Search the Community
Showing results for tags 'PRO'.
-
PRO Gen 2 Battery Rack All AB mounts, allow for aftermarket sized batteries to fit on the front mount. Serviced by Jack last year, cared for and protected from sand/ rain on sets. Comes with one jumper block and the accessory rack and spacer to clear larger batteries on the top rear mount. ••XCS PDL not included.
-
PRO DBIII for sale. Serviced and tuned up by Jack at PRO and not used since. Includes MDR mounting bracket, as well as an MDRII specific bracket, and tune up tool. These D-Box's are great pieces of equipment. $3200 Paypal or cash buyer pays shipping 323-251-8284 los angeles
-
PRO DBIII for sale. Serviced and tuned up by Jack at PRO and not used since. Includes MDR mounting bracket, as well as an MDRII specific bracket, and tune up tool. These D-Box's are great pieces of equipment. $3200 Paypal or cash buyer pays shipping 323-251-8284 los angeles
-
Selling off a few items: XCS TB-6: $3000. As many of you know I love this monitor. It just works. And you can see it under any conditions and from nearly any angle. Duo-frameline generator model. This monitor was gone over by Greg Bubb and the XCS engineers and given a 100% clean bill of health back in November of 2015. I used it for a few weeks after that and then it has been in a Pelican and unused. I did go down in the rig with this monitor (it was examined by Greg after the fall) and it has the tiniest scrape on the bottom of the rear housing. Other than that cosmetic imperfection, the monitor is A-1. XCS PDL: $1500. Analog. You know what it is and you know it's a workhorse. 8 pin in and out. Decimator Downconverter (1st Gen). 2 of them with power cables from the PRO sled. $250 each. Work seamlessly. Never had a problem with either. No power cycling these puppies! Buy the TB-6 and PDL together and I'll sell as a package for $4000.00 Gen 3 Battery Rack (does NOT come with electronics): $4500 (will include all 3 jumper blocks for this price -- they are $160.xx each from PRO) Used this for a few years. Been sitting in a Pelican for about a year. Terry West drilled one tiny hole in it (obviously in an area where it would have no impact on structural integrity). Has Anton Bauer plates. With all three jumper blocks, and factoring in tax, this package is a $1520 savings over buying new. http://www.xcsinc.com/ultimate/ult_compnts_TB6.html http://s781.photobucket.com/user/B-263-54/media/Steadi/IMG_2293.jpg.html (PDL) All gear located on the Westside of Los Angeles. No Paypal. Not happening. We can meet and go to the bank. If I know you, like really well, I might consider cash ;) I have First Entertainment and also have Wells Schmargo. Many of you know I'm a stickler for keeping my gear in top-top shape. These items fall under that description. Cheers! Last pic has the small hole with the bottom half highlighted in white -
Original Owner. Both Upper and Lower SD Junction Boxes with Center Post Cable. Great condition. No Jumper Blocks included. Contact with best offer. Dave 818-679-5263 or dave@cinekane.com
-
Hi, I sell my first rig when I started. It's a very good one for the small configurations. the list of the package : - telescopic sled (upgrading HD) - arm with 6 canisters (5 to 13 Kg) - back mount vest - monitor - camera cables - tools - docking bracket + stand - flight case It's in very good condition and was never in rental. Maybe it's possible to add two V-lock batteries + charger in the package Price: € 3.500 + Tax + Shipping (will sell worldwide, but Europe is easier of course as this equipment is based in France - Paris). Please let me know if you need more informations and/or photos and/or details. here is my contact : hello@staedup.fr best regards N.
-
Backup equipment package for sale : the list of the equipment : - 1 Pro 2 sled + accessories (HD upgraded) - 1 XCS Gimble (perfectly centered) - 1 Luna arm + accessories (13-63lbs / 5.9-28.6kg) ( http://www.steadyrig.com/prod_Arms.html ) - 1 Steadicam Ultra2 vest + bag - 2 Tansvideo superbright cinemonitor III monitors (brightness : 1000 nits) - monitor support arm XCS - 1 electonic level bubble Marell - 1 up converter SD/HD AJA - batteries + charger - Scorpio FIZ 3 motors with 2 remote + many power and camera cables - 1 Tx/Rx wireless video Titan (upgrading 10 channels) - many cables - J bracket - 3 jumper blocks - recorder mount - docking bracket - stand - flight cases Everything is in very good condition and was never in rental. All packed in two Peli Cases with handmade inlays and one bag. Price: € 28.000 + Tax (€ 2.000) + Shipping (will sell worldwide, but Europe is easier of course as this equipment is based in France - Paris). If it's possible, I don't want to sell this equipment separately. Please let me know if you need more informations and/or photos and/or details. here is my contact : hello@staedup.fr best regards N. Attached Images
-
Hi all, I bought a brand new Titan Arm last summer. After 10 weeks shooting in Morocco, it needed to be cleaned up. When I built it back after cleaning, and screwed each canister in his bone, I've seen some trouble with 2 of them. On both higher and lower section of the arm, the upper canisters are jiggling. Before that, they always had been stucked in place, no jiggling. Of course I've tried different canister in different arm section. It's always the upper canister that is moving. I can't find a way to fix this. Any idea's welcome! Thanks!
-
Getting rid of excess equipment. Selling Items below as 'One', this stuff has been with me awhile so it's USED but It's in relatively good shape and works. Buyer takes all. Will consider selling some items separately. Buyer pays for any shipping. Email me with questions. Thanks 1. MK-V 2" Super Post. 4 Stage telescoping carbon fiber post extends from 21"- 72". MK-V V2 Gimbal MK-V V2 Telescoping Monitor Arm - PRO mount MK-V V2 Lower D-Box & Upper J-Box (SD) MK-V V2 Battery Base (SD) w/AB Mounts MK-V Docking Bracket PRO Donkey Box III w/ Preston MDR II T-Bracket Case 2. PRO Battery Base II (SD) w/AB Mounts 3. PRO I Monitor, Green Screen (SD, does NOT come with Bracket) 4. XCS TB-6 Monitor & PRO Monitor Arm 1.5" (SD Green Screen, slightly scratched) Inspected on 10/16 - Replaced front push button switches, Preformed basic checkout. 5. XCS Level Price $11,640 Dave Luckenbach luckenbach@mac.com
-
Guten Tag! i am selling a Bolt 2000 Dual-Input (SDI&HDMI In/Outputs) TX+RX Set in a very good condition. including: 1x Bolt 2000 TX 1x Bolt 2000 RX 1x P-Tap Cable 1x Power-Supply 7x Antenna 1x Case 1x SDI Cable 1x HDMI Cable (should be the original content) located in germany 7.500 USD or 7.000 € +shipping (+VAT if necessary) i try to make some pictures within the next days also available: 2nd Bolt 2000 SDI/HDMI Receiver Teradek Sidekick Companion Receiver SDI pfiats eich, Karsten
-
If you have one laying around, please send me an email. Also looking for a PRO to Decimator Power cable. Thanks. charlyvandedrinck@hotmail.com
-
PRO 2 HD sled Up graded to HD (cramped Attic) Post and Upper J-box is original style (bolted) DB-2 XCS monitor bracket Cinetronic Gen 1 monitor (HD &SD) (Very Bright and good weight) Monitor cable power EBX level (SD) Camera plate A few power cables Old style CP steadicam docking bracket Pelican 1650 sled case Decimator gen 1 This is my back up rig. I've used it for years and it all works as it should. All item are in GOOD used condition. Buyer pays shipping. All gear located in NY. Buyers are welcome and encouraged to check items out in person. PM me here and I give you my personal contact info. More photos and info available upon request. $11500
-
1 – GPI PRO 5” High Intensity GEN III Monitor including Frameline Generator – S/N 010 - Including Rain Cover. Only slightly used and in great condition. Asking 950.00 or best offer. Buyer pays shipping costs. Pics below. If interested, please Email me directly: david.kanehann@gmail.com
-
G4 Blue Dot Preston MDR-2 + Cables and Pro Steadi Bracket $4,000 - Preston Cinema MDR-2 G4 SN 2402 - Pro DB3 MDR2 Steadicam bracket Power Cables: - MDR2 to 3-pin Lemo Power (x2) - MDR2 to Panavision 2-pin Power(x2) - MDR2 to P-tap Power (x2) - MDR2 to Pro 4-pin "vid/pwr" - MDR2 to Pro 3-pin "cam pwr" - MDR2 to Pro 4-pin "focus" jack pwr Run Cables - MDR2 to Epic Run cable (female bnc version) - MDR2 to Arri 3-pin Lemo Run Cable - MDR2 to Panavision 10-pin run Cable - MDR2 to Red One run cable - MDR2 Cinetape Interface Cable- Please email mbfuchs@gmail.com if interested. Also selling a Bartech "Buzz" unit for gimbal zoom control. Thanks, Mike
-
Hello, I'm selling my backup black canisters. Located in Spain Brand new 2x black canisters (never used). New style without window. Buyer pays shipping. (2,400USD or 2.200€) Regards
-
Tvlogic 5.6 with canon battery back 4 battery and charger The batters are a few years old but rarely used not sure of there condition. The monitor always had the screen protector on and was seldom used. I’m selling to upgrade to a 5.5 with and underwater housing. It comes with power cable to P-tap. It HD SD HDMI can cross converts. HDMI to HD. it loops thru as well. It's a great little monitor. New this is package was $1400. $700 Black Magic Design Hyperdeck shuttle This was test to see if I’d use it. I ended up not using it. But it worked well. The plates do not pass power thru. The new owner could easily wire it. One 240 GB drive included. - around $500 invested Make offer Alexa insert plate $100 new make offer Cinetronic Gen 2 monitor bracket make offer Chrosziel ENG camera bracket - $1000 NEW Make offer