200 - Asking $100.00 US 6. Two Bartech Analog Gimbal Hard Wired Focus Modules (2) New $100 each - Asking $80.00 for two Plugs directly into receiver and has a small finger wheel to dial focus. 7. Mickey Dynamic Level for 2 inch Post New $120 - Asking $50.00 US The Vinyl wheels are a little worn but it still works. 8. PRO Low Mode “J” Bracket Asking $50.00 US 9. XCS Transmitter Bracket New $150.00 – Asking $50.00 US Attaches to the dovetail on the rear of the camera plate and on the lower electronics housing of the Ultimate sled. Keeps the transmitter at the highest point at all times. 10. PRO DB2 MDR2 Dovetail/Bracket Mount Asking $50.00 US I don’t have any screws. 11. Steadicam Gimbal J-7 Zoom Control Asking $50.00 US Comes with Hirose to 8 Pin Canon and 12 pin Fuji 12. Teradek Bolt Pro Fanless Receiver Cage for TV Logic VFM-056WP monitor and battery plate with hole for Lemo Socket New $100 for both – Asking $50.00 US Designed by KarWai on Shapeways. Brand New never used. More details here: http://www.shapeways.com/product/6SFVMU3LH/teradek-bolt-cage-fanless-rx-for-tv-logic-vfm056?and http://www.shapeways.com/product/H5PFD2T76/tvlogic-battery-plate-with-lemo-power-socket-v2-1?li=more-from-shop&optionId=41548180 and http://www.shapeways.com/product/H5PFD2T76/tvlogic-battery-plate-with-lemo-power-socket-v2-1?li=more-from-shop&optionId=41548180 13. Camera Comfort Cushion New $60.00 – Asking $30.00 US Comes with two pads. Please email me mike @ mikeheathcote.com
-
I have a few items for sale. Best Offer. - Mickey Dynamic Balance Tool - XCS Transmitter Bracket - Arm Rain Cover - J Bracket - H Bracket for Preston MDR and DB 2 T Bracket mount. (no screws) Please email: mike@mikeheathcote.com Thanks.
-
Just a tip for Zephyr owners who are not using the bottom 1/4"x20 battery/accessory mount and who want to try the "Mickey" / 90 degree dynamic balancing method for getting the bottom half of the rig balanced: Turns out the 1/4"x20 tap is coincident to the axis of the post (thanks Tiffen engineering!). A short 1" or so 1/4x20 screw, bearing with 1/4" internal diameter, and a nut allows you to "do the Mickey" incredibly easily. The Zephyr lower post isn't round, so the external roller method isn't going to work... Just screw 'em in there, and hold the post up by the bearing at 90 degrees as mentioned elsewhere. Top stage empty and centered. Spin, adjust, add weights as necessary. Works like a charm! Apologies if this is mentioned elsewhere... and not sure if other sleds have this particular mounting location as well. -Chris
- 2 replies
-
- Zephyr
- dynamic balance
-
(and 1 more)
Tagged with: