Search the Community
Showing results for tags 'arm'.
-
Hello everyone, I just want to compile a list of arm post sizes. Please add or correct me when I am wrong: Master Series, Ultra, Shadow, M1: .725 (3/4") 3A, PRO ARM (Titan & Atlas?): .625 (5/8") Flyer, Pilot, Archer, ProVid: .500 (1/2") Thanks.
-
Hi, Newbie here, I'm currently looking for an arm right now and I've been doing a bit of research. Does anyone have any experience with the following arms? - FlowCine XArm - NB Stabiliser Arm - SmartSystem Arm X1 - AVDONIN A5 Arm Quite frankly I'm really looking towards the traditional G70(x) arm but they're not always available in the market, like hot singles in my area.. I'm willing to give these new arms in the market a try as beginner arms and eventually have them as back up arm. They're just super far from where I live and also no demos these days (Covid). The data is only as good as it's presented on their website and I can only find really limited resources and testimonials. Please let me know if anyone has any opinions about those arms. Thanks! (Leaning towards SmartSystem and NB)
-
Hi there! Fairly new to steadicam, I have a zephyr rig and the arm post I was given was around 4 inches / 2.54 cm. I'm 4'11" or 149cm and most of the projects I have been on the subjects have been at 5'6" at the shortest. For the most part, I was just lifting my rig and barely putting weight on my arm in order to get to their eye level which makes the arm sort of useless. I was told by a friend that I should get longer arm posts and have found only one website on it so far but I could be missing something. Any tips on where I should start looking ? What's a good range of sizes for someone my stature? How I should go about traveling with several of these on me? I use a large pelican for the arm, vest, and dock while the sled I carry by itself. Thanks guys!
-
Attached is a pdf that explains how to change the Latex bands on an Aigle Concorde G6 Vision arm. If you can afford to change the bands by Aigle, I suggest you do it, but if you cannot, this is how I did it. AIGLE_CONCORDE_G6_VISION__ARM_–_DISMANTLE.pdf
-
Hi all, Putting my trusty Master Arm for sale after a thorough service at MK-V. In great shape, flies smooth and true. Asking for £4500 or nearest offer (+ VAT if applicable), located in London. Includes: Long and short arm posts for the large Tiffen size (3/4"). Solid aluminium 5/8" arm posts for use with Pro/MKV/Artemis/M2/Betz/XCS/etc sleds GPI Pro Low-mode bracket Arm Sleeve Cheers for looking, E
-
Arm in Perfect working condition - Since 2019 I've only used the arm as Backup Arm. Buyer Pays Shipping and Taxes by PayPal 3750€ Lisbon, PORTUGAL -
Tiffen Steadicam G-70X - For sale
Planning Camera posted a topic in Steadicam Marketplace - For Sale
Arm G-70x bought in February 2018, still under warranty for 1 year from Steadicam Tiffen. Comes with arm post for Steadicam gimbal 3/4 and for others gimbals like PRO 5/8. With Arm soft bag. Used equipment in good condition based in Paris. Looking for 11 500 € or $ 12 700 – buyers in the France will have VAT added, overseas please be aware of any import duties. If you are interested, contact us by email vente@planningcamera.fr
-
Hi everyone. First of all I apologise in advance if I make any spelling or grammar error. I'm from Spain. Lately I've been having problems with my aero-30 arm making creeking noises. I would like to know if there is a special oil/lube I can apply or if something like WD-40 would work. Back in January, the arm might have gotten a bit wet due to sudden rain. But I'm only having the problem lately so I doubt it has anything to do with that. Thanks a lot!
-
Selling my G70X Arm. Located in Denmark. Includes bag and rain covers. €7660 / $8500
-
Arm Case for a pro, brand new. Literally brand new. Had it made by master case last week and it just doesn't fit into my kit the way I had hoped. The case retails for 215 without the foam. Asking 300.
-
For the G-70x owners. I’ve made two videos in an effort to share everything I know about the arm. I did my best to make them as comprehensive as possible, so they’ve turned out quite a bit longer than I’d planned, but it’s my hope that they might help a new user of the arm get started, and introduce a seasoned user to some potentially new ideas for tuning and maintenance. Please bear in mind that these are my own opinions, that they may or may not be correct, and that you assume all personal risk to your arm if you choose to disassemble your equipment. If you are unsure about anything, don’t do it, and send you gear in for professional maintenance and repair.