Cinetronic level post mounting bracket (fits XCS as well) - Make offer XCS Alexa Plate - $450 new Make offer Camera Plate - $150 new - Make offer PRO monitor Bracket - $1200 new - Make offer PRO SD center post cable - Make offer Grand channel receiver - Make offer 4 PRO post docking rings (1- red, 1- black, 2 blue) - Make offer G-zoom rarely used - $900 new Make offer Transvideo Hercules SD video receiver -- Make offer MODULUS 3000 -- Make offer XCS GIMBAL SLEEVE 1.5 IN POST - $1400 new(i think) Make offer there is a dent on the bottom of this sleeve it does not affect the function of the sleeve, per Greg Bubb's evaluation. PRO 4 IN WRAP GRIP - Make offer PRO GIMBAL SLEEVE ORIGINAL STYLE - Make offer HD CENTER POST CABLE. I bought this cable thinking I’d upgrade my sled myself. Well I wimped out and had a professional do it. - Make offer All item are in GOOD used condition. Buyer pays shipping. All gear located in NY. Buyers are welcome and encouraged to check items out in person.
-
Anyone have one they are willing to part with? No need for a cable just the centerpost.
-
3 x PRO Anton Bauer Battery Modules for Battery Rack Gen III All are in great condition...see photos below. $900 If interested please email, text, or call. Thanks! Scott (213) 880-2550 scott.camera@mac.com
-
PRO Long Gimbal Handle - Handle Only (No Bearing Assembly, Mounting Hardware, or End Cap) - Used very little and in Great Condition PRO Short Gimbal Handle - Handle and End Cap (No Bearing Assembly or Mounting Hardware) - Some signs of wear but still in Great Condition $650 ea If Interested please email, text, or call. Thanks! Scott (213) 880-2550 scott.camera@mac.com
-
GPI PRO II Sled for Sale Donkey Box III VZ Gimbal Telescoping Center Post Upper J Box Lower J Box Battery Rack Gen II (AB) Recorder Mount Pro Monitor Arm Fixed Pro Monitor Arm Clamp 3 Jumper Blocks SD Sled7" Dovetail Plate Docking Collar Pro Docking Bracket GPI Pro Tool Kit: Gimbal & Post Wrenches, T Handle Allen Wrench Sled is in Very Good Condition $14,800 ---------------------------- GPI PRO Vest ***Brand New Condition*** for Sale Includes 2 Sets of Pads: Waist 32" & 38" Was purchased for a Documentary Film Dual pads were provided for DP and Operator This vest was literally used for two days of shooting $4800 ---------------------------- Shipping is not included. I do accept credit cards with an additional 3.5% fee. Please email or call with any questions or offers. JeffZach@mac.com 760-505-7011
-
Hey fellow ops, im planing to buy Gpi pro Titan arm with 4 canisters after selling my G50.I want to fly from small cameras like dslr to heavy cameras like alexa with all accessoires. Which 4 canisters do you advice to buy 4 blues? or 2 blue 2 blacks. I just can afford for 4 canisters not more. i know having them all is a great idea since they sell it for higher price if i decide to buy them seperately later on,and i also saw the weight chart on their website. just want to take some advice from fellow operators who use the arm, and are experienced. Thanks
-
Looking for a GPI PRO Gen 2 or 3 lower electronic box. Must be HD and have bayonet mount. I do not need the battery hanger or jumper blocks. Cheers!
-
I'm selling a set of 9 re-celled 'chocolate bar' GPI PRO batteries, all LED dispays are working and come with a custom Calzone case. Also a Hawk-Woods MR 4 rapid charger and cigar lighter adaptor, UK and US charger cables and 4 battery to charger cables included. Price GBP£2250.00 ONO buyer pays shipping.
-
Three PRO camera plates for sale. They are all 7" plates $125 for all three, plus shipping. paypal or local pickup only domestic buyers only. 323-251-8284
-
I'm in the process of getting my CineLive kit all finished and I'm in need of a Monitor, Batteries and Charger, and PRO cables. Monitor: SmallHD DP7 Pro High Bright or really anything else that will become a backup/director's monitor when I can get the new Transvideo Stargate. Batteries & Charger: Anton Bauer Dionic HCs and a suitable charger (preferably a quad simultaneous charger) PRO Cables: I need to power a Teradek Bolt Pro Tx and a Digital Bartech Rx Thanks everyone, Michael
