Search the Community

Hey there, I have a Tiffen M1 Top Stage with Tilt. 3 HD/SDI Lines, 2 D Tap 12V 5A, 2 lemo 3 pin 12/24v. Purchased August 2017. In excellent working condition, some small cosmetic marks. Brand new $6,375.00 USD asking $5,000.00 USD OBO. Buyer pays shipping. Located in Toronto, Canada. Please message or email mike @ mikeheathcote.com. Thanks! Mike

TIFFEN FAWCETT EXOVEST I switched a while ago to a Walter Klassen Harness and after more than a year I no longer need a second vests. I've bought it in 2014-2015, it is in well maintained condition - works flawless. I've replaced all pads recently, so those are pretty new. The Vest will come with a lot of spare parts (set of extra hip pads, neck pad busters and stuff) and a Walter Klassen adapter block (WK arm mounting option/backmount). For inquiries shoot me an e-mail at steadicam@jschenten.de I'm asking 3300 EUR (buyer pays for shipping and any upcoming money transfer fees) Shipping within EU prefererred

Hi everyone, I'm on the lookout for a sled. I'd love it to have 24v power and three battery plates. My budget is around 15k. Located in the US is preferred. I'm NY based. I appreciate any leads. Thanks and happy holidays. reach me here or by email: kylemparsons@gmail.com

Tiffen Master arm for sale. Great arm capable of heavy payloads. Only selling because this is my second Master Arm and I don’t need two. It comes with 5”, 12” and Zephyr posts. Will ship at buyers expense. If you’re in LA feel free to come test it out. Call/text me: 267.334.0964 Located in Los Angeles. Asking $4000

Hi All, I'm Selling my Zephyr kit The arm and sled have just come back from being serviced by Tiffen. Has some blemished and scratches but everything works perfectly. Only selling because I upgraded. $7000 Located in Detroit, MI. Willing to ship, Buyer pays shipping. More photos can be viewed here - https://drive.google.com/open?id=11ktvSvNraUAKbveOHnngcUu_K3R-2TkB Here's everything that's included Sled w/gold mount Arm w/ fleece bag Standard Vest Thermodyne Roller Case (Fits entire package) Sky Magic Monitor yoke 1/4 20 monitor mount Steadicam/Marshall Monitor Second battery mount (gold mount) Low mode Bracket Balancing weights Docking bracket Dovetail plate with screws 1 Hirose to 4-pin XLR/sdi monitor Cable 2 SDI cables 3 pin to Red Epic/Scarlet 3 pin to Alexa mini/Amira cable 12v 3 pin to female P-tap Cable 3 pin to Red One Cable 3 pin to 4 pin XLR cable

Morning All, I have a Steadicam Zephyr in excellent condition for sale. (London Based) It's a year old and has mainly been used on studio locations. I am selling this rig to help fund the purchase of the Steadicam Shadow V. I have been advised about the price. I'm looking for £8,500 as it's only a year old. The rig comes with all the original bits and will have a full service at Optical Support. The Zephyr can hold up to 30lbs, which is a decent Sony F55 camera rig, Alexa Mini and Red. In the Box: Steadicam Zephyr Vest 2 Stage sled No-tool Zephyr Arm 3 pin Power cable for stage Operations Manual BNC's With the rig comes a rolling C-Stand for ease of manoeuvring the rig while built. For enquiries please call me on (+44) 07775508420 Look forward to hearing from you Luke

1400 Nits In Excellent Condition. Great Daytime Visibility. Free from scratches and blemishes. This Monitor was Lightly used. Priced at: $1700 USD. Tiffen HD UltraBrite2™ 8.4” TFT Color Monitor is HD/SD SDI (SMPTE 259,274/292/296), DVI, Y/C, PC VGA and Composite video monitor exclusively designed for Steadicam® and field production use. Compatible with any stabilizer system. Features 1400 nts (cd/m2) of brightness and the use of a proprietary bonded AR glass coating, the HD HD UltraBrite2™ can be viewed under the most extreme lighting conditions. • Selectable Color Temperature (9300K / 8000K / 6500K / 5000K). • Brightness/Contrast/Color/Tint/Sharpness/Gamma Adjustable. • Portrait/Landscape Image Rotation. • Vertical and Horizontal Image Flip Capabilities. • Adjustable Image Scaling, 4:3, 16:9, 2.35:1 Anamorphic, Under scan and more. • Control settings stored in non-volatile memory. • Automatic video format switching. • Isolated video inputs. • Picture-in-picture (PIP). • Non volatile memory storage of monitor settings. • Dimmable dual Tally light indicators for studio applications. • Selectable OSD Menu Language Support. • AR Glass for Direct Sunlight Viewability. • Standard _-20 and 3/8-16 tripod screw mounting holes, and optional yoke with rod mounts. • Mounting screws located on back cover for mounting of external V-loc battery adapter. • Front panel LED power indicator. • Programmable Direct Access Menu Buttons. • Fully software upgradeable for special applications or future options. • Built-in frameline generator • Instant on feature that powers up monitor without pressing additional buttons. • Integrated 10-LED horizon display. • Wide support of SDI, HDSDI, RGB, YPbPr, YCbCr, SVHS, Composite NTSC/PAL/SECAM, DVI-D, and RGB video formats. • Unique dual chamber aluminum case design to help dissipate internal heat and keep electronics cool without the use of a fan. • Ergonomic cable connection layout to help prevent cable snags Monitor has two input sources for power: 4 pin XLR or 8 pin Lemo. Please text or call... 760-505-7011 Thank you

Hi everyone I'm selling my Tiffen G70x Arm. Despite the signs of usage (see attached pictures) it is in a perfect working condition. Includes: 1. Tiffen G70x Arm (max payload 32kg) 2. Arm Post for Tiffen and Pro/Betz/Artemis etc. and custom made posts in two sizes also for Pro/Betz etc. 3. Rain and Dust cover for both sections 4. Original bag I'm asking: 10500 € EUR The arm is in Berlin. Buyer pays for shipping and money transfer fees (paypal etc.) Please note: I cannot ship the arm before 27 Oct 2018 For inquiries please E-mail me at: info@ozzyoksuz.com Thank you Cheers

Tiffen – Steadicam – Archer 2 – For Sale I am selling my rig because I am no longer doing Steadicam for a living. Focusing on that underwater stuff these days. Complete Kit - $19,000.00 (I do not want to part it out, it goes complete) Pick-Up in Los Angeles (15 minutes South of LAX) Buyer Pays For Shipping if needed The whole rig was serviced in Fall of 2015. It has only been used 5 days since the service. Main Components -Archer 2 Sled with camera plate, Anton Bauer battery mounts, Non-Motorized tilting stage. 12V or 24V output (Also providing V-Lock mount plate so you can convert the sled if needed) -Marshall V-LCD70XHB-3GSDI Monitor -G50 Arm (full upgrade done by Tiffen) -LX Vest -Thermodyne Case that will hold vest, arm, sled and accessories for travel Accessories - Jerry Hill Docking Bracket with standard and low mode brackets - Standard Steadicam Docking Bracket that came with Archer 2 - Low Mode F Bracket - Low Mode Camera Bracket - Low Mode Camera Cage - Double V Lock Battery Plate for sled to replace with Anton Bauer (if desired) - Turtle Stand with transport bag - Original 7” SD Monitor with Yoke that came with Archer 2 - Turtle Styled C-stand - 2 Hex wrenches for vest - Jerry Hill Standby Cover - Anton Bauer 4 pin Snap On Plate-XLR 8165-0101 - 6” Post (total length from end to end) - 3 1 lb. weights for sled - 1 5lb. weight for camera - Steadicam WHM-BG Artificial Horizon Module - Camera Essentials Cable pouch - Assorted screws for plate, weights, sled and gimbal - 3 short BNC cables - 3 3 pin Lemo to 4 pin female XLRF cables (12V Power) - Tiffen 3-pin 12 “Y” cable (so you power horizon module and monitor) - Arriflex to Modulus 24V cable - Tiffen 6 Pin Lemo to a 3 pin Lemo cable - 3 Pin Lemo to 2 Pin Lemo cable - 2 Extra Vest Buckles

*Posting for a friend* Selling my well cared for G-50 arm. Recently serviced and is up to tiffen standards and ready for a new home. Has some cosmetic scratches on the outside but nothing major. Would like to sell in LA but am open to selling worldwide, buyer pays shipping. $6250 Arm is in LA **Email for inquires: jamesmarin8888@gmail.com

Hi, I'm looking for a vest, preferably a GPI PRO or a Tiffen Exovest. Also looking for Arm post for G70/Artemis Sachtler sled (same diameter as PRO sled) Thanks!

Sled Arm + (Bag Arm) Vest Steadistand Flightcase Docking Bracket post 6" Provit F Bracket low mode Small HD 5"+ Accesories Dovetail plate Extension Strap kit Allen Tool Channel SDI 12/24 volts

Steadicam Ultra Cine Complete Package FOR SALE Complete Ultra Series kit all you need package to get started, so great for someone looking for their first rig. Not had a lot of use in the time I have owned it but well looked after and arm was last serviced at Optical Support. I bought this kit in 2015 and before me it was rental gear owned by ProCam. Apparently last job it went out on was Kickass 2 or so I was told. The kit comes with lots of cables to power both Arri and Panavision film cameras, and also Arri Alexa. Older RED ONE power cable which could be updated to work with epic/dragon. CASES · Large Hard wheelie case for Sled + Monitor · Large Hard wheelie case (can fit vest + arm and more) · Smaller Hard Case for cables + various bits · Wheel case for Arm - Branded Browning 5015 but it is exact same as Peli 1710 (foam is fresh/uncut) SLED · Ultra Cine Sled (motorised top stage + wireless remote) · 4 section Carbon Fibre Composite Telescoping Post with range from 28” to 71” ( 71cm to 180 cm ) · Upgraded to HDSDI · 12/24v Battery Mount V-Mount · Tilt Head (+ or – 20 degrees from horizontal) · Frame line generator (only when in SD) MONITOR · 8" Ultrabright2 HD Composite Monitor · HDSDI to SD down convertor Black Magic Mini (works with all cameras red/alexa/sony etc) ARM + sleeve · Ultra Arm 20 – 50lbs · Tool free side to side adjustment · 3 x arm rods 3” + 6” + 12” Recently serviced by Optical Support VEST + bag · Ultra Vest · Titanium Socket Block IDX VLOCK BATTERIES · 6 x IDX HL9 Batts · 1 x 1550 Peli Case · 1 x Hawkwood Plate dtap/hirose (VL CA2) · 1 x 4way VL-4S Charger + kettle lead VIDEO CABLES (see pics) · Various Lengths of BNC – mostly skinny from a few inches to 6’ long POWER CABLES · 2 x Arri (1 is 12v and 1 is 24v) · 1 x 12v 4pin · 2 x PV · 1 x RED (red one) · 1 x unidentified · 1 x unidentified STANDS · Lightweight C-Stand · American Stand with 8” Pneumatic Wheels MISCELLANEOUS Sand Bag Long Dovetail Plate Short Dovetail Plate (low mode) Low Mode Slanted F-Bracket Arri Alexa Plate Sony VCT Plate Brass Weight plate Small lead dovetail lead weight 4 x Screw, 3/8-16 2 x Screw, ¼ -20 Tiffen Docking Bracket + bag Stabilizing Vectran Line 4x 15mm rods RAIN COVERS · Ultra Arm Protective Covers, Dual Section · Ultra Bottom Sled Cover & Battery Protective Covers VEHICLE HARD MOUNT + case · Mitchell/MOY base + removable keyway · Socket Block + damage to plastic tie nuts, but still works fine WINDKILLER + sleeve · Hardly used Sunbounce Pro Windkiller I will also include · Arri Medium size Bag · Various BNC pieces · Cable Pouches · Blue space blanket · Various allen keys + tbar tool · Steadicam Operator's Handbook · Ultra Series Manual + Brochure And finally my VHS practice camera (see pic mounted on sled) Works great with the brass weight plate and is similar to a full build amira in weight. Recorder works great so you can practice at home and watch back your shots. I have converted the power so it works with regular V-Lock batts and the camera also comes with a case. ASKING £16000.00 Thanks for looking, please contact me on here or direct to andrewbradley@live.com KIT located in Portsmouth, UK. Thanks Andrew

I'm selling a steadicam scout kit bought it for a single project,i don't need it anymore. used for one month... located in switzerland arielsalati@hotmail.com Camera Mounting Chassis (Sled) w/removable base Telescoping Centerpost (18.5-32in/47-81cm) with large-diameter Delrin knurled Gimbal handle Active Matrix 16:9 / 4:3 Color LCD HD monitor 5lb. to 18lb. Camera Capacity Iso-Elastic Arm Lightweight Vest Battery Mount IDX V- mount Docking Bracket 12V Power Cable 3 ft. light weight BNC video cable Dovetail Plate 5/32" T-Handle Allen Wrench Hard case 3750 USD OBO plus shipping paypal (plus paypal fee) bank wirement

***[selling for a friend]*** Steadicam Aero 30 with custom Peli case 1630 and C-Stand. I’m selling my Steadicam Aero 30 that I’ve owned and used for the last year, it comes with everything needed, in a pelican case with professionally designed and cut foam. Everything packs up into the case for easy transport! Included: - Steadicam Aero Sled (V-Lock battery plate) - Steadicam A30 Arm - Steadicam Zephyr Vest - Steadi-stand (C-Stand) - Aero docking bracket + All cables that came with the rig Everything is in very good condition, there are very slight signs of use on the sled, but this rig has been very well cared for and is in near new condition! Bought new for: £6200 Asking price: £5500 Rig is located in West London. Any questions: roberthayward2@gmail.com Phone: 07748653735

Steadicam Clipper 324 Kit in excellent condition. I purchased this kit new from Lemac after a SMPTE show. Selling due to very little use, 3-4 times in year. Check out photo to confirm. Sell $25K USD Full genuine rain covers Extra cheese dovetail plate Extra screws Extra thin BNC cables F-bracket Manual UltraBright Monitor w/Level indicator & overlay Custom cables Quad Charger & Power Cube Batteries American Steadicam Stand Refer to photos for further details. https://www.dropbox.com/sh/so25iumlcwu8mo9/AADlq5eim0LhSMVl68qtWfUpa?dl=0

Hi there. I was going through some old things and found this unused arm post adapter. It is meant to go into an older Master series arm, with the spiral thread, and ends in a 5/8" post that can slip into a Pro or XCS gimbal. I originally bought this for a Master series arm I owned but have since sold and upgraded to Pro/XCS. No use for this post anymore. It has never been used, anodizing still fully intact. Ordered from Tiffen a few years ago. According to Tiffen price list, this part costs $189 USD. I'm looking for $150 USD or make me an offer. It is brand new. Located in Toronto.

Hello all, I'm currently doing the proper research to assemble a rig in the near future, and I've tried out numerous vests and these two are my favorite so far. Just want to know if anyone has had any particularly good or bad experiences with either, just to help me weigh out my options. Thanks!

Interested about what are the good and bad reviews about the almost 3 years old on the market M1. Share please!

Parting with my Master Series Sled. Asking $3,500, but will accept equipment trades of equal value. -12v/24v Toggle Upgrade - HD/SDI (1 HD line, 1 SD Line) Down the Post Upgrade - 2x Anton Bauer Plates - Marshall 7" HD Monitor (V-LCD84SB-AFHD) - 15mm Telescoping Monitor Bracket - Master Series Dovetail Plate - 1x 1.580 Hill Docking Collar For Trades: I'm interested in DSLR Canon L-series glass, small G&E Gear, 4x5 and 6x6 filters, tripods, carts, camera assistant tools and accessories, monitors, etc.

Hi, Im selling my great Flyer LE. The Rig in complete without batteries y charger. The sled was upgrade with one chanel Hd-SDI. Sled,arm,flight case,vest,Stand, docking, plate, allen key, bag arm. Accesories: Extension strap kit, provid F bracket, Gimbal post 6. Monitor Smallhd DP6 (SD, HD, components,etc). Playload 19 lb (85 kg). Sled work to 12/24v. Asking 4100 Madrid (Spain) Pm gersamxl@gmal.com

Purchased directly from Tiffen september 2016. Ex-Demo G70 with X Upgrade. Standard use marks and scruffs. Arm flys perfectly fine. Comes with transport sleeve. Asking for 8400 USD Shipping worldwide via Fedex, DHL or Hong Kong Post. The arm is located in Hong Kong. Shipping estimate rouhgly 250 USD Payment via telegraphic bank transfer. PM me or email me directly at nathan.w@thinfilmhk.com Thanks! Note: The small knob to tighten arm post has fallen off, can order spare part directly from Tiffen. Also one of the rubber bumpers fell off from the heat. Can be replaced from hardware stores of directly from Tiffen.

For sale, Tiffen Steadicam Car Mount. This good condition and fully functional. Only some cosmetic blemishes but besides that all good. Only used a couple of times. it includes the full size socket block, also in good condition, I used it with my Ultra 2 Rig. Asking $900. Jon

G70 Arm in excellent condition, with soft bag. Original owner, purchased from Steadicam in 2012. $12,000 USD or Best Offer Arm is located in Burbank, CA and can be dropped off at Tiffen for inspection.

Hi there, I'm just wondering if anyone has a Tiffen M-1 (Non Tilt) Top Stage they might be willing to sell or trade for an M-1 Tilting Top Stage. Please email me. mike @ mike heathcote.com Thanks. Mike