-
Selling a Clipper 312 Sled with the upgraded G50 arm. The package shows little signs of wear as its been one of my main rigs over the years but still is in great condition. This rig has 3 HDSDI lines and 1 Analog through the post. The arm also shows some cosmetic wear but has recently been serviced and is in good working condition. This gear is located in NJ/NY, will ship worldwide (buyer pays shipping) **This Clipper 312 is compatible with the new M1 Volt intelligent horizon assist system ** **Vest Not Included** Will provide more detail upon buyer request. $28,000 USD Clipper 312 Components: -Three Section 1.5 carbon fiber post (sled extends 26-49in or anywhere in between) -v-lock dual battery pack -low profile tilt head alters the lens angle +/-15 degrees -G50 arm (lifting from 12-50lbs) boom range of 32 inches -Transvideo 8” Monitor Super Bright Additional Parts: -TV Logic 5” LCD (HD/SDI, HDMI & Analog Input) -Power Cable with Custom bracket for TV Logic Monitor -6” arm post -6 IDX V-lock batteries -IDX Quad Charger -Low-mode bracket -docking Bracket -Monitor Cable -Custom Tally Cable -Gimbal Tool -Clipper 312 Rain Gear -Clipper 312 Case (1 lock broken) -Pelican Custom Storm Case iM2975 (Accessories and Arm) -
In search of a well used titan pro arm or a well priced G70x arm. Doesn’t need to be the cleanest, just needs to function well. Please email me at rjpcamera@gmail.com
-
This arm is in great shape and purchased in December of 2018 from Zach Price. Right before it was purchased, it was completely overhauled by Robert Luna. 50lb weight capacity and has served me very well. Feel free to message or email me at djditt@mac.com Asking $4,200 OBO + Shipping. I'm located in Birmingham, Alabama
-
I'm looking for a post extension for my A30 arm for my zephyr. I know they make these for the heavier weight arms but I haven't seen anything for the Zephyr. Any guidance would be appreciated.
-
Hi All I’m just putting feelers out there to see if anyone wants to offload their Old/spare arms :) I’m not flowing in cash, hence why I’m looking for an older model, so if you have a efp/3a/steadyrig silver spring arm/g50/or anything similar feel free to shoot me a private message, or email me at jtesoh@gmail.com. Based in Melbourne, Australia Thanks! Joel
-
Looking for a used g50x arm. I'm in Brooklyn, NY and willing to pay for shipping.
-
I'm selling my Flow Cine X arm, I have a number of Arms and this one isn't being used so it must go. This is an exceptional arm for those in the market. Never used in the field, price is 9200 Euro's or equivalent in USD. Buyer pays for shipping and customs duties. I wish all companies where as generous and considered as Flowcine, it comes with heaps of extras and parts. You won't be disappointed. Please PM for any additional information or photos. Gear is located in Australia
-
Hello everyone!! I'm looking for an original GPI PRO Titan arm located in Europe, I'm based in Barcelona. I need 4 blue canisters and 2 black ones, although I wouldn't mind have 4 and 4. Will be nice if the package contains accessories like J bracket for low mode and different posts, but I'm not close to see some offers. You can contact me by here, or directly to my mail: hola@aos.camera Thanks so much in advance!! Alberto. -
Hi, I'm sell my backup arm: 3A ARM w/ LUNA SPRINGs and all UPGRADES The Titanium springs have a load capacity of 6-32kg (13-72lbs) . The arm has slight signs of wear, but is in very good overall condition, fully functional, cleaned and lubricated. Located in Berlin, Germany. Can be tested on site. Serial: #303 Price 4.900 EUR + shipping. Please message me for any question, Chris
-
Ops who've used both the G-70X and the G70 with the X upgrade, have you noticed a difference in performance or reliability? Any other differences noticed?
-
-
Master Series Arm in excellent cosmetic and mechanical condition Fully serviced by Luna in 2017 and lightly used since then, this arm has a lot of miles left in it I have one 6.5" Arm Post for Steadicam Gimbals and 3 Arm Posts (4.5", 8.5", 11.5") and Low-Mode Bracket for PRO/XCS Gimbals $4700 with Steadicam Arm Post $4800 with all Arm Posts and Low-Mode bracket Pelican case is included. Buyer pays shipping (located in LA)
.thumb.jpg.524d00970722e9c8e7ca006a0614ea69.jpg)
-
For Sale: Titan Pro Arm 6 Canisters (2 black, 4 Blue) Custom Case 15,000 US Dollars
-
Quick note to let you all know, Our Demo Arm is now on it's way back home from Canada to Janice Arthur in the States, and will be available from September onwards. In the meantime, Happy Flying to all of you! Kind regards, Hugo Langer Rig Engineering Melbourne, Australia. Rigs Can Fly.
.thumb.jpg.d2c52e8fe0adcccad53c46002f1244fe.jpg)
.jpg.cd92cc2873719ada8530203ea61a576b.jpg)
